Quantitative Analysis of the Influence of Installation Errors on the Contact Pattern of Spiral Bevel Gears

2011 ◽  
Vol 86 ◽  
pp. 278-282
Author(s):  
Guang Lei Liu ◽  
Rui Ting Zhang ◽  
Ning Zhao
Keyword(s):  
Quantitative Analysis ◽  
Tooth Surface ◽  
Test Machine ◽  
Contact Pattern ◽  
Tooth Contact Analysis ◽  
Local Synthesis ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Contact Patterns ◽  
Spiral Bevel

A method—characteristic parameters analysis (CPA) is put forward, which is used for quantitative analysis of contact pattern of spiral bevel gears with installation errors. For forming the tooth surface of spiral bevel gears, local synthesis is used. To imitate rolling test machine, the pinion drive torque is calculated under the indentation depth 0.00635mm. Driven by this torque, the size, shape, location and variation of contact pattern are obtained by loaded tooth contact analysis (LTCA). A pair of aviation spiral bevel gears was taken to quantitatively analyze the various contact patterns under different installation errors. The results indicate that the contact pattern is more sensitive to pinion axis installation error.

Realization of Expected Direction Angle of SGM Spiral Bevel Gears Based on Local Synthesis

2010 ◽  
Vol 37-38 ◽  
pp. 927-933 ◽  
Author(s):  
Guang Lei Liu ◽  
Yue Jun Tian ◽  
Ping Jiang
Keyword(s):  
Objective Function ◽  
Contact Point ◽  
Optimization Method ◽  
Function Optimization ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Local Synthesis ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Spiral Bevel

The authors propose an optimization method based on local synthesis to fulfill the expected contact path (ECP) at mean contact point (M) of spiral bevel gears. The method is a combination of local synthesis, tooth contact analysis (TCA) and application of optimization. Machine-tool settings based on local synthesis are found and contact path (CP) on tooth surface is formed. TCA extracts the information from CP and transforms it to a projected CP (PCP) by rotation in a plane across gear axis. An objective function is established by contrasting ECP to PCP. A program in Matlab language is developed for the simulation of objective function optimization. A spiral bevel gear drive in aviation accessory gear box is used to prove the feasibility of the proposed method. It shows that the method is effective and does not affect transmission errors very much for the realization of ECP.

Kinematical Optimization of Spiral Bevel Gears

1992 ◽  
Author(s):  
Zhang-Hua Fong ◽  
Chung-Biau Tsay
Keyword(s):  
Mathematical Model ◽  
Bevel Gear ◽  
Tooth Surface ◽  
Spiral Bevel Gear ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Contact Patterns ◽  
Spiral Bevel ◽  
Kinematic Errors

Abstract Kinematical optimization and sensitivity analysis of circular-cut spiral bevel gears are investigated in this paper. Based on the Gleason spiral bevel gear generator and EPG test machine, a mathematical model is proposed to simulate the tooth contact conditions of the spiral bevel gear set. All the machine settings and assembly data are simulated by simplified parameters. The tooth contact patterns and kinematic errors are obtained by the proposed mathematical model and the tooth contact analysis techniques. Loaded tooth contact patterns are obtained by the differential geometry and the Hertz contact formulas. Tooth surface sensitivity due to the variation of machine settings is studied. The corrective machine settings can be calculated by the sensitive matrix and the linear regression method. An optimization algorithm is also developed to minimize the kinematic errors and the discontinuity of tooth meshing. According to the proposed studies, an improved procedure for development of spiral bevel gears is suggested. The results of this paper can be applied to determine the sensitivity and precision requirements in manufacturing, and improve the running quality of the spiral bevel gears. Two examples are presented to demonstrate the applications of the optimization model.

scholarly journals Theoretical and Experimental Study on Contact Characteristics of Spiral Bevel Gears under Quasi-Static and Large Loading Conditions

2020 ◽  
Vol 10 (15) ◽  
pp. 5109 ◽  
Author(s):  
Yimeng Fu ◽  
Yaobing Zhuo ◽  
Xiaojun Zhou ◽  
Bowen Wan ◽  
Haoliang Lv ◽  
...  
Keyword(s):  
Finite Element ◽  
Performance Test ◽  
Element Model ◽  
Transmission Error ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Transition Surface ◽  
Spiral Bevel

The precise mathematical model for the tooth surface and transition surface of spiral bevel gears is derived. Taking a pair of spiral bevel gears of a heavy vehicle as an example of calculation and analysis, a finite element model of spiral bevel gears transmission system is established. Through the finite element tooth contact analysis under quasi-static loading and high loading condition, the influences of torque on the root stress distribution, contact stress, and transmission error are discussed, and the results are compared with the empirical formula results. Finally, a contact performance test bench of spiral bevel gear pair is developed, then the root bending stress, contact pattern, and transmission error tests are carried out. These experiment results are compared with analyzed ones, which showed a good agreement.

Manufacture Parameter Design of SMG Spiral Bevel Gears Based on Local Synthesis and Transmission Error Optimization

2010 ◽  
Vol 29-32 ◽  
pp. 2319-2326
Author(s):  
Guang Lei Liu ◽  
Hong Wei Fan ◽  
Ping Jiang
Keyword(s):  
Error Function ◽  
Transmission Error ◽  
Parameter Design ◽  
Optimization Approach ◽  
Tooth Contact Analysis ◽  
Local Synthesis ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Bearing Contact ◽  
Spiral Bevel

An optimization approach for manufacture parameter design of the SGM spiral bevel gears with modified tooth geometry is proposed. The approach is accomplished by application of local synthesis, tooth contact analysis (TCA) and dual-objective optimization of transmission error function. A computer program to obtain a set of manufacture parameters based on the proposed theory is developed and illustrated with an example. The proposed method provides a set of machine-tool settings for pinion NC-grinding which ensures: (i) a localized bearing contact pattern less sensitive to misalignments, (ii) a parabolic transmission error function to reduce vibration and noise in mesh.

Kinematical Optimization of Spiral Bevel Gears

1992 ◽  
Vol 114 (3) ◽  
pp. 498-506 ◽  
Author(s):  
Zhang-Hua Fong ◽  
Chung-Biau Tsay
Keyword(s):  
Mathematical Model ◽  
Bevel Gear ◽  
Tooth Surface ◽  
Spiral Bevel Gear ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Contact Patterns ◽  
Spiral Bevel ◽  
Kinematic Errors

Kinematical optimization and sensitivity analysis of circular-cut spiral bevel gears are investigated in this paper. Based on the Gleason spiral bevel gear generator and EPG test machine, a mathematical model is proposed to simulate the tooth contact conditions of the spiral bevel gear set. All the machine settings and assembly data are simulated by simplified parameters. The tooth contact patterns and kinematic errors are obtained by the proposed mathematical model and the tooth contact analysis techniques. Loaded tooth contact patterns are obtained by the differential geometry and the Hertz contact formulas. Tooth surface sensitivity due to the variation of machine settings is studied. The corrective machine settings can be calculated by the sensitive matrix and the linear regression method. An optimization algorithm is also developed to minimize the kinematic errors and the discontinuity of tooth meshing. According to the proposed studies, an improved procedure for development of spiral bevel gears is suggested. The results of this paper can be applied to determine the sensitivity and precision requirements in manufacturing, and improve the running quality of the spiral bevel gears. Two examples are presented to demonstrate the applications of the optimization model.

Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-Palloid System

2009 ◽  
Author(s):  
Kazumasa Kawasaki ◽  
Isamu Tsuji
Keyword(s):  
Coordinate Measuring Machine ◽  
Tooth Surface ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Form Errors ◽  
Bevel Gears ◽  
Measuring Machine ◽  
Spiral Bevel ◽  
Tooth Flank

The demand of large-sized spiral bevel gears has increased in recent years and hereafter the demand may increase more and more. The large-sized spiral bevel gears with equi-depth teeth are usually manufactured based on Klingelnberg cyclo-palloid system. In this paper, the tooth contact pattern of large-sized spiral bevel gears in this system are investigated analytically and experimentally. First, the tooth contact pattern and transmission errors of such gears are analyzed. The analysis method is based on simultaneous generations of tooth surface and simulations of meshing and contact. Next, the large-sized spiral bevel gears are manufactured and the tooth contact pattern of these gears is investigated experimentally. Moreover, the real tooth surfaces are measured using a coordinate measuring machine and the tooth flank form errors are detected using the measured coordinates. It is possible to analyze the tooth contact patterns of the spiral bevel gears with consideration of the tooth flank form errors expressing the errors as polynomial equations. Finally, the influence of alignment errors due to assembly on the tooth contact pattern is also investigated analytically and experimentally. These analyzed results were compared with experimental ones. As a result, two results showed a good agreement.

scholarly journals Computerized Design of Low-Noise Face-Milled Spiral Bevel Gears

1994 ◽  
Author(s):  
F. L. Litvin ◽  
Yi Zhang ◽  
R. F. Handschuh
Keyword(s):  
Low Noise ◽  
Tooth Surface ◽  
Principal Curvatures ◽  
Surface Geometry ◽  
Local Synthesis ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Gear Drive ◽  
Geometry Design ◽  
Spiral Bevel

Abstract An advanced design methodology is proposed for the face-milled spiral bevel gears with modified tooth surface geometry that provides a reduced level of noise and has a stabilized bearing contact. The approach is based on the local synthesis of the gear drive that provides the “best” machine-tool settings. The theoretical aspects of the local synthesis approach are based on the application of a predesigned parabolic function for absorption of undesirable transmission errors caused by misalignment and the direct relations between principal curvatures and directions for mating surfaces. The meshing and contact of the gear drive is synthesized and analyzed by a computer program. The generation of gears with the proposed geometry design can be accomplished by application of existing equipment. A numerical example that illustrates the proposed theory is presented.

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

2021 ◽  
Author(s):  
GuangLei Liu ◽  
Weidong Yan ◽  
Yao Liu
Keyword(s):  
Contact Analysis ◽  
Tooth Surface ◽  
Surface Boundary ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Gear Drive ◽  
Spiral Bevel ◽  
Manufacturing Parameters

Abstract Real tooth contact analysis of spiral bevel gears is based on the original tooth surface grids (OTSG) formed by coordinate measuring machine (CMM). Since the size of OTSG is smaller than the tooth surface, it is sometimes impossible to get full meshing information. Reverse engineering is a way to solve the problem. The basic idea is to expand OTSG to the tooth surface boundary by reversing the manufacturing parameters of the spiral bevel gear drive. Thus a generalized reversing objective is set up for both of the gear and the pinion, which is the summation of deviations of all nodes between OTSG and corresponding computational tooth surface grids (CTSG) expressed by manufacturing parameters. The gear manufacturing parameters are reversed by observing duplex method. The pinionmanufacturing parameters are reversed by attempting the meshing behavior taken as input to local synthesis with modified roll motion. The initial meshing behavior is approximately ascertained by discrete tooth contact analysis based on OTSG, and meshing behavior at the mean contact point is figured out by interpolation method for function of transmission errors and contact path. Having reversed the manufacturing parameters, OTSG is expanded to the tooth surface boundary and real tooth contact analysis is conducted. A zero bevel gear drive of an aviation engine was employed to demonstrate the validity of the proposed methodology. The proposed method makes the real tooth contact analysis practical and provides prospect to improve meshing behavior more precisely.

Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-palloid System

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Kazumasa Kawasaki ◽  
Isamu Tsuji
Keyword(s):  
Coordinate Measuring Machine ◽  
Tooth Surface ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Form Errors ◽  
Bevel Gears ◽  
Measuring Machine ◽  
Spiral Bevel ◽  
Tooth Flank

Demand for large-sized spiral bevel gears has increased in recent years and a trend expected to continue. The large-sized spiral bevel gears with equi-depth teeth are usually manufactured based on Klingelnberg cyclo-palloid system. In this paper, the tooth contact pattern of large-sized spiral bevel gears in this system are investigated analytically and experimentally. First, the tooth contact pattern and transmission errors of such gears are analyzed. The analysis method is based on simultaneous generations of tooth surface and simulations of meshing and contact. Next, the large-sized spiral bevel gears are manufactured and the tooth contact pattern of these gears is investigated experimentally. Moreover, the real tooth surfaces are measured using a coordinate measuring machine and the tooth flank form errors are detected using the measured coordinates. It is possible to analyze the tooth contact pattern of the spiral bevel gears with consideration of the tooth flank form errors expressing the errors as polynomial equations. Finally, the influence of alignment errors due to assembly on the tooth contact pattern is also investigated analytically and experimentally. These analyzed results were compared with experimental ones. As a result, the two results showed a good agreement.

Sign in / Sign up

Export Citation Format

Share Document