scholarly journals The Compressive Strength of Light Weight Concrete

2020 ◽  
Vol 12 (4) ◽  
Author(s):  
J.E.O. Ovri ◽  
E.O. Okereke
Keyword(s):  
Compressive Strength ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Light Weight ◽  
Palm Kernel Shell ◽  
Light Weight Concrete ◽  
Periwinkle Shell

The compressive strength of lightweight concrete using palm kernel shell (pks) and periwinkle shell (pws) is reported. The strength as a function of aggregates ,age, and density were investigated. The strengths were measured at interval of 7-day for 28 days. The strengths obtained were in the range of those reported in the standards for lightweight concretes. The densities were also observed to increase with age and fall within the range of those reported in the literature. The results for the compressive strength showed that the strength increases with age for both aggregates.

scholarly journals Investigating the Performance of Palm Kernel Shells and Periwinkle Shells as Coarse Aggregates in Concrete

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
O.J Oladiran ◽  
D.R Simeon ◽  
O.A Olatunde
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Specific Area ◽  
Light Weight ◽  
Palm Kernel Shell ◽  
Coarse Aggregates ◽  
Palm Kernel Shells ◽  
Periwinkle Shell

Excessive usage of materials is causing fast depletion of natural stone deposit. This study therefore investigates the performance of palm kernel shells (PKS) and periwinkle shells (PS) as alternatives coarse aggregates in concrete. Forty cubes and 40 cylinders each were produced with PKS and PS as replacement materials for granite. Series of tests were conducted to determine their performances. The results showed that, compressive and tensile strengths decrease as PKS and PS content increases, which allow specific area to increase, thus requiring more cement paste to bond effectively with the shells. The result also revealed that for all curing ages, palm kernel shell concrete (PKSC) have lower compressive strength and tensile strength than periwinkle shell concrete (PSC). The compressive strength and tensile strength of the 28-day PKSC with 100% replacement were 4.33 N/mm2 and 3.68 N/mm2 respectively; that of PSC at 100% replacement were 5.89 N/mm2 and 4.95 N/mm2 respectively; and granite concrete without any replacement were 25.11 N/mm2 and 11.74 N/mm2 respectively. It is concluded that both PKSC and PSC satisfied the compressive strength and tensile strength requirement of light weight concrete, although PS has better gradation and bonding to cement than PKS. This implies that PS is best suited as replacement for granite in lightweight concrete than PKS. It is recommended that the mix-ratio should be altered to get higher values of compressive strength; and both PKS and PS should be used for lightweight concretes.

Oil Palm Clinker Potentility for Producing Lightweight Concrete: Compressive Strength, Tensile and Modulus of Elasticity Analysis

2016 ◽  
Vol 841 ◽  
pp. 200-209 ◽  
Author(s):  
Rezuwan Kamaruddin ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Muhammad Faheem Mohd Tahir ◽  
Januarti Jaya Ekaputri
Keyword(s):  
Compressive Strength ◽  
Oil Palm ◽  
Modulus Of Elasticity ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Inert Material ◽  
Fibrous Materials ◽  
Boiler Furnace ◽  
Conventional Concrete ◽  
Palm Kernel Shell

Oil palm clinker is formed by burning of oil palm kernel shell and fibrous materials in boiler furnace. The clinker is no longer a bio-material that has changed to inert material likes the crushed brick. Large quantities oil palm clinkers have become a waste and caused disposal problem. It requires extra costs for handling, transportation and finding out suitable the dumping site. Research has been conducted to explore the potentiality usage of oil palm clinker as fine and coarse lightweight aggregates at Universiti Pertanian Malaysia. Mixtures of oil palm clinker concretes were designed, prepared and tested. Mechanical properties of a good mixture of tensile strength, compressive strength, modulus of elasticity, creep and shrinkage were satisfied the standard engineering codes of practices. Oil palm clicker concrete was found lighter than conventional concrete, which usually weighs between 2240 and 2400 kg m-3. The means of compressive and tensile strengths were found 30.79 and 3.34 N mm-2 respectively. In addition, the mean of modulus of elasticity was 13.024 kNmm-2. Therefore, oil palm clinker aggregate and concrete are recommended to be used in lightweight reinforced concrete structures.

scholarly journals Prediction of optimum compressive strength of light-weight concrete containing Nigerian palm kernel shells

2020 ◽  
Vol 32 (5) ◽  
pp. 303-309
Author(s):  
Damilola O. Oyejobi ◽  
Mohammed Jameel ◽  
N.H.R. Sulong ◽  
Sabur A. Raji ◽  
H. Adebayo Ibrahim
Keyword(s):  
Compressive Strength ◽  
Palm Kernel ◽  
Light Weight ◽  
Light Weight Concrete ◽  
Palm Kernel Shells

Effects of Loading Percentage of Polyurethane in Lightweight Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1082-1085 ◽  
Author(s):  
Kamarul Aini Mohd Sari ◽  
Sohif Mat ◽  
Khairiah Haji Badri ◽  
Muhammad Fauzi Mohd Zain
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Physical And Mechanical Properties ◽  
Concrete Mixture ◽  
Experimental Program ◽  
Polymer Concrete ◽  
Optimum Level ◽  
Methylene Diphenyl Diisocyanate

An experimental program was performed to obtain the density, compressive strength, and thermal conductivity of palm-based lightweight concrete. Palm-based polyurethane (PU) particles were used as lightweight aggregates in creating concrete systems. Concrete systems contain palm kernel oil-based polyol (PKO-p) reacted with 2,4-methylene diphenyl diisocyanate (MDI). In this study, polymer concrete was improved to achieve the optimum level of PU with the lowest possible density. The PU particles in the concrete mixture comprised of 1% to 5% w/w with density of less than 1800 kg/m3. The PU particles were 5 mm in size. The ratio of PKO-p to MDI was set at 1:1 and the loading of the concrete mixture was set at 3% w/w to produce lightweight concrete. The resulting concrete has excellent compressive strength (17.5 MPa) and thermal conductivity (0.24 W/mK). Results show that the PU particle dosage has the most significant effect on the physical and mechanical properties of concrete.

Development of Lightweight Concrete using Industrial Waste Palm Oil Clinker

2021 ◽  
Author(s):  
Ibrahim Al-Ani ◽  
◽  
Wan Hamidon ◽  
Wan Mohtar ◽  
Basma Alwachy ◽  
...  
Keyword(s):  
Palm Oil ◽  
Oil Palm ◽  
Lightweight Concrete ◽  
Light Weight ◽  
Durability Properties ◽  
Light Weight Concrete ◽  
Water Absorption Test ◽  
Natural Aggregates ◽  
Definition Of ◽  
Strength And Durability

Concrete is a major material used in the construction of buildings and structures in the world. Gravel and sand are the major ingredients of concrete but are non-renewable natural materials. Therefore, the utilisation of palm oil clinker (POC), a solid waste generated from palm oil industry is proposed to replace natural aggregate in this research to reduce the demand for natural aggregates. One mix of ordinary concrete as control concrete; while four mix proportions of oil palm clinker concrete were obtained by replacing 25 %, 50 %, 75 %, and 100 % of gravel and sand of control concrete with coarse and fine oil palm clinker respectively by volume, with same cement content and water cement ratio. Compressive strength test was carried out of concretes with different percentages of oil palm clinker; whereas water absorption test according to respective standard, were carried out to determine the durability properties of various mixes. Based on the results obtained, the study on the effect of percentage of clinker on strength and durability properties was drawn. According to ACI classification of light weight concrete only the 100 percentage replacement can achieve the definition of light weight concrete since its density less than 1900 kg/m3 and strength larger than 17 MPa. Eventually the 25 % replacement of the normal aggregate by the OPC will improve the strength and durability of the concrete.

scholarly journals Effect of Water Cement Ratios on Compressive Strength of Palm Kernel Shell Concrete

2019 ◽  
Vol 2 (Issue 1) ◽  
Author(s):  
A.O Adeyemi ◽  
M.A Anifowose ◽  
I.O Amototo ◽  
S.A Adebara ◽  
M.Y Olawuyi
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
Palm Kernel ◽  
Hardened Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Palm Kernel Shell ◽  
Compressive Strength Of Concrete ◽  
Palm Kernel Shells

This study examined the effect of varying water cement ratio on the compressive strength of concrete produced using palm kernel shell (PKS) as coarse aggregate at different replacement levels. The replacement levels of coarse aggregate with palm kernel shells (PKS) were 0%, 25%, 50%, and 100% respectively. PKS concrete cubes (144 specimens) of sizes 150mm x 150mm x 150mm were cast and cured in water for 7, 14, 21 and 28 days respectively. A mix ratio of 1:2:4 was adopted with water-cement ratio of 0.45, 0.5, and 0.6 respectively while the batching was done by weight. Slump test was conducted on fresh concrete while compressive strength test was carried out on the hardened concrete cubes using a compression testing machine of 2000kN capacity. The result of tests on fresh concrete shows that the slump height of 0.45 water cement ratio (w/c) increases with an increase in PKS%. This trend was similar to 0.50 and 0.60 w/c. However, the compressive strength of concrete cube decreases with an increase in w/c (from 0.45 to 0.60) but increases with respect to curing age and also decreases with increase in PKS%. Concrete with 0.45 water-cement ratio possess the highest compressive strength. It was observed that PKS is not a good substitute for coarse aggregate in mix ratio 1:2:4 for concrete productions. Hence, the study suggest the use of chemical admixture such as superplasticizer or calcium chloride in order to improve the strength of palm kernel shells-concrete.

scholarly journals Assessment of Workability and Compressive Strength of Rice Husk Ash-Blended Palm Kernel Shell Concrete

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
K. O. Oriola
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Construction Materials ◽  
Palm Kernel ◽  
Lightweight Aggregate ◽  
Strength Properties ◽  
Lightweight Aggregate Concrete ◽  
Palm Kernel Shell ◽  
Compressive Strength Of Concrete

The evaluation of agro-industrial by-products as alternative construction materials is becoming more significant as the demand for environmentally friendly construction materials increases. In this study, the workability and compressive strength of concrete produced by combining Palm Kernel Shell (PKS) and Rice Husk Ash (RHA) was investigated. Concrete mixes using a fixed content of 15% RHA as replacement for cement and 20, 40, 60, 80 and 100% PKS as replacement for crushed granite by volume with the mix ratios of 1:1½:3, 1:2:4 and 1:3:6 were produced. The water-to-cement ratios of 0.5, 0.6 and 0.7 were used for the respective mix ratios. Concrete without PKS and RHA served as control mix. The fresh concrete workability was evaluated through slump test. The concrete hardened properties determined were the density and compressive strength. The results indicated that the workability and density of PKSC were lower than control concrete, and they decreased as the PKS content in each mix ratio was increased. The compressive strength of concrete at 90 days decreased from 27.8-13.1 N/mm2, 23.8-8.9 N/mm2and 20.6-7.6 for 1:1½:3, 1:2:4 and 1:3:6, respectively as the substitution level of PKS increased from 0-100%. However, the compressive strength of concrete increased with curing age and the gain in strength of concrete containing RHA and PKSC were higher than the control at the later age. The concrete containing 15% RHA with up to 40% PKS for 1:1½:3 and 20% PKS for 1:2:4 mix ratios satisfied the minimum strength requirements for structural lightweight aggregate concrete (SLWAC) stipulated by the relevant standards. It can be concluded that the addition of 15% RHA is effective in improving the strength properties of PKSC for eco-friendly SLWAC production..

scholarly journals An appropriate relationship between flexural strength and compressive strength of palm kernel shell concrete

2016 ◽  
Vol 55 (2) ◽  
pp. 1553-1562 ◽  
Author(s):  
Ibrahim Tunde Yusuf ◽  
Yinusa Alaro Jimoh ◽  
Wahab Adebayo Salami
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Palm Kernel ◽  
Palm Kernel Shell
Sign in / Sign up

Export Citation Format

Share Document