Natural Characteristics Analysis on Structure of Disc Vibration Dryer

2011 ◽  
Vol 308-310 ◽  
pp. 2398-2403
Author(s):  
Xue Ping Wang ◽  
Zhen Wei Zhang
Keyword(s):  
Dynamic Characteristics ◽  
Vibration System ◽  
Periodic Vibration ◽  
Characteristics Analysis ◽  
Natural Characteristics

In view of the influence of the periodic vibration to the structure of disc vibration dryer, This article analyzes the mode of vibration system of the dryer by using FEA software ANSYS, extracts the first ten order modes and gets the dynamic characteristics on the modes. The analysis of the modes and the characteristics can provide basis for the improvement of this kind of dryer.

Research on Dynamic Characteristics of Gear in Ultrasonic Gear Honing

2011 ◽  
Vol 138-139 ◽  
pp. 687-692
Author(s):  
Yin Zhu She ◽  
Ming Lv ◽  
Shi Ying Wang
Keyword(s):  
Dynamic Characteristics ◽  
Composite Structure ◽  
Theoretical Basis ◽  
Vibration System ◽  
Dynamical Equations ◽  
Machining Quality ◽  
Gear Honing ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

In the machining of ultrasonic gear honing, gear’s dynamic characteristics have a significant impact on the designing of vibration system and machining quality of gear. Since the gear and solid horn produce resonance, it is necessary to give a comprehensive consideration of the interaction between the two. This paper utilized the boundary conditions of the plate and the horn at the connection surface and their own dynamical equations to establish dynamical model of composite structure of the gear and the horn, which providing a theoretical basis for the horn designing and the gear’s dynamic characteristics analysis in ultrasonic gear honing. The results of calculation example are consistent with that of test, it verifies that the proposed analytical method in this paper is feasible.

The Static and Dynamic Characteristics Analysis of a CNC Grinding Machine Bed Made from Artificial Granite

2012 ◽  
Vol 430-432 ◽  
pp. 1568-1572
Author(s):  
Hong Lin Zhao ◽  
Bi Wei Ren ◽  
Yu Mei Huang ◽  
Guang Peng Zhang ◽  
Bo Wang ◽  
...  
Keyword(s):  
Machine Tool ◽  
Dynamic Characteristics ◽  
Static Stiffness ◽  
Static And Dynamic Characteristics ◽  
Cnc Grinding ◽  
Characteristics Analysis ◽  
Grinding Machine ◽  
Cnc Grinding Machine ◽  
Dynamic Characteristics Analysis ◽  
Natural Characteristics

The machine tool bed is an important fundamental unit of the Machine tool, and its static and dynamic characteristics directly influence the precision of the Machine tool’s process. The precise composite B2-K3000 CNC grinding machine bed is made from artificial granite. Through entity modeling, adding the boundary conditions and stress conditions to the bed, this article analyses the static stiffness, natural frequency, vibration mode and harmonic response of the grinding machine bed, and masters the natural characteristics and preponderant natural frequency.On the basic of the bed’s structure characteristics and stiffness requirements, the original bed’s structure gets partial improvements. By increasing the number of ribs and using the cross-shaped ribs, the improved result indicates that the bed’s static stiffness can be enhanced obviously and the bed’s static and dynamic characteristics can be more excellent.

Dynamic Characteristics Analysis of Cable-Rib Tension Deployable Antenna

2016 ◽  
Author(s):  
Liu Ruiwei ◽  
Hongwei Guo ◽  
Zhang Qinghua ◽  
Rongqiang Liu ◽  
Tang Dewei
Keyword(s):  
Dynamic Characteristics ◽  
Structural Parameters ◽  
Element Model ◽  
Structure Design ◽  
Antenna Structure ◽  
Characteristics Analysis ◽  
New Type ◽  
Dynamic Characteristics Analysis ◽  
The Finite Element Model ◽  
Weight Dynamic

Balancing stiffness and weight is of substantial importance for antenna structure design. Conventional fold-rib antennas need sufficient weight to meet stiffness requirements. To address this issue, this paper proposes a new type of cable-rib tension deployable antenna that consists of six radial rib deployment mechanisms, numerous tensioned cables, and a mesh reflective surface. The primary innovation of this study is the application of numerous tensioned cables instead of metal materials to enhance the stiffness of the entire antenna while ensuring relatively less weight. Dynamic characteristics were analyzed to optimize the weight and stiffness of the antenna with the finite element model by subspace method. The first six orders of natural frequencies and corresponding vibration modes of the antenna structure are obtained. In addition, the effects of structural parameters on natural frequency are studied, and a method to improve the rigidity of the deployable antenna structure is proposed.

Dynamic Characteristics Analysis for the Headstock of a Vertical Machining Center

2016 ◽  
Vol 836-837 ◽  
pp. 348-358
Author(s):  
Zhe Li ◽  
Song Zhang ◽  
Yan Chen ◽  
Peng Wang ◽  
Ai Rong Zhang
Keyword(s):  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Vibration Characteristics ◽  
Numerical Control ◽  
Vibration Test ◽  
Machining Accuracy ◽  
Modal Test ◽  
Machining Center ◽  
Characteristics Analysis ◽  
Nc Machine

Dynamic characteristics of numerical control (NC) machine tools, such as natural frequency and vibration property, directly affect machining efficiency and finished surface quality. In general, low-order natural frequencies of critical components have significant influences on machine tool’s performances. The headstock is the most important component of the machine tool. The reliability, cutting stability, and machining accuracy of a machining center largely depend on the structure and dynamic characteristics of the headstock. First, in order to obtain the natural frequencies and vibration characteristics of the headstock of a vertical machining center, modal test and vibration test in free running and cutting conditions were carried out by means of the dynamic signal collection and analysis system. According to the modal test, the first six natural frequencies of the headstock were obtained, which can not only guide the working speed, but also act as the reference of structural optimization aiming at frequency-shift. Secondly, by means of the vibration test, the vibration characteristics of the headstock were obtained and the main vibration sources were found out. Finally the corresponding vibration reduction plans were proposed in this paper. That provides the reference for improving the performance of the overall unit.

Static and Dynamic Characteristics Analysis of Precise Composite CNC Grinding Machine

2011 ◽  
Vol 411 ◽  
pp. 88-93
Author(s):  
Hong Lin Zhao ◽  
Yun Fei Sun ◽  
Rui Chen ◽  
Yu Mei Huang ◽  
Guang Peng Zhang ◽  
...  
Keyword(s):  
Finite Element ◽  
Dynamic Characteristics ◽  
Element Model ◽  
Machine Model ◽  
Static And Dynamic Characteristics ◽  
Cnc Grinding ◽  
Characteristics Analysis ◽  
The Subject ◽  
Grinding Machine ◽  
Cnc Grinding Machine

The parameters of joint parts must be included in the finite element model of a whole grinding machine. The subject investigated in this paper is B2-K3000 high-precision composite flexible grinding machine. Through finite element modeling, the joint part parameters are integrated into the whole grinding machine model to establish a dynamic model and then analyze its static and dynamic characteristics. The result shows that the whole grinding machine possesses good features, but it still needs to be improved. This paper gives suggestions for its structure development and application.

Sign in / Sign up

Export Citation Format

Share Document