scholarly journals Impacts of Nanosilver-Based Textile Products Using a Life Cycle Assessment

2021 ◽  
Vol 13 (6) ◽  
pp. 3436
Author(s):  
Hani A. Abu-Qdais ◽  
Muna A. Abu-Dalo ◽  
Yazan Y. Hajeer

Due to their properties, silver nanoparticles (AgNPs) are widely used in consumer products. The widespread use of these products leads to the release of such nanoparticles into the environment, during manufacturing, use, and disposal stages. Currently there is a high margin of uncertainty about the impacts of nano products on the environment and human health. Therefore, different approaches including life cycle assessment (LCA) are being used to evaluate the environmental and health impacts of these products. In this paper, a comparison between four different AgNP synthesis methods was conducted. In addition, four textile products that contain AgNPs were subjected to comparison using LCA analysis to assess their environmental and public health impacts using SimaPro modeling platform. Study results indicate that using alternative methods (green) to AgNPs synthesis will not necessarily reduce the environmental impacts of the synthesizing process. To the best of our knowledge, this is the first study that has compared and assessed the environmental burdens associated with different nanosilver-based textile products at different disposal scenarios. The synthesis of 1 kg of AgNPs using modified Tollens’ method resulted in 580 kg CO2 eq, while 531 kg CO2 eq resulted from the chemical approach. Furthermore, the manufacturing stage had the highest overall impacts as compared to other processes during the life cycle of the product, while the product utilization and disposal stages had the highest impacts on ecotoxicity. Sensitivity analysis revealed that under the two disposal scenarios of incineration and landfilling, the impacts were sensitive to the amount of AgNPs.

NanoEthics ◽  
2020 ◽  
Vol 14 (3) ◽  
pp. 271-283
Author(s):  
Christopher Nathan ◽  
Stuart Coles

AbstractIt has become a standard for researchers carrying out biotechnology projects to do a life cycle assessment (LCA). This is a process for assessing the environmental impact of a technology, product or policy. Doing so is no simple matter, and in the last decades, a rich set of methodologies has developed around LCA. However, the proper methods and meanings of the process remain contested. Preceding the development of the international standard that now governs LCA, there was a lively debate in the academic community about the inclusion of ‘values’ within the process. We revisit this debate and reconsider the way forward for LCA. We set out ways in which those outside of science can provide input into LCAs by informing the value assumptions at stake. At the same time, we will emphasize that the role of those within the scientific community need not (and sometimes, will inevitably not) involve value-free inquiry. We carry out this exploration through a case study of a particular technology project that sought ways to produce industrial and consumer products from algal oils.


2015 ◽  
Vol 26 (3) ◽  
pp. 389-406 ◽  
Author(s):  
Maria Francesca Milazzo ◽  
Francesco Spina

Purpose – The purpose of this paper is to quantify the human health impacts of soy-biodiesel production with the aim to discuss about its environmental sustainability. Design/methodology/approach – The integrated use of two current approaches, risk assessment (RA) and life cycle assessment (LCA), has allowed improvement of the potentialities of both in obtaining a more complete analysis. The implementation of a life cycle indicator for the assessment of the impacts on the human health, integrating the features of both approaches, is the main focus of this paper. Findings – It has been found that, although the biodiesel is a green fuel, it has some criticalities in its life cycle, which cannot be disregarded. In fact, even if biodiesel is essentially a clean fuel there are some phases, prior to the industrial phase, that can cause negative effects on human health and ecosystems. Practical implications – Results suggest some measures which can be adopted to substantially reduce human health impacts. Further alternative could be analysed in future to gain more insight about the use of biodiesel fuels. Originality/value – The estimation of the impacts of a process producing biodiesel has been made by using a novel approach. The novelty is associated with the calculation of the impacts on human health by using the transfer factors applied in RA. The use of such factors, properly modified in order to estimate the impacts on a wider scale than a site-dimension, allows defining a holistic approach, as LCA and RA are used as complete units but at the same time can be related to each other.


2014 ◽  
Vol 31 (7) ◽  
pp. 410-420 ◽  
Author(s):  
Paramjeet Pati ◽  
Sean McGinnis ◽  
Peter J. Vikesland

2020 ◽  
Vol 12 (8) ◽  
pp. 3460 ◽  
Author(s):  
Maria Rosa Trovato ◽  
Francesco Nocera ◽  
Salvatore Giuffrida

Energy consumption in public buildings increased drastically over the last decade. Significant policy actions towards the promotion of energy efficiency in the building sector have been developed involving sustainable low-CO2-emission technologies. This paper presents the results of an economic–environmental valuation of a standard energy retrofit project for a public building in a Mediterranean area, integrating a life-cycle assessment (LCA) into the traditional economic–financial evaluation pattern. The study results show that simple retrofit of sustainable low-CO2-emission strategies such as wooden double-glazed windows, organic external wall insulation systems, and green roofs can reduce energy needs for heating and cooling by 58.5% and 33.4%, respectively. Furthermore, the implementation of an LCA highlights that the use of sustainable materials reduces the building’s carbon footprint index by 54.1% after retrofit compared to standard materials, thus providing an additional increase in the socio-environmental–economic–financial results of 18%. Some proposals are made about the accounting of the replacement costs and the residual value as requested in the logic of life-cycle cost (that is the economic extension of the LCA), namely concerning the method to take into account the replacement costs and the residual value. The economic calculation highlights the fundamental role played by tax benefits supporting the building energy retrofit, also in temperate climate zones, thus allowing the creation of environmental benefits in addition to remarkable cost savings.


2015 ◽  
Vol 21 (5) ◽  
pp. 734-746 ◽  
Author(s):  
Katerina S. Stylianou ◽  
Martin C. Heller ◽  
Victor L. Fulgoni ◽  
Alexi S. Ernstoff ◽  
Gregory A. Keoleian ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document