A Practical Solution For Detecting The Bedrock Depth Beneath The Strong Ground Motion’S Stations: A Case Study For Kocaeli Province (Turkey)

2017 ◽  
Author(s):  
H. Livaoğlu ◽  
F. Sertçelik
Keyword(s):  
Practical Solution ◽  
Bedrock Depth ◽  
Strong Ground

scholarly journals Anaerobic digestion life cycle assessment (LCA)

2020 ◽  
Vol 2 (5) ◽  
pp. 92-104
Author(s):  
Farhad Sakhaee
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Training Center ◽  
Treatment Facility ◽  
Practical Solution ◽  
Treatment Facilities ◽  
Management Report

Abstract: Life cycle assessment (LCA) is a tool to evaluate environmental impacts based on products of a process. This research is a case study of wastewater treatment facilities of ERTC (Environmental Resources Training Center), SIUE University, based on available data for two semi-annual sludge quantities (year 2015) from sludge management report. The aim of this study is to compare set of possibilities for a wastewater treatment facility at ERTC. The simulation has been done through SimaPro model. Electricity and methane were considered and the cumulative weight of their impacts has been investigated. Total solids for two semi-annual sludge has been fed to the model in kilogram and different production (electricity and methane) configuration were investigated. The most plausible configuration based on the cumulative environmental impact proposed as best practical solution.

Case study of strong ground motion variations across cut slope

2005 ◽  
Vol 25 (7-10) ◽  
pp. 539-545 ◽  
Author(s):  
Jonathan P. Stewart ◽  
Shawn E. Sholtis
Keyword(s):  
Ground Motion ◽  
Strong Ground Motion ◽  
Cut Slope ◽  
Strong Ground

Solutions for Measuring the Position Deviation for Internal Keyways – Case Study

2014 ◽  
Vol 657 ◽  
pp. 669-673
Author(s):  
Adriana Munteanu ◽  
Florentin Cioata
Keyword(s):  
Theoretical Analysis ◽  
Point Of View ◽  
Theoretical Point ◽  
Series Production ◽  
Industrial Practice ◽  
Practical Solution ◽  
Measuring Methods ◽  
Small Series ◽  
Nominal Position

The measurement of symmetry and nominal position deviation from theoretical point of view is not a problem, the main issues appears when these theoretical aspects aren’t applicable in industrial practice. The problem addressed in this paper is to identify the possibility to develop a method for the intermediary control like a necessity to industrial practice but for a small series production.A theoretical analysis was developed in order to identify the measuring possibility of symmetry and nominal position deviation for a specific keyway. Using chart ideas and making a case study, we thought to find a practical solution of the intermediary control for specific keyways gears, in small series production case. The research tries to highlight some common and distinct aspects specific for those measuring methods and to solve the issue of intermediary control for a small series production in case of gears internal keyways.

scholarly journals Parallelisation technique for serial 3D seismic codes: SMS approach

2010 ◽  
Vol 52 (5) ◽  
Author(s):  
Arrigo Caserta ◽  
Vittorio Ruggiero ◽  
Maria Pia Busico ◽  
Ivo Oprsˇal
Keyword(s):  
Ad Hoc ◽  
Seismic Wave Propagation ◽  
3D Seismic ◽  
Geological Structures ◽  
Speed Up ◽  
Dissipative Media ◽  
Profiling Analysis ◽  
Modelling System ◽  
Strong Ground

<p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">We investigate a fast and easy way to parallelise seismological serial codes mainly oriented for simulating the</p> <p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">seismic wave propagation through anelastic dissipative media. Having an efficient modelling tool is important</p> <p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">in both assessing strong ground motion and mitigation of seismic hazard when the site effects are considered,</p> <p style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">and in crustal propagation when the crustal geological structures are of interest. Our chosen case study is representative of a set of such seismological 3D problems. The Scalable Modelling System (SMS) tool for parallelization is considered. The IBM SP5 native compiler has been used. Results such as Speed-Up and Efficiency are shown and discussed. SMS can run both in shared and distributed memory environments. The greater advantages of using SMS in such environments become apparent with the utilisation of a higher number of multiprocessor machines arranged in a cluster. We also demonstrate how successful porting from serial to parallel codes is realised by way of minimal instructions (6% of the serial original code only) provided that an ad hoc profiling analysis of the serial code is first performed.</p> <br />

Sign in / Sign up

Export Citation Format

Share Document