Inductor Saturation Compensation in Three-Phase Three-Wire Voltage-Source Converters via Inverse System Dynamics-I

Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava

In three-phase three-wire (3P3W) voltage-source converter (VSC) systems, utilization of filter inductors with deep saturation characteristics is often advantageous due to the improved size, cost, and efficiency. However, with the use of conventional synchronous frame current control (CSCC) methods, the inductor saturation results in significant dynamic performance loss and poor steady-state current waveform quality. This paper proposes an inverse dynamic model based compensation (IDMBC) method to overcome these performance issues. Accordingly, a review of inductor saturation and core materials is performed, and the motivation on the use of saturable inductors is clarified. Then, two-phase exact modelling of the 3P3W VSC control system is obtained and the drawbacks of CSCC have been demonstrated analytically. Based on the exact modelling, the inverse system dynamic model of the nonlinear system is obtained and employed such that the nonlinear plant is converted to a fictitious linear inductor system for linear current regulators to perform satisfactorily.


2020 ◽  
Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava

In three-phase three-wire (3P3W) voltage-source converter (VSC) systems, utilization of filter inductors with deep saturation characteristics is often advantageous due to the improved size, cost, and efficiency. However, with the use of conventional synchronous frame current control (CSCC) methods, the inductor saturation results in significant dynamic performance loss and poor steady-state current waveform quality. This paper proposes an inverse dynamic model based compensation (IDMBC) method to overcome these performance issues. Accordingly, a review of inductor saturation and core materials is performed, and the motivation on the use of saturable inductors is clarified. Then, two-phase exact modelling of the 3P3W VSC control system is obtained and the drawbacks of CSCC have been demonstrated analytically. Based on the exact modelling, the inverse system dynamic model of the nonlinear system is obtained and employed such that the nonlinear plant is converted to a fictitious linear inductor system for linear current regulators to perform satisfactorily.



2020 ◽  
Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava

Current waveform quality and current control bandwidth are the figures of merit for current controllers in three-phase three-wire (3P3W) voltage-source converter (VSC) systems. When saturable inductors are employed as converter side inductors due to cost, size, and energy conversion efficiency benefits in 3P3W VSCs with conventional synchronous frame current control (CSCC); substantial drawbacks arise by means of these figures of merit. In the preceding part of this study, an inverse dynamic model based compensation (IDMBC) method has been proposed to deal with these drawbacks. Complementarily, this paper presents a thorough analytical investigation of the control system characteristics of CSCC and IDMBC methods that affect the current waveform quality and current control bandwidth. The analyses are verified via dynamic response and waveform quality simulations and experiments that employ saturable inductors reaching $1/9^{th}$ of the zero-current inductance at full current. The results obtained demonstrate the suitability of the IDMBC method for 3P3W VSCs employing saturable inductors.



2020 ◽  
Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava

Current waveform quality and current control bandwidth are the figures of merit for current controllers in three-phase three-wire (3P3W) voltage-source converter (VSC) systems. When saturable inductors are employed as converter side inductors due to cost, size, and energy conversion efficiency benefits in 3P3W VSCs with conventional synchronous frame current control (CSCC); substantial drawbacks arise by means of these figures of merit. In the preceding part of this study, an inverse dynamic model based compensation (IDMBC) method has been proposed to deal with these drawbacks. Complementarily, this paper presents a thorough analytical investigation of the control system characteristics of CSCC and IDMBC methods that affect the current waveform quality and current control bandwidth. The analyses are verified via dynamic response and waveform quality simulations and experiments that employ saturable inductors reaching $1/9^{th}$ of the zero-current inductance at full current. The results obtained demonstrate the suitability of the IDMBC method for 3P3W VSCs employing saturable inductors.



2014 ◽  
Vol 2 (1) ◽  
pp. 16-22 ◽  
Author(s):  
Wenming Gong ◽  
Shuju Hu ◽  
Martin Shan ◽  
Honghua Xu


ENERGYO ◽  
2018 ◽  
Author(s):  
Wenming Gong ◽  
Shuju Hu ◽  
Martin Shan ◽  
Honghua Xu


2012 ◽  
Vol 433-440 ◽  
pp. 7281-7286
Author(s):  
Xiao Chen Wang ◽  
Jiang Ming Yang ◽  
Hong Mei Li ◽  
Feng Xiang Sun

Three phase voltage source PWM rectifier (VSR)’s indirect current control (ICC) strategy has good static performance, simple control steps and low cost. But bad dynamic performance is its inherent drawback. If this weakness is overcome, it is still valued. In this article normal ICC is deeply studied beginning with its mathematical model under synchronous rotating coordinate. It is indicated that its bad dynamic performance originates from bad current response. So an improving scheme adding compensation in series is brought out. Additionally a differential negative feedback loop of DC output voltage is added to limit the voltage overshoot. Lastly the control system’s computer simulation model is established by MATLAB and the simulating results prove that improved ICC makes great process in dynamic performance and has advantages of both indirect and direct current control (DCC).





Sign in / Sign up

Export Citation Format

Share Document