Research on the Process of Concrete Damage under Frost Action

2010 ◽  
Vol 163-167 ◽  
pp. 3406-3410
Author(s):  
Kai Zhi Ma ◽  
Jian Guo Hou ◽  
Ji Yao Jia

This paper summarizes the theories of the concrete damage under frost action. Based on experiments done by researchers in and abroad, the water conversion and the moisture content change in the concrete during the freeze-thaw cycles are analyzed. In this paper, the affection of the expansion and contraction of ice on concrete at temperatures in the usual freeze-thaw test range is particularly taken into consideration. At last, a qualitative process of the concrete damage under frost action is proposed.

2018 ◽  
Vol 10 ◽  
pp. 02030 ◽  
Author(s):  
Karolina Słomka-Polonis ◽  
Bogusława Kordon-Łapczyńska ◽  
Jarosław Frączek

An experimental study was performed to determine the drying characteristics of an oversized fraction of RDF alternative fuel using a laboratory scale hot air dryer at a variety air temperatures and a constant air velocity. For this research the industrial RDF was derived from a Regional Municipal Waste Treatment Facility near the city of Kraków, Poland. The samples of RDF were prepared in two forms: ovesized (unmodified condition) and shreded in a two-drum crusher. In addition, the RDF was sorted into three groups of samples: paper, plastic, textiles. Each form of RDF and each group of samples were dried in hot air dryer at temperatures of 50, 70 i 90 °C and a constant air velocity of 1,5 [m·s-1]. The loss of the the samples mass were measured in a continues manner until the equilibrum moisture content was reached. The effective moisture diffusivity [m2·s-1] and activation energies [kJ·mol-1] was amounted. The analysis of the course of moisture content change concludes that that the drying of the RDF alternative fuel occured mainly in the II period of the process during which the transport of water content was carried out by diffusion. And, to a lesser extent, with the surface heat transfer in II period. Based on the calculated data there was a model determined which presented the best possible matching of the course of moisture content change.


2012 ◽  
Vol 476-478 ◽  
pp. 1889-1892
Author(s):  
Dong Xing ◽  
Min Xu ◽  
Jiang Tao Shi ◽  
Jian Li

Heat treatment is an environmental method of wood modification. The density of Populus ussuriensis, dimensional change and equilibrium moisture content change were tested through the different temperature processing, and get the influence of heat treatment process on the performance of the wood. The results show that heat treatment is an effective way to improve wood dimensional stability and shrinkage properties. With the improvement of heat treatment intensity, the equilibrium balance moisture content of wood will then gradually reduced. When treating temperature reaches 180°C above, the wood drying shrinkage properties greatly decreased, and trend to stable.


2008 ◽  
Vol 12 (2) ◽  
pp. 523-535 ◽  
Author(s):  
M. López-Vicente ◽  
A. Navas ◽  
J. Machín

Abstract. The Mediterranean environment is characterized by strong temporal variations in rainfall volume and intensity, soil moisture and vegetation cover along the year. These factors play a key role on soil erosion. The aim of this work is to identify different erosive periods in function of the temporal changes in rainfall and runoff characteristics (erosivity, maximum intensity and number of erosive events), soil properties (soil erodibility in relation to freeze-thaw processes and soil moisture content) and current tillage practices in a set of agricultural fields in a mountainous area of the Central Pyrenees in NE Spain. To this purpose the rainfall and runoff erosivity (R), the soil erodibility (K) and the cover-management (C) factors of the empirical RUSLE soil loss model were used. The R, K and C factors were calculated at monthly scale. The first erosive period extends from July to October and presents the highest values of erosivity (87.8 MJ mm ha−1 h−1), maximum rainfall intensity (22.3 mm h−1) and monthly soil erosion (0.25 Mg ha−1 month−1) with the minimum values of duration of erosive storms, freeze-thaw cycles, soil moisture content and soil erodibility (0.007 Mg h MJ−1 mm−1). This period includes the harvesting and the plowing tillage practices. The second erosive period has a duration of two months, from May to June, and presents the lowest total and monthly soil losses (0.10 Mg ha−1 month−1) that correspond to the maximum protection of the soil by the crop-cover ($C$ factor = 0.05) due to the maximum stage of the growing season and intermediate values of rainfall and runoff erosivity, maximum rainfall intensity and soil erodibility. The third erosive period extends from November to April and has the minimum values of rainfall erosivity (17.5 MJ mm ha−1 h−1) and maximum rainfall intensity (6.0 mm h−1) with the highest number of freeze-thaw cycles, soil moisture content and soil erodibility (0.021 Mg h MJ−1 mm−1) that explain the high value of monthly soil loss (0.24 Mg ha−1 month−1). The interactions between the rainfall erosivity, soil erodibility, and cover-management factors explain the similar predicted soil losses for the first and the third erosive periods in spite of the strong temporal differences in the values of the three RUSLE factors. The estimated value of annual soil loss with the RUSLE model (3.34 Mg ha−1 yr−1) was lower than the measured value with 137Cs (5.38 Mg ha−1 yr−1) due to the low values of precipitation recorded during the studied period. To optimize agricultural practices and to promote sustainable strategies for the preservation of fragile Mediterranean agrosystems it is necessary to delay plowing till October, especially in dryland agriculture regions. Thus, the protective role of the crop residues will extend until September when the greatest rainfall occurs together with the highest runoff erosivity and soil losses.


Sign in / Sign up

Export Citation Format

Share Document