COD Removal and Electricity Generation From Domestic Wastewater Using Different Anode Materials in Microbial Fuel Cells

2019 ◽  
Vol 8 (1) ◽  
pp. 1-12
Author(s):  
G. Shyamala ◽  
N. Saravanakumar ◽  
E. Vamsi Krishna
Keyword(s):  
Power Generation ◽  
Wastewater Treatment ◽  
Fuel Cells ◽  
Microbial Fuel Cells ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Salt Bridge ◽  
Anode Chamber ◽  
Cathode Chamber

Microbial fuel cells (MFCs) set a new trend of converting chemical energy or bio energy to electricity from wastewater (domestic and industries) at the same time removal of chemical oxygen demand (COD) from the wastewater. Electrical energy generated from microbial fuel cell could be used for small electrical device example biosensors. The main components of MFCs are the anode, and the cathode salt bridge. It contains an anode chamber and a cathode chamber which separate electrodes for the production of electricity, using wastewater in an anaerobic chamber helps grow native microorganisms. Adding substrates increases productivity of the electrons that are moving from the anode chamber to the cathode chamber by help of the salt bridge. Bioreactors based on power generation in MFCs are a new approach to wastewater treatment. Power generation and current is modulated in this system. If it is optimised, MFCs would prove to be new method to offset wastewater treatment plant operating costs.

scholarly journals Bioelectricity production from tofu wastewater using microbial fuel cells with microalgae Spirulina sp as catholyte

2020 ◽  
Vol 202 ◽  
pp. 08007
Author(s):  
Wahyu Zuli Pratiwi ◽  
Hadiyanto Hadiyanto ◽  
Purwanto Purwanto ◽  
Muthi’ah Nur Fadlilah
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cells ◽  
Microbial Fuel Cells ◽  
Organic Waste ◽  
Oxygen Demand ◽  
Salt Bridge ◽  
Cod Removal ◽  
Biofuel Production ◽  
Pre Treatment ◽  
Made In

Microalgae-Microbial Fuel Cells (MMFCs) are very popular to be used to treat organic waste. MMFCs can function as an energy-producing wastewater pre-treatment system. Wastewater can provide an adequate supply of nutrients, support the large capacity of biofuel production, and can be integrated with existing wastewater treatment infrastructure. The reduced content of Chemical Oxygen Demand (COD) is one way to measure the efficiency of wastewater treatment. MMFCs reactors are made in the form of two chambers (anode and cathode) both of which are connected by a salt bridge. Tofu wastewater as an anode and Spirulina sp as a cathode. To improve MFCs performance which is to obtain maximum COD removal and electricity generation, nutrient NaHCO3 as the nutrient carbon source for Spirulina sp was varied. The system running phase on 12 days. The results were Spirulina sp treated with MFCs technology has better growth than non-MFCs. The MMFC generated a maximum power density of 21.728 mW/cm2 and achieved 57.37% COD removal. These results showed that the combined process was effective in treating tofu wastewater.

scholarly journals Use of a duckweed pond for the domestic wastewater polishing in Ilha Solteira, SP, Brazil

2017 ◽  
Vol 28 (4) ◽  
pp. 477-489 ◽  
Author(s):  
Daiane Cristina de Oliveira Garcia ◽  
Liliane Lazzari Albertin ◽  
Tsunao Matsumoto
Keyword(s):  
Wastewater Treatment ◽  
Biomass Production ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Treatment System ◽  
Content Type ◽  
Stabilization Pond ◽  
Domestic Effluent ◽  
Duckweed Pond

Purpose The purpose of this paper is to evaluate the efficiency of a duckweed pond in the polishing of a stabilization pond effluent, as well as quantify its biomass production. Once an adequate destination is given to the produced biomass, the wastewater treatment plant can work in a sustainable and integrated way. Design/methodology/approach The duckweed pond consisted of a tank with volume 0.44 m3, operating in continuous flow with an outflow of 0.12 m3/day and hydraulic retention time of 3.8 days. Effluent samples were collected before and after the treatment, with analyzes made: daily-pH, dissolved oxygen and temperature; twice a week – total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD); and weekly – total solids (TS) and Biochemical Oxygen Demand (BOD5). The duckweeds were collected each for seven days for its production quantification. Findings The highest efficiency of TN, TP, COD, BOD5 and TS removal were of 74.67, 66.18, 88.12, 91.14 and 48.9 percent, respectively. The highest biomass production rate was 10.33 g/m2/day in dry mass. Research limitations/implications There was great variation in biomass production, which may be related to the stabilization pond effluent conditions. The evaluation of the effluent composition, which will be treated with duckweeds, is recommended. Practical implications The evaluated treatment system obtained positive results for the reduction in the analyzed variables concentration, being an efficient technology and with operational simplicity for the domestic effluent polishing. Originality/value The motivation of this work was to bring a simple system of treatment and to give value to a domestic wastewater treatment system in a way that, at the same time the effluent polluter level is reduced and it is also possible to produce biomass during the treatment process.

scholarly journals Using Shewanella Oneidensis MR1 as a Biocatalyst in a Microscale Microbial Fuel Cell

2013 ◽  
Author(s):  
Jie Yang ◽  
Sasan Ghobadian ◽  
Reza Montazami ◽  
Nastaran Hashemi
Keyword(s):  
Power Generation ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Shewanella Oneidensis ◽  
Proton Exchange ◽  
Carbon Cloth ◽  
Anode Chamber

Microbial fuel cell (MFC) technology is a promising area in the field of renewable energy because of their capability to use the energy contained in wastewater, which has been previously an untapped source of power. Microscale MFCs are desirable for their small footprints, relatively high power density, fast start-up, and environmentally-friendly process. Microbial fuel cells employ microorganisms as the biocatalysts instead of metal catalysts, which are widely applied in conventional fuel cells. MFCs are capable of generating electricity as long as nutrition is provided. Miniature MFCs have faster power generation recovery than macroscale MFCs. Additionally, since power generation density is affected by the surface-to-volume ratio, miniature MFCs can facilitate higher power density. We have designed and fabricated a microscale microbial fuel cell with a volume of 4 μL in a polydimethylsiloxane (PDMS) chamber. The anode and cathode chambers were separated by a proton exchange membrane. Carbon cloth was used for both the anode and the cathode. Shewanella Oneidensis MR-1 was chosen to be the electrogenic bacteria and was inoculated into the anode chamber. We employed Ferricyanide as the catholyte and introduced it into the cathode chamber with a constant flow rate of approximately 50 μL/hr. We used trypticase soy broth as the bacterial nutrition and added it into the anode chamber approximately every 15 hours once current dropped to base current. Using our miniature MFC, we were able to generate a maximum current of 4.62 μA.

Microbial fuel cells for wastewater treatment

2006 ◽  
Vol 54 (8) ◽  
pp. 9-15 ◽  
Author(s):  
P. Aelterman ◽  
K. Rabaey ◽  
P. Clauwaert ◽  
W. Verstraete
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cells ◽  
Potential Energy ◽  
Microbial Fuel Cells ◽  
Energy Recovery ◽  
Oxygen Demand ◽  
Wastewater Effluent ◽  
Hospital Wastewater ◽  
Potato Processing ◽  
Conversion Efficiencies

Microbial fuel cells (MFCs) are emerging as promising technology for the treatment of wastewaters. The potential energy conversion efficiencies are examined. The rates of energy recovery (W/m3 reactor) are reviewed and evaluated. Some recent data relating to potato-processing wastewaters and a hospital wastewater effluent are reported. Finally, a set of process configurations in which MFCs could be useful to treat wastewaters is schematized. Overall, the MFC technology still faces major challenges, particularly in terms of chemical oxygen demand (COD) removal efficiency.

Sign in / Sign up

Export Citation Format

Share Document