Study of Truck’s Aerodynamic Drag Reduction Based on Jet

2014 ◽  
Vol 635-637 ◽  
pp. 316-319
Author(s):  
Peng Guo ◽  
Jun Yuan Zhang ◽  
Qi Fei Li ◽  
Xing Jun Hu
Keyword(s):  
Numerical Simulation ◽  
Comparative Analysis ◽  
Flow Field ◽  
Drag Reduction ◽  
Pressure Distribution ◽  
Aerodynamic Drag ◽  
Outer Flow ◽  
Air Movement ◽  
Maximum Drag Reduction ◽  
Aerodynamic Drag Reduction

Multiple schemes are adapted on truck's outer flow field based on numerical simulation. Comparative analysis with the state of air flow, the pressure distribution, the air movement between the cab and cargo is pursued, then obtain the effect of jet flow velocity to the truck Cd. With the increasing of the jet velocity, Cd increases first and then decreases. The maximum drag reduction can reaches 7.38%.

Aerodynamic Drag Reduction of SUV Based on Underbody Cover Board

2014 ◽  
Vol 602-605 ◽  
pp. 477-480
Author(s):  
Jing Yu Wang ◽  
Bao Yu Wang ◽  
Xing Jun Hu ◽  
Lei Liao
Keyword(s):  
Flow Field ◽  
Drag Reduction ◽  
Drag Coefficient ◽  
Aerodynamic Drag ◽  
Flow Line ◽  
Wind Tunnel Test ◽  
Aerodynamic Performance ◽  
Simulation Based ◽  
Aerodynamic Drag Coefficient ◽  
Aerodynamic Drag Reduction

The principles and method of computational fluid dynamics were applied to numerical simulate the external flow field about the SUV model. The hybrid mesh of tetrahedral and triangular prismatic as well as the turbulence model of Realizable k-ε was adopted to study the flow field of SUV of flat underground. Then the SUV of complex underground was simulated with the same mesh strategy and boundary condition. The aerodynamic drag coefficient of latter was bigger than former. That illuminated the complex underground has affect to aerodynamic performance of vehicle. The wind tunnel test validated the veracity of numerical simulation. Based on that, the underground cover board was appended; the aerodynamic drag coefficient was depressed. The velocity and pressure distribution and flow line were achieved. The conclusions provide theoretical reference for the further study of aerodynamic drag reduction of complex underground.

Numerical Simulation of Influence of Different Deflectors on Aerodynamic Characteristics of the Heavy Duty Truck

2013 ◽  
Vol 365-366 ◽  
pp. 474-477
Author(s):  
Yu Kun Liu ◽  
Qi Fei Li ◽  
Guan Qun Li ◽  
Ao Liu ◽  
Xing Jun Hu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Drag Reduction ◽  
Aerodynamic Drag ◽  
Optimal Solution ◽  
Aerodynamic Characteristics ◽  
Heavy Duty ◽  
Heavy Duty Truck

In order to reduce the aerodynamic drag of heavy-duty truck, four different shape and style of deflectors based on the original one are added. With the method of numerical simulation, the influence of deflector on the flow field of the cab and the vehicle was analyzed, and the mechanism of aerodynamic drag and the measures of drag reduction were discussed in the study. When driving at speed of 30m/s, the aerodynamic drag will be significantly reduced with the contributions of all the four deflectors. The optimal solution can reach a reduction about 14%.

Numerical Analyses to Investigate the Impact of External Sun Visor on Aerodynamic Drag of Heavy-Duty Commercial Truck

2014 ◽  
Vol 602-605 ◽  
pp. 787-790
Author(s):  
Han Bo Yang ◽  
Xing Jun Hu ◽  
Teng Fei Li
Keyword(s):  
Flow Field ◽  
Drag Reduction ◽  
Aerodynamic Drag ◽  
Great Influence ◽  
Heavy Duty ◽  
Local Flow ◽  
Heavy Duty Truck ◽  
Aerodynamic Drag Reduction ◽  
The Impact

Aerodynamic drag is one of the most important sources of the driving resistance suffered by an on-road heavy-duty truck. The previous studies have rarely involved the role of the external sun visor. Therefore, numerical method is used for the research of the influence of six kinds of sun visors differenced by shapes or layouts on the aerodynamic drag reduction. It is demonstrated that the sun visor has a great influence on the local flow field where it is fixed, while a relatively small effect on the global flow field. Moreover, compared to the original one, the CDvalues of each case have different degrees of reduction which illustrates that an appropriate shape and layout of a sun visor benefits the air drag reduction, the largest decline is 4.7%.

A Study of an Active Rear Diffuser Device for Aerodynamic Drag Reduction of Automobiles

2012 ◽  
Author(s):  
Seung-On Kang ◽  
Jun-Ho Cho ◽  
Sang-Ook Jun ◽  
Hoon-Il Park ◽  
Ki-Sun Song ◽  
...  
Keyword(s):  
Drag Reduction ◽  
Aerodynamic Drag ◽  
Aerodynamic Drag Reduction

scholarly journals Bionic shape design of electric locomotive and aerodynamic drag reduction

2018 ◽  
Vol 4 (48) ◽  
pp. 99-109
Author(s):  
Zhenfeng WU ◽  
Yanzhong HUO ◽  
Wangcai DING ◽  
Zihao XIE
Keyword(s):  
Flow Field ◽  
Drag Reduction ◽  
Bluff Body ◽  
Aerodynamic Drag ◽  
Geometric Characteristic ◽  
Shape Design ◽  
Shape Optimisation ◽  
Electric Locomotive ◽  
Geometric Models ◽  
Characteristic Lines

Bionics has been widely used in many fields. Previous studies on the application of bionics in locomotives and vehicles mainly focused on shape optimisation of high-speed trains, but the research on bionic shape design in the electric locomotive field is rare. This study investigated a design method for streamlined electric locomotives according to the principles of bionics. The crocodiles were chosen as the bionic object because of their powerful and streamlined head shape. Firstly, geometric characteristic lines were extracted from the head of a crocodile by analysing the head features. Secondly, according to the actual size requirements of the electric locomotive head, a free-hand sketch of the bionic electric locomotive head was completed by adjusting the position and scale of the geometric characteristic lines. Finally, the non-uniform rational B-splines method was used to establish a 3D digital model of the crocodile bionic electric locomotive, and the main and auxiliary control lines were created. To verify the drag reduction effect of the crocodile bionic electric locomotive, numerical simulations of aerodynamic drag were performed for the crocodile bionic and bluff body electric locomotives at different speeds in open air by using the CFD software, ANSYS FLUENT16.0. The geometric models of crocodile bionic and bluff body electric locomotives were both marshalled with three cars, namely, locomotive + middle car + locomotive, and the size of the two geometric models was uniform. Dimensions and grids of the flow field were defined. And then, according to the principle of motion relativity, boundary conditions of flow field were defined. The results indicated that the crocodile bionic electric locomotive demonstrated a good aerodynamic performance. At the six sampling speeds in the range of 40–240 km/h, the aerodynamic drag coefficient of the crocodile bionic electric locomotive decreased by 7.7% on the average compared with that of the bluff body electric locomotive.

Sign in / Sign up

Export Citation Format

Share Document