scholarly journals Analisis Produktivitas, Keuntungan, dan Efisiensi Biaya Usaha Budidaya Lebah Madu Trigona sp. di Kecamatan Landono Kabupaten Konawe Selatan

2020 ◽  
Vol 5 (3) ◽  
pp. 111
Author(s):  
Ni Putu Arin Pratiwi ◽  
Bahari Abdullah ◽  
Muhammad Arief Dirgantoro
Keyword(s):  
Honey Bee ◽  
Cost Efficiency ◽  
Efficiency Analysis ◽  
Productivity Analysis ◽  
Average Value ◽  
Average Ratio ◽  
Bee Colony ◽  
Profit Analysis ◽  
Quantitative Descriptive ◽  
The Cost

This study aims to determine the productivity of Trigona sp beekeeping, know the benefits of Trigona sp beekeeping and find out the cost efficiency of Trigona sp beekeeping in Landono Subdistrict, Konawe Selatan Regency. This research was conducted in November 2019 to March 2020 using quantitative descriptive methods. Analysis of the data used in this research is productivity analysis, profit analysis, and cost efficiency analysis using the RC ratio. The results obtained, the average value of honey bee productivity in each bee colony produces 1.02 kg of honey, the average profit of Trigona sp beekeeping is Rp5,068,900, - and RC The average ratio of Trigona sp beekeeping is 3.01. RC ratio value> 1 which indicates that the Trigona sp honey beekeeping business is profitable and can be continued. Based on this research it is expected that the Trigona sp bee business can be better known and developed more broadly.

Ranking units and determining dominance relations in the cost efficiency analysis

2015 ◽  
Vol 49 (5) ◽  
pp. 879-896 ◽  
Author(s):  
Roza Azizi ◽  
Reza Kazemi Matin ◽  
Reza Farzipoor Saen
Keyword(s):  
Cost Efficiency ◽  
Efficiency Analysis ◽  
Dominance Relations ◽  
The Cost

scholarly journals Cost-efficiency analysis of a runoff detention reservoir with integrated hydraulic and structural dimensioning

RBRH ◽  
2018 ◽  
Vol 23 (0) ◽  
Author(s):  
Victor Santos Galvão Baptista ◽  
Adriano Rolim da Paz
Keyword(s):  
Cost Efficiency ◽  
Control Level ◽  
Concrete Structures ◽  
Drainage System ◽  
Efficiency Analysis ◽  
Integrated Analysis ◽  
Technical Standards ◽  
The Cost ◽  
Economic Criteria

ABSTRACT In Brazil, urbanization-dominated imperviousness is prevalent, increasing the incidence and magnitude of floods. An alternative to control this impact is an on-site runoff detention reservoir. The choice of reservoir adopted should ideally combine hydraulic/hydrological and structural/economic criteria, although there is a gap in the literature regarding this type of integrated analysis. In this article, a cost-efficiency analysis is conducted to select a reservoir to control the runoff captured by a roof (4,657 m2) using the Puls method for hydraulic dimensioning and based on technical standards for the design of concrete structures. The results indicate that a decrease of approximately 3% in the theoretically ideal efficiency (100%) of the reservoir provided a 36% drop in cost. Such an alternative is more likely to become attractive and economically viable, with virtually the same benefits to the downstream stormwater drainage system. The analysis of different alternatives induced a decision between the level of control of the reservoir output and the cost that emphasized different aspects, focusing on more than the minimization of the cost or the imposition of a pre-defined control level in an arbitrary way.

scholarly journals A Cost Efficiency Analysis and Mechanism for Dynamic Partially Reconfigurable Computing Systems

2021 ◽  
Author(s):  
David Diaz
Keyword(s):  
Reconfigurable Computing ◽  
Cost Efficiency ◽  
Experimental Tests ◽  
Efficiency Analysis ◽  
Efficiency Factor ◽  
Design Stage ◽  
Computing Systems ◽  
Computing Architecture ◽  
Development Costs ◽  
The Cost

Dynamic Partially Reconfigurable Computing Systems have proven to be useful in environments where a multiplicity of tasks is required. These systems used Dynamic Virtual Components (DVCs) for reconfiguration. However, the computing architecture (dedicated, software, hybrid) of the DVC must be selected during the design stage. In this thesis, a mechanism in which we evaluate and analyze the cost efficiency of a DVC based on a cost efficiency factor (CEF) is proposed. Data centric and stream centric experimental tests were performed and the CEF of a 3D stereo-panoramic augmented reality hybrid DVC was de termined. The results show that development costs and number of units to be produced influence the cost efficiency of a DVC. From the results it is concluded that the CEF can be a useful tool for selecting the computing architecture of a DVC, particularly when only a few units are to be deployed.

scholarly journals The Cost Efficiency Analysis of JeollaNamdo Food Industry

2015 ◽  
Vol 43 (4) ◽  
pp. 533-544
Author(s):  
Cheng Lin Qing ◽  
JuMong Na ◽  
Seog Ju Chang ◽  
Chang Uk Im
Keyword(s):  
Cost Efficiency ◽  
Food Industry ◽  
Efficiency Analysis ◽  
The Cost

scholarly journals A Cost Efficiency Analysis and Mechanism for Dynamic Partially Reconfigurable Computing Systems

2021 ◽  
Author(s):  
David Diaz
Keyword(s):  
Reconfigurable Computing ◽  
Cost Efficiency ◽  
Experimental Tests ◽  
Efficiency Analysis ◽  
Efficiency Factor ◽  
Design Stage ◽  
Computing Systems ◽  
Computing Architecture ◽  
Development Costs ◽  
The Cost

Dynamic Partially Reconfigurable Computing Systems have proven to be useful in environments where a multiplicity of tasks is required. These systems used Dynamic Virtual Components (DVCs) for reconfiguration. However, the computing architecture (dedicated, software, hybrid) of the DVC must be selected during the design stage. In this thesis, a mechanism in which we evaluate and analyze the cost efficiency of a DVC based on a cost efficiency factor (CEF) is proposed. Data centric and stream centric experimental tests were performed and the CEF of a 3D stereo-panoramic augmented reality hybrid DVC was de termined. The results show that development costs and number of units to be produced influence the cost efficiency of a DVC. From the results it is concluded that the CEF can be a useful tool for selecting the computing architecture of a DVC, particularly when only a few units are to be deployed.

scholarly journals Effect of Initial Strength of Honey Bee Colonies (Apis mellifera) Supered in Different Ways on Maximizing Honey Production in Nepal

2012 ◽  
Vol 56 (2) ◽  
pp. 71-81 ◽  
Author(s):  
Khem Raj Neupane ◽  
Jerzy Woyke ◽  
Jerzy Wilde
Keyword(s):  
Apis Mellifera ◽  
Honey Bee ◽  
Initial Strength ◽  
Honey Production ◽  
Colony Management ◽  
Bee Colony ◽  
Worker Brood ◽  
Highly Correlated ◽  
The Cost ◽  
Bee Colonies

Abstract A study was carried out to investigate the effect of the original strengths of honey bee colonies supered in different ways, on the production of honey by Apis mellifera bees in the Terai region of Nepal. Bee colonies of three different original strengths, in which the bees covered 5, 10 and 20 combs, were supered in three different methods. The results showed that honey production was highly correlated to the number of worker brood cells in the colonies (r = 0.96, p = 0.003). Colonies of 5 comb initial strength (CIS), as farmers’ practices in Nepal, produced the lowest amount of honey (30.1 kg per annum). Bees in colonies of 10 CIS with a deep super, produced twice as much honey (62.2 kg), and colonies of 20 CIS with deep supers produced even significantly more honey (74.5 kg). However, the relationship between the financial values of the produced honey to the cost of its production was the highest - 1.52 : 1 for colonies of 10 CIS with a deep super. Therefore, this bee colony management is recommended to the beekeepers in the Terai region and lower hills of Nepal. This fi nding has global application.

Advances in Cost Frontier Analysis of the Firm

2013 ◽  
pp. 65-88
Author(s):  
C.A. Knox Lovell ◽  
Emili Grifell-Tatjé
Keyword(s):  
Cost Efficiency ◽  
Efficiency Analysis ◽  
Productivity Change ◽  
Frontier Analysis ◽  
Cost Frontier ◽  
Cost Variance ◽  
Standard Cost ◽  
New Directions ◽  
The Cost ◽  
Analytical Frameworks

We study various analytical frameworks relating productivity change to change in the cost structure and cost efficiency of the firm. We begin by motivating a focus on the cost side, and not the revenue side, of the profit objective of the firm. We continue by relating the cost accounting tool of standard cost variance analysis to the economics tool of cost efficiency analysis. We focus on managerially controllable drivers of cost efficiency, including productivity change and its components. We conclude by noting some significant empirical applications of the analysis, by recommending cost efficiency analysis as a valuable tool for benchmarking against the best, and by suggesting some new directions for research.

Sign in / Sign up

Export Citation Format

Share Document