RELIABILITY OF DISTRIBUTION ELECTRICAL GRIDS VOLTAGE 6-10 kV

Author(s):  
Петр Михайлович Барышев

В статье дана характеристика надежности распределительных электрических сетей. Приведена классификация и статистические данные технического состояния линий электропередачи напряжением 6-10 кВ. Проанализированы причины низкого уровня надежности сетей. The article describes the characteristics of the reliability of electrical distribution grids. The classification and statistical data of the technical condition of power transmission lines with a voltage of 6-10 kV are given. The reasons for the low level of network reliability are analyzed.

2021 ◽  
Vol 14 (2) ◽  
pp. 100-107
Author(s):  
E. M. Farhadzadeh ◽  
A. Z. Muradalyiev ◽  
S. A. Muradalyiev ◽  
A. A. Nazarov

The organization of operation, maintenance and repair of the basic technological facilities of electric power systems (EPS), which are beyond their designed service life (hereinafter referred to as ageing facilities, or AFs) is one of the problems that determine the energy security of many countries, including economically developed nations. The principal cause of insufficient overall performance of AFs is the traditional focus of the EPS management on economic efficiency and the insufficient attention to reliability and safety of AFs. The tendency to nonlinear growth in the frequency of occurrence of unacceptable consequences in the EPS requires ensuring the operational reliability and safety of AFs. The averaged estimates of reliability and safety used at designing power facilities are not suitable for characterization of overall operational performance. Among the basic and the least investigated (in terms of operational reliability and safety) EPS facilities are overhead power transmission lines (OPL) with a voltage of 110 кV and above. This is for a reason. OPL are electric power facilities with elements distributed along a multi-kilometer line (supports, insulators, wires, accessories, etc.). That is what makes the organization of continuous monitoring of the technical condition of each of these elements, and, consequently, the assessment of operational reliability and safety, so problematic. A method is suggested for assessment of “weak links” among the operated OPL on operative intervals of time along with a method for assessment of the technical condition of OPL at examination of a representative sample.


2021 ◽  
Vol 273 ◽  
pp. 04017
Author(s):  
Elena Shlyakhova ◽  
Irina Serebryanaya ◽  
Inna Egorochkina ◽  
Andrey Matrosov ◽  
Maxim Odinets ◽  
...  

Power transmission lines (PTL) are strategic objects, the reliability of which depends on the life support of the country. Most of the currently operated power transmission lines were put into operation in the twentieth century, and by now there is a problem of assessing their technical condition, repairing them, if necessary, and maintaining them in a working condition. Defects that appear during the operation of reinforced concrete elements of power transmission lines have different localization and degree of manifestation, but typical is the destruction of the surface layer of concrete with exposure of rebar, more often at the base of the power transmission line. The aim of the work is to select the optimal composition of the repair mixture based on non-shrinking and expanding cements, ensuring reliable adhesion of the repair compounds to the concrete of the structure, which will restore the bearing and operational characteristics in the repaired reinforced concrete elements of the power transmission line at the design level.


2021 ◽  
Vol 279 ◽  
pp. 01029
Author(s):  
Alexander Yurov ◽  
Alexander Voronov ◽  
Alexey Lukonin ◽  
Vasiliy Yurov

Were considered the technical solutions sufficient for the development of smart systems for automatic information and measurement metering of electrical energy and monitoring of overhead power transmission lines of the 110-220 kV electrical grids, considering the integration of the data flow into Scada-systems of digital substation workplaces in all the accordance with the standard protocols of IEC 61850. The device allows you to control the quality of transmitted electricity, remotely monitor the condition of the line, thereby increasing the reliability of power supply and power flows in the power system, reducing the cost of operational teams for their inspection.


2016 ◽  
Vol 2016 (4) ◽  
pp. 8-10 ◽  
Author(s):  
B.I. Kuznetsov ◽  
◽  
A.N. Turenko ◽  
T.B. Nikitina ◽  
A.V. Voloshko ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1561
Author(s):  
Hao Chen ◽  
Zhongnan Qian ◽  
Chengyin Liu ◽  
Jiande Wu ◽  
Wuhua Li ◽  
...  

Current measurement is a key part of the monitoring system for power transmission lines. Compared with the conventional current sensor, the distributed, self-powered and contactless current sensor has great advantages of safety and reliability. By integrating the current sensing function and the energy harvesting function of current transformer (CT), a time-multiplexed self-powered wireless sensor that can measure the power transmission line current is presented in this paper. Two operating modes of CT, including current sensing mode and energy harvesting mode, are analyzed in detail. Through the design of mode-switching circuit, harvesting circuit and measurement circuit are isolated using only one CT secondary coil, which eliminates the interference between energy harvesting and current measurement. Thus, the accurate measurement in the current sensing mode and the maximum energy collection in the energy harvesting mode are both realized, all of which simplify the online power transmission line monitoring. The designed time-multiplexed working mode allows the sensor to work at a lower transmission line current, at the expense of a lower working frequency. Finally, the proposed sensor is verified by experiments.


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Vedanta Pradhan ◽  
O. D. Naidu ◽  
Sinisa Zubic ◽  
Patrick Cost

Sign in / Sign up

Export Citation Format

Share Document