Design for Remote Monitoring System of Digital Radio and Television Transmitter

2014 ◽  
Vol 543-547 ◽  
pp. 908-911
Author(s):  
Hong She Dang ◽  
Gang Wang ◽  
Ying Zhang
Keyword(s):  
Monitoring System ◽  
Remote Monitoring ◽  
Middle Layer ◽  
Sql Server ◽  
Digital Radio ◽  
Remote Monitoring System ◽  
Overall Design ◽  
Sql Server Database ◽  
Client Data ◽  
Ethernet Network

In order to achieve the remote monitoring of transmitter running status, a transmitter architecture of remote monitoring system based on a three-layer C/S architecture is proposed, and the overall design of the system is presented. Compared with the traditional two layers structure, the function of the client data processing is separated for implementing alone, which is treated as a middle layer called business logic layer. LabVIEW is used for the software development of the system. Communication of the local monitoring system is achieved by the Ethernet network based on TCP/IP protocol. SQL Server database is adopted to store and manage the run data and log data. The result shows that the system has good flexibility and extensibility, it also has higher application value and popularization value.

Design of PC Remote Monitoring System for Standby Generators

2014 ◽  
Vol 1039 ◽  
pp. 197-202
Author(s):  
Chuan Hong Zhou ◽  
Jin Jie Xiao ◽  
Wei Ren
Keyword(s):  
Monitoring System ◽  
Remote Monitoring ◽  
Interface Design ◽  
Database Design ◽  
Sql Server ◽  
Monitoring Device ◽  
Remote Monitoring System ◽  
Remote Server ◽  
Sql Server Database ◽  
Low Efficiency

Currently,some problems exist in the process of using standby generators, such as low efficiency,high cost and late service of artificial overhaul and maintenance.In order to overcome these problems, PC remote monitoring system is designed.This paper mainly introduces the structure composition,function,interface design and SQL Server database design of the system.In addition, the function of communication between the PC remote server and signal monitoring device was tested and the effect was desired

Development of Electric Vehicle Remote Monitoring System's Server and Client Application

2014 ◽  
Vol 535 ◽  
pp. 26-31
Author(s):  
Zhi Zhong Li ◽  
Shi Chun Yang ◽  
Zi Tao Liu
Keyword(s):  
Electric Vehicle ◽  
Monitoring System ◽  
Remote Monitoring ◽  
Sql Server ◽  
Client Application ◽  
Electric Cars ◽  
Remote Monitoring System ◽  
Sql Server Database ◽  
Database Language ◽  
Client Needs

This paper analyzed the practical needs of remote monitoring of electric vehicle and illustrates the overall architecture of a remote monitoring system, and further developed a remote monitoring system of the Server and client application with the ASP.NET and Microsoft SQL Server database language, basically can meet the electric cars remote monitoring of the Server and client needs.

Design of a Remote Monitoring System Based on the TCP/IP Protocol

2013 ◽  
Vol 339 ◽  
pp. 313-317
Author(s):  
Rui Peng ◽  
Yong Dong Li ◽  
Guang Yang
Keyword(s):  
Monitoring System ◽  
Remote Monitoring ◽  
High Stability ◽  
Low Cost ◽  
Management Control ◽  
Host Computer ◽  
Distributed Monitoring ◽  
Remote Monitoring System ◽  
Sensor Signals ◽  
Ethernet Network

With the development of science and technology, the remote monitoring system is more and more widely used in management control integration systems. The remote monitoring system proposed in this paper is composed of sensor, collector adapted to various sensor signals and host computer of monitoring center. The collector whose core control chip is STR912FW based on ARM9 structure, is distributed in monitor environment as independent node, and communicates with host computer though Ethernet network (TCP/IP Protocol). It has been shown that the monitoring system has many advantages such as supporting online distributed monitoring, adding or removing nodes conveniently, low cost, high stability and high practicability.

Analysis and Design of Autonomous Remote Monitoring System for Underwater Targets

2014 ◽  
Vol 602-605 ◽  
pp. 1538-1541
Author(s):  
Peng Fei Peng ◽  
Liang Huang ◽  
Jian Qiang Zhang
Keyword(s):  
Monitoring System ◽  
Remote Monitoring ◽  
Information Network ◽  
Analysis And Design ◽  
Remote Monitoring System ◽  
Overall Design ◽  
Function Modules ◽  
Working Principle ◽  
Underwater Targets ◽  
Underwater Target

Demands for remote monitoring of underwater targets are analyzed, and the basic concept of autonomous underwater target remote monitoring system is put forward in this paper. The working principle of autonomous underwater target remote monitoring system, the composition of the structure and the overall design of function modules are given. The underwater target detection device is designed in detail.Through the analysis and design of the system, the feasibility and practicability of autonomous underwater target remote monitoring system are fully demonstrated, which has broad application prospects in the water information network construction.It will further improve the detection and reconnaissance capability for remote underwater targets.

Research on Distributed Remote Monitoring System for NC Machine Tools

2012 ◽  
Vol 190-191 ◽  
pp. 786-789
Author(s):  
Xing Guo Han ◽  
Bin Wu Wang
Keyword(s):  
Monitoring System ◽  
Remote Monitoring ◽  
Machine Tools ◽  
Middle Layer ◽  
Linear Interpolation ◽  
Remote Monitoring System ◽  
Middleware Technology ◽  
Nc Machine ◽  
Nc Machine Tools ◽  
Circular Interpolation

A whole design scheme of distributed remote monitoring system of NC machine tools is put forward and the middleware technology of combination of CORBA and web service is importantly discussed in this paper.This system is divided into three layers—field layer,middle layer and user layer. Finally, in this system platform, the errors of circular interpolation and linear interpolation are measured.

Design and Realization of Remote Monitoring System for Automatic Forced Fitting Production Line

2011 ◽  
Vol 201-203 ◽  
pp. 2354-2359
Author(s):  
Jiang Hong Cui ◽  
Xue Song Zhang ◽  
Ji Hua Zhu
Keyword(s):  
Control System ◽  
Monitoring System ◽  
Remote Monitoring ◽  
Production Line ◽  
Lower Degree ◽  
Remote Monitoring System ◽  
Overall Design ◽  
Fitting Procedure ◽  
Fitting Production ◽  
Automation Control

In this paper, Aim at the lower degree of automation in forced fitting procedure between spindle blade and whorl in spinning machine, an automatic forced fitting production line is successfully designed. Based on PLC, the fully-automation control system to the production line is developed through analyzing the overall design scheme of the production line and the rapport between each workstation. Moreover, the remote monitoring system of forced-fitting production line has been implemented with the combination of powerful WinCC software with PLC technology.

Sign in / Sign up

Export Citation Format

Share Document