Double Layer Socket Preservation Technique Associated with Xenogenous Bone Graft and Polypropylene Membrane: A Case Report

2021 ◽  
Author(s):  
Bruno Santana Freitas
Keyword(s):  
Case Report ◽  
Double Layer ◽  
Good Health ◽  
Collagen Membrane ◽  
Type Iii Collagen ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Socket Preservation ◽  
Study Results ◽  
Preservation Technique

With the demand for tooth/gum aesthetics in implant-supported rehabilitations, the surgeon, whether an implant specialist or not, increasingly needs to be mindful of proper care for socket preservation following extraction. The paper presented here reports the case of a male patient who manifested dental impairment of the Upper Left First Molar (tooth #26) [in FDI notation]; following tomographic analysis and after reaching a consensus with the patient, the decision was made to extract said tooth and preserve the socket for subsequent implant placement. The aim of the case report is to present a clinical case of alveolar ridge preservation through the “Double Layer Socket Preservation” technique, a technique created by Barry Barthee, whereby a xenogenous graft under an xenogenous type III collagen membrane was combined with a polypropylene barrier. Following research and study results on the subject, it was concluded that by applying this technique, the alveolar ridge is greatly preserved and bone volume is maintained, both of which are very important factors for good health of the tissues surrounding the implant and consequent increase in the survival of the implant itself.

scholarly journals Double Layer Socket Preservation Technique Associated with Xenogenous Bone Graft and Polypropylene Membrane: A Case Report

2022 ◽  
pp. 134-139
Author(s):  
Bruno Santana Freitas ◽  
Felipe Andres Ortiz Poblete ◽  
Sergio Charifker Ribeiro Martins ◽  
Leandro Lécio de Lima Sousa ◽  
Andre Hamar Braga ◽  
...  
Keyword(s):  
Case Report ◽  
Bone Graft ◽  
Double Layer ◽  
Socket Preservation ◽  
Polypropylene Membrane ◽  
Preservation Technique

scholarly journals A retrospective cohort study of how alveolar ridge preservation affects the need of alveolar ridge augmentation at posterior tooth implant sites

2021 ◽  
Author(s):  
Kai-Fang Hu ◽  
Ying-Chu Lin ◽  
Yu-Ting Huang ◽  
Yu-Hsiang Chou
Keyword(s):  
Treatment Modality ◽  
Alveolar Bone ◽  
Dental Treatment ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Ridge Augmentation ◽  
Posterior Tooth ◽  
Alveolar Ridge Preservation ◽  
Study Results ◽  
Treatment Plans

Abstract Objectives The aim of this study was to assess whether alveolar ridge preservation (ARP) can reduce the need of ridge augmentation at posterior tooth sites. Material and methods This study enrolled patients who received dental implants at posterior tooth sites during 2013–2019. Demographic data and dental treatment histories were collected. Based on healing patterns after tooth extraction, patients were divided into ARP and spontaneous healing (SH) groups. Three surgical treatment plans were devised according to the alveolar bone volume on cone-beam computed tomography (CBCT). The three treatment plans were to perform implant alone, simultaneous guided bone regeneration (GBR) and implantation, and staged GBR before implantation. Statistical analyses were performed to determine relationships. Results There were 92 implant records in the ARP group and 249 implant records in the SH group. A significant intergroup difference was observed regarding the frequency distribution of the treatment modality of staged GBR before implant (χ2 = 15.07, p = 0.0005). Based on the implant alone treatment modality and simple logistic regression, the SH pattern was related to staged GBR before implant (SH vs. ARP: crude odds ratio (OR) = 4.65, 95% confidence interval (CI) = 2.15–11.61, p = 0.0003). After adjusting confounding factors, the risk was still significant (adjusted OR = 5.02, 95% CI = 2.26–12.85, p = 0.0002). Conclusions The study results suggested that ARP is more likely to lead to the treatment modality of implant alone and reduce the need for staged GBR before implantation. Clinical relevance This study describes ARP capable of minimizing the need for staged GBR before implantation and shortening the treatment duration.

scholarly journals Biphasic Calcium Phosphate Sphere Graft Combined with a Double-Layer Non-Crosslinked Collagen Membrane Technique for Ridge Preservation: A Randomized Controlled Animal Study

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 18 ◽  
Author(s):  
Jungwon Lee ◽  
Young-Jun Lim ◽  
Bongju Kim ◽  
Ki-Tae Koo ◽  
Yong-Moo Lee
Keyword(s):  
Bone Graft ◽  
Double Layer ◽  
Single Layer ◽  
Test Group ◽  
Control Group ◽  
Collagen Membrane ◽  
Ridge Preservation ◽  
Graft Material ◽  
Membrane Technique ◽  
Layer Membrane

The purpose of this study was to compare the histologic and radiologic differences between single- and double-layer collagen membrane techniques in flapless ridge preservation. The mandibular fourth premolar and first molar of four beagle dogs were used in the experiment. Mesial roots of the teeth were extracted and root canal treatment was performed at the distal roots. Ridge preservation was performed at the extraction sites using synthetic bone graft material. A single layer (control group) or double layer (test group) of non-crosslinked collagen membrane was applied following bone graft application. Three months later, the animals were sacrificed and micro-computed tomography (micro-CT) and histomorphometric analyses were conducted. Nonparametric Mann–Whitney test was performed to compare between the control and test groups. The vertical difference between buccal and lingual crests of control and test groups was 1.28 ± 0.41 and 0.53 ± 0.37 mm, respectively (p = 0.026). The mineralized bone area in control and test groups was 31.48% ± 7.41% and 42.25% ± 9.73%, respectively (p = 0.041). Within the limit of this study, ridge preservation using the double-layer membrane technique showed a reduced buccal bone resorption and improved new-bone formation in the ridge compared to that using the single-layer membrane technique.

Bilateral Vertical Ridge Augmentation With Block Grafts and Guided Bone Regeneration in the Posterior Mandible: A Case Report

2012 ◽  
Vol 38 (S1) ◽  
pp. 533-537 ◽  
Author(s):  
Maria A. Peñarrocha ◽  
Jose A. Vina ◽  
Laura Maestre ◽  
David Peñarrocha-Oltra
Keyword(s):  
Case Report ◽  
Bone Regeneration ◽  
Mandibular Canal ◽  
Guided Bone Regeneration ◽  
Autogenous Bone ◽  
Collagen Membrane ◽  
Bone Block ◽  
Alveolar Ridge ◽  
Ridge Augmentation ◽  
Implant Loading

The aim is to describe bilateral vertical ridge augmentation with intraoral block grafts and guided bone regeneration in the posterior mandible in preparation for implant placement. A 61-year-old woman, edentulous in the posterior mandible, presented for implant rehabilitation. The radiographic study showed 3 to 6 mm of bone height from the ridge to the mandibular canal. Autogenous bone block grafts from the chin and the mandibular ramus, harvested with ultrasonics, were used to augment the alveolar ridge. To reduce resorption, the grafts were covered with particulate alloplastic material and a collagen membrane. Delayed implants were placed 6 months after vertical augmentation, and 3 months later implants were loaded with a fixed prosthesis. A temporary sensory complication occurred, but 12 months after implant loading, there were no failures. In this case report block bone grafting was a feasible option to vertically augment the alveolar ridge in the posterior mandible.

Alveolar Ridge Preservation With Deproteinized Bovine Bone Graft and Collagen Membrane and Delayed Implants

2014 ◽  
Vol 25 (5) ◽  
pp. 1698-1702 ◽  
Author(s):  
Chaoyuan Pang ◽  
Yuxiang Ding ◽  
Hongzhi Zhou ◽  
Ruifeng Qin ◽  
Rui Hou ◽  
...  
Keyword(s):  
Bone Graft ◽  
Collagen Membrane ◽  
Ridge Preservation ◽  
Bovine Bone ◽  
Alveolar Ridge ◽  
Alveolar Ridge Preservation ◽  
Deproteinized Bovine Bone

scholarly journals Associations among Primary Stability, Histomorphometric Findings, and Bone Density: A Prospective Randomized Study after Alveolar Ridge Preservation with a Collagen Cone

2020 ◽  
Vol 8 (4) ◽  
pp. 112
Author(s):  
Sigmar Schnutenhaus ◽  
Werner Götz ◽  
Jens Dreyhaupt ◽  
Heike Rudolph ◽  
Ralph G. Luthardt ◽  
...  
Keyword(s):  
Bone Density ◽  
Tooth Extraction ◽  
Randomized Study ◽  
Primary Stability ◽  
Collagen Membrane ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Implant Placement ◽  
Randomized Clinical Study ◽  
Alveolar Ridge Preservation

Background: The objective of this investigation was to examine whether determination of bone density (BD) with a cone beam computed tomography (CBCT) scan could help predict the primary stability (PS) of the implants and to investigate whether associations between the histomorphometric findings and the CBCT scan could be observed. Materials and methods: In this randomized clinical study, the efficacy of alveolar ridge preservation (ARP) with a combination of a collagen cone and a collagen membrane procedure after tooth extraction was investigated. CBCT scans were obtained after a healing period of 8 (±1) weeks. Subsequently, the CBCT scans were evaluated in terms of BD at different heights of the former socket. Eleven (±1) weeks after tooth extraction, implant placement was performed and PS was measured with resonance frequency analysis. Potential associations among the radiologically measured BD, the histomorphometric results, and the PS were analyzed. Results: No direct association was observed between the radiologically determined BD and the histomorphometric findings. No significant associations could be found between the BD and the PS. Conclusion: No significant associations were observed among the BD determined by the CBCT, the histomorphometric findings, and the PS.

Digital workflow for alveolar ridge preservation with equine-derived bone graft and subsequent implant rehabilitation: a case report

2020 ◽  
Author(s):  
Danielle Ayumi Nishimura ◽  
Christyan Iida ◽  
Ana Luiza Esteves Carneiro ◽  
Emiko Saito Arita ◽  
Claudio Costa ◽  
...  
Keyword(s):  
Case Report ◽  
Bone Grafting ◽  
Software Tool ◽  
Cone Beam ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Digital Workflow ◽  
Computed Tomographic ◽  
Alveolar Ridge Preservation ◽  
Volume Measurements

This case report describes a digital workflow used for three main purposes: to predict the volume of particulate grafting material required to perform alveolar ridge preservation; to conduct subsequent virtual implant planning; and to digitally design the respective implant-supported crown. The volume of equine-derived bone grafting material required for filling the alveolar socket is digitally estimated in cubic millimeters from cone beam computed tomographic (CBCT) data using a specific software tool for volume measurements. Digital crown design from an intraoral scan allows for milling the definitive implant-supported crown. For this purpose, a scan body can be used and even slightly trimmed externally to avoid excessive proximity with an adjacent rotated tooth.

Sign in / Sign up

Export Citation Format

Share Document