scholarly journals Dynamic Power Oscillation Reduction using PSOA-PI in UPFC

2019 ◽  
Vol 9 (2) ◽  
pp. 3046-3050
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Test System ◽  
Pi Controller ◽  
Settling Time ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Facts Devices ◽  
Power Oscillations

The power flow control is one the important part of power system to maintain power system stability. If the real power and reactive power can be controlled then the automatic control of the power system gives numerous possibilities. The Flexible AC Transmission System (FACTs) are the devices meant for this operation. There are series and shunt type of FACTs devices available. The Unified Power Flow Controller (UPFC) is one of the best devices in FACTs devices in AC power system. The power flows can be controlled in series and shunt connections using the two converters. The power oscillations are common in UPFC when the reference powers are changed. The PI controllers are replaced with PSOA tuned PI controller to reduces the power oscillations and reduces the settling time. The problem is formulated to minimize the settling time of the power value. The series and shunt controllers are tuned with particle swarm optimization algorithm (PSOA) to tune the PI controller parameters available in it. The MATLAB Simulink version 2017b is used here for the analysis and well known UPFC test system with three generators are used here for testing the proposed method. The results show PSOA tuned PI controller provides better oscillation damping with reduced settling time.

scholarly journals Optimal placement of facts devices to reduce power system losses using evolutionary algorithm

2021 ◽  
Vol 21 (3) ◽  
pp. 1271
Author(s):  
Mahmood Khalid Zarkani ◽  
Ahmed Sahib Tukkee ◽  
Mohammed Jasim Alali
Keyword(s):  
Power System ◽  
Evolutionary Algorithm ◽  
Power Flow ◽  
Reactive Power ◽  
Research Work ◽  
Test System ◽  
Optimal Placement ◽  
Unified Power Flow Controller ◽  
Voltage Profile ◽  
Facts Devices

<p>The rapid and enormous growths of the power electronics industries have made the flexible AC transmission system (FACTS) devices efficient and viable for utility application to increase power system operation controllability as well as flexibility. This research work presents the application of an evolutionary algorithm namely differential evolution (DE) approach to optimize the location and size of three main types of FACTS devices in order to minimize the power system losses as well as improving the network voltage profile. The utilized system has been reactively loaded beginning from the base to 150% and the system performance is analyzed with and without FACTS devices in order to confirm its importance within the power system. Thyristor controlled series capacitor (TCSC), unified power flow controller (UPFC) and static var compensator (SVC) are used in this research work to monitor the active and reactive power of the carried out system. The adopted algorithm has been examined on IEEE 30-bus test system. The obtained research findings are given with appropriate discussion and considered as quite encouraging that will be valuable in electrical grid restructuring.</p>

scholarly journals Particle swarm optimization tuned unified power flow controller for power oscillation reduction

2021 ◽  
Vol 23 (2) ◽  
pp. 633
Author(s):  
Ananda M. H. ◽  
M. R. Shivakumar
Keyword(s):  
Particle Swarm Optimization ◽  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Pi Controller ◽  
Unified Power Flow Controller ◽  
Power Transfer ◽  
Swarm Optimization ◽  
Power Oscillations ◽  
Power Flow Controller

One of the best flexible AC transmission system (FACTS) is unified power flow controller (UPFC). As it gets more benefit from both real and reactive power transfer, it is used in power system for controlling the transmitted power. The UPFC controls the power on the transmission side of the power system. When the real as well as reactive power is set the UPFC tries to follow the command by using the proportional and integral (PI) controller. But in some power systems the PI controllers cannot produce the proper power due to the power oscillations. These oscillations are created due to PI controller properties. In this paper the PI controller is replaced with the particle swarm optimization tuned PI controller (PSO-PI). It minimizes the power oscillations by using the objective function. The MATLAB 2017b is used to demonstrate the power transfer curves and the voltages. The IEEE 9 bus system is being used as a reference system.

scholarly journals Modelling of Transformerless Upfc Toimprovepower System Stability using Optimization Technique

2019 ◽  
Vol 8 (4) ◽  
pp. 11456-11459
Keyword(s):  
Power Flow ◽  
Reactive Power ◽  
Optimization Technique ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Flexible Ac Transmission ◽  
Flexible Ac Transmission System ◽  
Facts Devices ◽  
Ac Transmission ◽  
Power Flow Controller

Generally, power system faces the problem to transfer power from one system to another system without any fluctuations, with minimal of system losses. To overcome this problems, a flexible ac transmission system is implemented in this paper. In present scenario, facts devices are used to reduce the transmission losses for improvising transmission capacity and also to improve the system capability. Unified Power Flow Controller plays a most prominent role in FACTS controller to improve the system stability. The structure of UPFC is combination of back-back converters with boosting and zigzag transformer. This type of UPFC system consists of high losses due to presence of magnetic properties in this transformer. With this, a transformer-less multilevel inverter based UPFC topology is proposed in this paper. This paper focuses on the modulation of transformerless UPFC with PSO, which controlsfundamental frequency for better controlling of active and reactive power, harmonic minimization, and improvement in efficiency of system by controlling DC link voltage

scholarly journals Artificial-neural-network based unified power flow controller for mitigation of power oscillations

2021 ◽  
Vol 24 (3) ◽  
pp. 1323
Author(s):  
Vireshkumar Mathad ◽  
Gururaj Kulkarni
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Power Flow ◽  
Reactive Power ◽  
Pi Controller ◽  
Unified Power Flow Controller ◽  
Power Oscillations ◽  
Artificial Neural ◽  
Flow Controller ◽  
Power Flow Controller

The series and shunt control scheme of unified power flow controller (UPFC) impacts the performance and stability of the power system during power swing. UPFC is the most versatile and voltage source converter device as it can control the real and reactive power of the transmission system simultaneously or selectively. When any system is subjected to any disturbance or fault, there are many challenges in damping power oscillation using conventional methods. This paper presents the neural network-based controller that replaces the proportional-integral (PI) controller to minimize the power oscillations. The performance of the artificial neural network (ANN) controller is evaluated on IEEE 9 bus system and compared with a conventional PI controller.

scholarly journals Voltage Profile Improvement with Combined UPFC and IPFC Facts Devices: A Review

2020 ◽  
Vol 1 (1) ◽  
pp. 26-30
Author(s):  
Violet Kaswii ◽  
Michael Juma Saulo
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Voltage Control ◽  
System Stability ◽  
Voltage Profile ◽  
Transmission Systems ◽  
Facts Devices ◽  
Flow Controller ◽  
Power Flow Controller

The interline power flow controller (IPFC) and the unified power flow controller (UPFC) are both advanced types of flexible AC transmission systems (FACTS). These devices can provide the power system with control of voltage, and that of real and reactive power. This paper reviews the literature on UPFC and IPFC FACTS devices in voltage control and covers two main areas of research (i) voltage control using FACTS devices, and (ii) UPFCs / IPFCs and their applications in power systems. FACTs devices are applied in modern power system networks for the purpose of voltage control while at the same time providing enhanced power system stability. Research has shown that their benefits in the long run outweighs their high cost especially when they are optimally sized and located in the power network. Moreover, in the planning of power transmission systems, a Multi-Criteria Decision Making (MCDM) technique can help in the incorporation of both the costs and technical viability. This approach provides techno-economic optimization and at the same time meeting environmental criteria.

scholarly journals Voltage Stability Improvement with finest position of UPFC using GA &PSO

2021 ◽  
Vol 7 (03) ◽  
pp. 280-285
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Voltage Stability ◽  
Reactive Power ◽  
Fitness Function ◽  
Electrical Power ◽  
Stability Index ◽  
Unified Power Flow Controller ◽  
Facts Devices

Power system is a largely inter connected network, due to this interconnection some of the lines may get over loaded and voltage collapse will occur , hence these lines are called weak lines, this causes serious voltage instability at the particular lines of the power system. The improvement of stability will achieve by controlling the reactive power flow. The Flexible Alternating Current Transmission Systems (FACTS) devices have been proposed to effectively controlling the power flow in the lines and to regulate the bus voltages in electrical power systems, resulting in an increased power transfer capability, low system losses and improved stability. In FACTS devices the Unified Power Flow Controller (UPFC) is one of the most promising device for power flow control. It can either simultaneously or selectively control both real and reactive flow and bus voltage. UPFC is a combination of shunt and series compensating devices. Optimal location of UPFC is determined based on Voltage Stability Index (VSI). GA and PSO techniques are used to set the parameters of UPFC [6]. The objective function formulated here is fitness function, which has to be maximized for net saving. The results obtained using PSO on IEEE 14 Bus is compared with that of results obtained using GA, to show the validity of the proposed techniques and for comparison purposes

scholarly journals A Comparative Study of the UPFC System by Simulation with PI-D and (NEWELM and NIMC) Controllers Based on the Adaptive Control for the Compensation of Power

2020 ◽  
Vol 11 ◽  
pp. 22-32
Author(s):  
Bouanane Abdelkrim ◽  
Yahiaoui Merzoug ◽  
Benyahia Khaled ◽  
Chaker Abdelkader
Keyword(s):  
Adaptive Control ◽  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Fast Response ◽  
Test System ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Model Control ◽  
Elman Recurrent Neural Network

-Flexible Alternating Current Transmission System devices (FACTS) are power electronic components. Their fast response offers potential benefits for power system stability enhancement and allows utilities to operate their transmission systems even closer to their physical limitations, more efficiently, with improved reliability, greater stability and security than traditional mechanical switching technology. The unified Power Flow Controller (UPFC) is the most comprehensive multivariable device among the FACTS controllers. According to high importance of power flow control in transmission lines, new controllers are designed based on the Elman Recurrent Neural Network (NEWELM) and Neural Inverse Model Control (NIMC) with adaptive control. The Main purpose of this paper is to design a controller which enables a power system to track reference signals precisely and to be robust in the presence of uncertainty of system parameters and disturbances. The performances of the proposed controllers (NEWELM and NIMC) are based neural adaptive control and simulated on a two bus test system and compared with a conventional PI controller with decoupling (PI-D). The studies are performed based on well known software package MATLAB/Simulink tool box.

scholarly journals Study Impact of Unified Power Flow Controller (UPFC) on a Transmission Line Performance under Different Loading Conditions

2020 ◽  
Vol 26 (2) ◽  
pp. 176-192
Author(s):  
Sana K. Abd al hassan ◽  
Firas Mohammed Tuaimah
Keyword(s):  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Reactive Power ◽  
Test System ◽  
Unified Power Flow Controller ◽  
Loading Conditions ◽  
Flow Controller ◽  
Matlab Programming ◽  
Power Flow Controller

Now-a-days the Flexible AC Transmission Systems (FACTS) technology is very effective in improving the power flow along the transmission lines and makes the power system more flexible and controllable. This paper deals with the most robust type of FACTS devices; it’s a Unified Power Flow Controller (UPFC). Many cases have been taken to study how the system behaves in the presence and absence of the UPFC under normal and contingency conditions. The UPFC is a device that can be used to improve the bus voltage, increasing the loadability of the line and reduce the active and reactive power losses in the transmission lines, through controlling the flow of real and reactive power. Both the magnitude and the phase angle of the voltage can be varied independently. The steady state model of UPFC has been adopted on IEEE-30 bus test system and simulated using MATLAB programming language. Newton Raphson (NR) numerical analysis method has been used for solving the load flow of the system. The practical part has been solved through Power System Simulation for Engineers (PSS\E) software Version 32.0. The Comparative results between the experimental and practical parts obtained from adopting the UPFC where too close and almost the same under different loading conditions, which are (5%, 10%, 15% and 20%) of the total load.

scholarly journals Robust stability power in the transmission line with the use of a UPFC system and neural controllers based adaptive control

2019 ◽  
Vol 10 (3) ◽  
pp. 1281
Author(s):  
Bouanane Abdelkrim ◽  
Yahiaoui Merzoug
Keyword(s):  
Adaptive Control ◽  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Fast Response ◽  
Test System ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Model Control ◽  
Elman Recurrent Neural Network

The main purpose of this paper is to design a regulator which enables a power system to track reference signals precisely and to be robust in the presence of uncertainty of system parameters and disturbances. The performances of the proposed controllers (NEWELM and NIMC) are based neural adaptive control and simulated on a two-bus test system and compared with a conventional PI controller with decoupling (PI-D). The studies are performed based on well known software package MATLAB/Simulink tool box. Flexible Alternating Current Transmission System devices (FACTS) are power electronic components. Their fast response offers potential benefits for power system stability enhancement and allows utilities to operate their transmission systems even closer to their physical limitations, more efficiently, with improved reliability, greater stability and security than traditional mechanical switching technology. The most used component of FACTS systems is the Unified Power Flow Controller (UPFC). According to high importance of power flow control in transmission lines, new controllers are designed based on the Elman Recurrent Neural Network (NEWELM) and Neural Inverse Model Control (NIMC) with adaptive control.

Application of UPFC for enhancement of voltage profile and minimization of losses using Fast Voltage Stability Index (FVSI)

2012 ◽  
Vol 61 (2) ◽  
pp. 239-250 ◽  
Author(s):  
M. Kumar ◽  
P. Renuga
Keyword(s):  
Power System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Technique ◽  
Optimal Solution ◽  
Stability Index ◽  
Test System ◽  
Unified Power Flow Controller ◽  
Voltage Profile ◽  
Voltage Stability Index

Application of UPFC for enhancement of voltage profile and minimization of losses using Fast Voltage Stability Index (FVSI)Transmission line loss minimization in a power system is an important research issue and it can be achieved by means of reactive power compensation. The unscheduled increment of load in a power system has driven the system to experience stressed conditions. This phenomenon has also led to voltage profile depreciation below the acceptable secure limit. The significance and use of Flexible AC Transmission System (FACTS) devices and capacitor placement is in order to alleviate the voltage profile decay problem. The optimal value of compensating devices requires proper optimization technique, able to search the optimal solution with less computational burden. This paper presents a technique to provide simultaneous or individual controls of basic system parameter like transmission voltage, impedance and phase angle, thereby controlling the transmitted power using Unified Power Flow Controller (UPFC) based on Bacterial Foraging (BF) algorithm. Voltage stability level of the system is defined on the Fast Voltage Stability Index (FVSI) of the lines. The IEEE 14-bus system is used as the test system to demonstrate the applicability and efficiency of the proposed system. The test result showed that the location of UPFC improves the voltage profile and also minimize the real power loss.

Sign in / Sign up

Export Citation Format

Share Document