Adsorptive Removal of Methylene Blue in Aqueous Solutions Through Raw and Modified Cantaloupe Peel Wastes: Kinetic and Isotherm Study

Since large amounts of agricultural wastes are produced in Iran and these wastes have lignocellulosic nature, the current study was performed to survey the adsorption performance of methylene blue dye from aqueous solutions by means of raw and modified cantaloupe peel. The adsorbents used were characterized using techniques like scanning electron microscope (SEM), as well as Fourier transform infrared spectroscopy (FTIR). In this study, the effects of a few key variables including pH, reaction time, dye concentration, adsorbent dosage and temperature on the adsorption performance were investigated. Optimum values were attained at 0.04 and 0.08 g doses of modified and raw cantaloupe peel, pH of 7 after mixing for 120 and 90 minutes for raw and modified cantaloupe peel, respectively. The equilibrium information was fitted to the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich equations and the respective data for all models were tested. An increase in adsorbent dose and temperature caused the efficiency to rise. The mechanism and rate of adsorption were ascertained by analyzing the experimental data at various contact times according to traditional kinetic equations: pseudo-first-order and second order, Elovich, and intra-particle diffusion. The findings illustrated that the data accorded closely with the pseudo-second-order model. Moreover, it was found that these wastes can be applied to remove environmental pollutants, particularly methylene blue dye.

Download Full-text

Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽

10.3390/molecules23092295 ◽

2018 ◽

Vol 23 (9) ◽

pp. 2295 ◽

Cited By ~ 10

Author(s):

Souad Rakass ◽

Hicham Oudghiri Hassani ◽

Mostafa Abboudi ◽

Fethi Kooli ◽

Ahmed Mohmoud ◽

...

Keyword(s):

Methylene Blue ◽

Aqueous Solutions ◽

Removal Efficiency ◽

Molybdenum Trioxide ◽

Second Order ◽

Blue Dye ◽

Order Kinetic ◽

Methylene Blue Dye ◽

Removal Capacity ◽

Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Download Full-text