Research on Monitoring System for Transfusion in Hospital

2013 ◽  
Vol 385-386 ◽  
pp. 500-503
Author(s):  
Hai Qun Wang ◽  
Mei Xu
Keyword(s):  
Control System ◽  
Monitoring System ◽  
Hospital Care ◽  
Computer Control ◽  
Stepper Motor ◽  
Computer Control System ◽  
Existing Problems ◽  
The Core ◽  
Automation Level ◽  
Upper Computer

In order to solve the existing problems of artificial monitoring transfusion treatment and enhance the automation level of the hospital care and management, a hospital infusion monitoring system is designed. Hospital infusion monitoring system adopts the structure of distributed computer control system, adopts RS485 bus to realize the communication between the upper computer and the lower computer. The lower computer uses MSP430F149 MCU as the core, implements the dripping speed detection, the drug liquid remaining amount detection, at the same time to adjust dripping speed by controlling the stepper motor. PC microcomputer as the monitoring center, accepts data that transmits from the lower computer, and displays, storages, analysises and statistics, at the same time controls the lower computer.

scholarly journals Design and Performance Simulation of Computer Control System for Automatic Monitoring of Upper Computer Communication Operation State

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Li Yang ◽  
Huitao Zhang
Keyword(s):  
Control System ◽  
Real Time ◽  
Data Storage ◽  
Computer Control ◽  
Automatic Monitoring ◽  
Computer Control System ◽  
Computer Communication ◽  
Opc Server ◽  
Industrial Boiler ◽  
Upper Computer

The upper computer communication operation state automatic monitoring system is mainly used to remotely monitor the equipment, obtain various parameter indexes in the operation process of remote equipment, realize remote monitoring and fault diagnosis, and improve the management efficiency of decentralized equipment. This paper completes the design of communication, data storage, query, and other subsystems of upper and lower computers. The lower computer establishes a data channel with the OPC server through the MPI protocol and uploads the collected data to the OPC server in real time. The upper computer reads the data through the OPC server and displays the changes of monitored parameters in real time through the monitoring interface, so as to give an alarm under abnormal conditions. In addition, since the default database of Kingview is access, considering that the Microsoft Access database can store up to 2G of content, in order to upgrade and expand the subsequent system, SQL Server database is selected for data query, backup, and saving. The parameter setting method of communication control system is analyzed, the simulation model of industrial boiler control system is established by using Matlab/Simulink, and the interface between host computer software (IBCCS-e) and the model is provided. This paper analyzes the results of communication parameter adjustment. The simulation results show that the industrial boiler computer control system (IBCCS) has stable performance, low cost, convenient operation, and good maintainability. After further improvement, it has certain application value in the operation transformation of new small- and medium-sized boilers and original boilers.

scholarly journals PEP Computer Control System

1979 ◽  
Vol 26 (3) ◽  
pp. 3267-3271 ◽  
Author(s):  
A. W. Chao ◽  
R. A. Early ◽  
J. D. Fox ◽  
A. E. Gromme ◽  
R. H. Helm ◽  
...  
Keyword(s):  
Control System ◽  
Computer Control ◽  
Computer Control System

Computer Control System for Continuous Reheating Furnace

1981 ◽  
Vol 14 (2) ◽  
pp. 2619-2624
Author(s):  
M. Kamata ◽  
S. Murakami ◽  
H. Wakasuki
Keyword(s):  
Control System ◽  
Computer Control ◽  
Computer Control System ◽  
Reheating Furnace

Design of Hydraulic Descaling Computer Control System

2014 ◽  
Vol 608-609 ◽  
pp. 19-22
Author(s):  
Ping Xu ◽  
Jian Gang Yi
Keyword(s):  
Control System ◽  
Stability Problem ◽  
Computer Control ◽  
Control Methods ◽  
Computer Control System ◽  
Control Software ◽  
Pressure Water ◽  
Working Principle ◽  
The Stability

Hydraulic descaling system is the key device to ensure the surface quality of billet. However, traditional control methods lead to the stability problem in hydraulic descaling system. To solve the problem, the construction of the hydraulic descaling computer control system is studied, the working principle of the system is analyzed, and the high pressure water bench of hydraulic descaling is designed. Based on it, the corresponding computer control software is developed. The application shows that the designed system is stable in practice, which is helpful for enterprise production.

Once Bitten — Twice Shy

1980 ◽  
Vol 13 (10) ◽  
pp. i-i
Author(s):  
Joe Wilson
Keyword(s):  
Control System ◽  
Process Control ◽  
Control Engineer ◽  
Computer Control ◽  
Digital System ◽  
Computer Control System ◽  
Computer Based ◽  
New System

Outlines the problems and self-questioning facing the process control engineer when deciding to replace the computer control system which he has found difficult to justify over the last decade. Should he return to conventional analogue instrumentation or choose a microprocessor based control system? Having highlighted in his mind the problems with his computer based system, has he missed the majority of the advantages which a digital system brings? Does he realise that a major manufacturer has been acutely aware of his problems and has sought to eliminate them with the design of any new system? Can his faith be restored?

Sign in / Sign up

Export Citation Format

Share Document