scholarly journals 3-D Numerical Study of Mechanical Behaviors of Pile-Anchor System

2014 ◽  
Vol 580-583 ◽  
pp. 238-242
Author(s):  
Ri Cheng Liu ◽  
Bang Shu Xu ◽  
Bo Li ◽  
Yu Jing Jiang
Keyword(s):  
Simulation Analysis ◽  
Numerical Study ◽  
Bending Moments ◽  
Mechanical Behaviors ◽  
Foundation Pit ◽  
Anchor System ◽  
Anchor Cable ◽  
Axial Forces ◽  
Toppling Failure ◽  
Potential Failure

Mechanical behaviors of pile-soil effect and anchor-soil effect are significantly important in supporting engineering activities of foundation pit. In this paper, finite difference method (FDM) was utilized to perform the numerical simulation of pile-anchor system, composed of supporting piles and pre-stressed anchor cables. Numerical simulations were on the basis of the foundation pit of Jinan’s West Railway Station, and 3D simulation analysis of foundation pit has been prepared during the whole processes of excavation, supporting and construction. The paper also analyzed the changes of bending moments of piles and axial forces of cables, and discussed mechanical behaviors of pile-anchor system, through comparisons with field monitoring. The results show that the parameters concluding vertical gridding’s number, cohesion of pile and soil, and pile stiffness have robust influences on supporting elements’ behaviors. Mechanical behaviors of supporting pile and axial forces of anchor cable changed dramatically, indicating that the potential failure form was converted from toppling failure to sliding failure.

Stiffened Hangers: an Often Overlooked Tool for Conceptual Design of Tied-Arch Footbridges

2021 ◽  
Author(s):  
Juan José Jorquera-Lucerga ◽  
Juan Manuel GARCÍA-GUERRERO
Keyword(s):  
Low Cost ◽  
Three Dimensional ◽  
Structural Response ◽  
Bending Moments ◽  
Structural Element ◽  
Axial Forces ◽  
Limited Effectiveness ◽  
Out Of Plane ◽  
Arch Bridges ◽  
Fixed End

<p>In tied-arch bridges, the way the arch and the deck are connected may become crucial. The deck is usually suspended from hangers made out of steel pinned cables capable of resisting axial forces only. However, a proper structural response, (both in-plane and out-of-plane) may be ensured by fixing and stiffening the hangers in order to resist, additionally, shear forces and bending moments. This paper studies the effect of different pinned and stiffened hanger arrangements on the structural behavior of the tied-arch footbridges, with the intention of providing designers with useful tools at the early steps of design. As a major conclusion, regarding the in-plane behavior, hangers composed of cables (either with vertical, Nielsen-Löhse or network arrangements) are recommended due to its low cost and ease of erection. Alternatively, longitudinally stiffened hangers, fixed at both ends, can be used. Regarding the out-of-plane behavior, and in addition to three-dimensional arrangements of cables, of limited effectiveness, transversally stiffened hangers fixed at both ends are the most efficient arrangement. A configuration almost as efficient can be achieved by locating a hinge at the end corresponding to the most flexible structural element (normally the arch). Its efficiency is further improved if the cross-section tapers from the fixed end to the pinned end.</p>

Numerical Simulation Analysis for Enclosure Piles Cracking of a Deep Pit Foundation

2011 ◽  
Vol 109 ◽  
pp. 276-280
Author(s):  
Ji Chao Zhang ◽  
Yong Kang Yang ◽  
Yong Xu
Keyword(s):  
Numerical Simulation ◽  
Simulation Analysis ◽  
Element Model ◽  
Wind Load ◽  
Load Direction ◽  
Foundation Pit ◽  
Deep Pit ◽  
Disadvantageous Factors ◽  
Construction Condition ◽  
The Finite Element Model

Based on the appearance of crack of enclosure piles on a foundation pit, Midas GTS is adopted to establish the finite element model. Through the numerical simulation, the influence of the direction of wind load, wind scale and prestress of anchor are analyzed, the worst wind load direction, unfavorable construction condition, maximum moment of enclosure piles are ensured, crack width in different disadvantageous factors are calculated, which provides a guide for continuous construction.

Non-Linear Three-Dimensional Finite Element Analysis of Some Extremely Deep Foundation Pit Support

2013 ◽  
Vol 443 ◽  
pp. 79-83
Author(s):  
Zhen Xi Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Element Analysis ◽  
Deep Foundation Pit ◽  
Three Dimensional Finite Element ◽  
Support Engineering

In recent years, with the enhancement of overall national strength in China, the computer simulation technology has been developed rapidly and widely applied to engineering construction. Particularly, investment proportion of the technology in deep foundation pit engineering is immense. Yet affected by national conditions in China, the construction and application of deep foundation pit engineering have many extensive factors. It also results in insufficient vigor of finite element analysis of deep foundation pit support construction. In this way, construction problems arise frequently under the condition that there exist buildings around. With some deep foundation pit support engineering, the thesis conducts simulation analysis of the engineering through the technology of nonlinear three-dimensional finite element.Project profile

scholarly journals Numerical Simulation Analysis of NPR Anchorage Monitoring of Bedding Rock Landslide in Open-Pit Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Kai Zhang ◽  
Xiaojie Yang ◽  
Xuebin Cui ◽  
Yong Wang ◽  
Zhigang Tao
Keyword(s):  
Numerical Simulation ◽  
Early Warning ◽  
Simulation Analysis ◽  
Failure Process ◽  
Open Pit Mine ◽  
Open Pit ◽  
Stress Monitoring ◽  
Anchor Cable ◽  
Whole Process ◽  
Rock Landslide

Nanfen open-pit iron mine is the largest single open-pit mine in Asia. Because of the lag of the extension project, the section has slowly spread in the shape of “V,” and disasters such as landslides occur frequently. In this study, first, the NPR anchor cable monitoring, which shows supernormal mechanical characteristics and can realize the monitoring and early warning target for the whole landslide process and early warning curve of bedding rock “2016-1101 landslide” in the lower wall of Nanfen open-pit mine, was analyzed, revealing the failure process of the bedding rock landslide and the force evolution characteristics of the NPR anchor cable. Then, based on the Fish language in FLAC3D and 3DEC software, the mechanical model of the NPR anchor cable was constructed, and numerical simulation was performed on the whole process of “16-1101 landslide” induced by accumulation of old landslide body. The results of this study indicate that the stress monitoring curves and failure characteristics of the NPR anchor cables in the whole process of landslide by the two numerical simulation methods are basically consistent with the field measurement results, providing a theoretical and practical basis for the mechanistic analysis and numerical simulation of other similar slopes.

Theoretical and numerical study on the block-flexure toppling failure of rock slopes

2019 ◽  
Vol 263 ◽  
pp. 105309 ◽  
Author(s):  
Yun Zheng ◽  
Congxin Chen ◽  
Tingting Liu ◽  
Haina Zhang ◽  
Chaoyi Sun
Keyword(s):  
Numerical Study ◽  
Rock Slopes ◽  
Toppling Failure
Sign in / Sign up

Export Citation Format

Share Document