Long-Distance Brillouin Optical Time Domain Reflectometer with Two-Parameter Sensing for Standard Single-Mode Optical Fiber

2010 ◽  
Vol 30 (4) ◽  
pp. 954-958
Author(s):  
宋牟平 Song Muping ◽  
裘超 Qiu Chao
2018 ◽  
Vol 0 (0) ◽  
Author(s):  
Nandhakumar Pandi ◽  
Mohasin Naragund

AbstractNow a day all the telecommunication industries are using fibers for faster data communication and long distance communication. Fibers use light as the information and it is carried over long distances. Optical fiber has large advantages over a copper and co-axial cable because of its lower attenuation and interference. Optical time domain reflectometer (OTDR) is also one of the important devices using in telecommunication industries to characterize an optical fiber. This article deals with the study of long distance backbone single mode fiber and their features are discussed with the use of an OTDR. The results of this article focused on the losses and breaks of the fiber with the events. The Single mode OTDR is used to find the events, losses and breaks of the backbone fiber between the two locations. This work will give a way to study the nature of optical fibers and understand the practical application of optical fiber communication.


1985 ◽  
Vol 10 (3) ◽  
pp. 157 ◽  
Author(s):  
Masataka Nakazawa ◽  
Masahiro Ikeda ◽  
Takashi Nakashima ◽  
Shigeyuki Seikai

2010 ◽  
Vol 58 (4) ◽  
pp. 513-517 ◽  
Author(s):  
M. Ratuszek ◽  
Z. Zakrzewski ◽  
J. Majewski

Reflectometric measurements of thermally expanded core area In this work an analysis method of one-way optical time domain reflectometer (OTDR) measurements has been presented. This method uniquely confirms mode field radii matching in diffusion transit area of the thermally expanded core (TEC) of thermally connected single mode telecommunication fibers. A comparison of reflectometric measurements with theoretical calculations of losses in TEC areas has been demonstrated.


Transmisi ◽  
2018 ◽  
Vol 20 (3) ◽  
pp. 127
Author(s):  
Dodi Setiabudi ◽  
Wahyu Muldayani

Pada penelitian ini telah dilakukan analisis Rugi-rugi redaman yang dipengaruhi oleh lengkungan dengan beberapa variasi jari-jari lengkungan pada sistem komunikasi serat optic di jaringan FTTH. Ada tiga titik kabel serat optik yang akan diukur dengan jenis Single Mode Step Index pada panjang gelombang 1310 nm. Alat bantu yang digunakan adalah Optical Time Domain Reflectometer (OTDR) tipe ANRITSU. Data dari pengukuran akan dibandingkan dengan data dari analisis perhitungan guna mencari nilai daya terima. Metode yang digunakan adalah power link budget dan power loss fiber. Dari hasil penelitian ini didapatkan bahwa saat jari-jari sebesar 0.3 cm dihasilkan nilai Rugi-rugi sebesar 13.6921 dB, sehingga nilai daya transmisi sebesar 60 dB berkurang menjadi 46.3079 dB. Besar nilai jari-jari lengkungan berbanding terbalik dengan nilai Rugi-rugi redaman. Namun berbanding lurus dengan nilai daya terima. Adanya variasi jari-jari lengkungan dengan sudut lengkungan rata-rata 75.730 yang masih layak terhadap sudut kritis 45.280dan panjang serat optik dapat mempengaruhi besar kecilnya nilai Rugi-rugi yang akan dihasilkan serta daya terima pada sistem dengan rata-rata presentase error persen tidak melebihi 1%.


Sign in / Sign up

Export Citation Format

Share Document