Heat Treatment Effect on Pitting Corrosion of Super Duplex Stainless Steel UNS S32750 GTA Welds

2013 ◽  
Vol 746 ◽  
pp. 467-472 ◽  
Author(s):  
In June Moon ◽  
Bok Su Jang ◽  
Jin Hyun Koh
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Super Duplex Stainless Steel ◽  
Σ Phase ◽  
Gas Tungsten Arc ◽  
Weld Metals ◽  
Pitting Corrosion Resistance ◽  
Heat Treated

The purpose of this study was to investigate the effect of heat treatment (930°C, 1080°C, 1230°C) followed by quenching on the pitting corrosion resistance, sigma phase precipitation, and microstructural change of a super duplex stainless steel (UNS S32750) welds made by gas tungsten arc (GTA). Based on the microstructural examination, the σ phase was formed in welds heat treated at 930°C while there were little σ phases formed in welds experienced the relatively fast cooling from 1080°C and 1230°C. Accordingly, the most weight loss due to pitting corrosion occurred in the as received base and weld metals heat treated at 930°C. It was confirmed that the pitting corrosion occurred in the phase boundaries of ferrite/sigma and austenite/sigma.

Influence of Sigma Phase Precipitation on Pitting Corrosion of 2507 Super-Duplex Stainless Steel

2010 ◽  
Vol 658 ◽  
pp. 380-383 ◽  
Author(s):  
Ying Han ◽  
De Ning Zou ◽  
Wei Zhang ◽  
Jun Hui Yu ◽  
Yuan Yuan Qiao
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Ambient Temperature ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Super Duplex Stainless Steel ◽  
Phase Precipitation ◽  
Pitting Potential ◽  
Σ Phase ◽  
Pitting Corrosion Resistance

Specimens of 2507 super-duplex stainless steel aging at 850°C for 5 min, 15 min and 60 min were investigated to evaluate the pitting corrosion resistance in 3.5% NaCl solution at 30°C and 50°C. The results are correlated with the microstructures obtained with different aging time. The precipitation of σ phase remarkably decreases the pitting corrosion resistance of the steel and the specimen aged for 60 min presents the lowest pitting potential at both 30°C and 50°C. With increasing the ambient temperature from 30°C to 50°C, the pitting potential exhibits a reduction tendency, while this tendency is less obviously in enhancing the ambient temperature than in extending the isothermal aging duration from 5 to 60 min. SEM analysis shows that the surrounding regions of σ phase are the preferable sites for the formation of corrosion pits which grew up subsequently. This may be attributed to the lower content of corrosion resistance elements in these regions formatted with σ phase precipitation.

scholarly journals Pitting Corrosion Resistance on Annealing Treated Super Duplex Stainless Steel S32750

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 294
Author(s):  
Shuang Liu ◽  
Chaohua Yue ◽  
Xi Chen ◽  
Qiuhua Zhu ◽  
Yiyou Tu
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Annealing Temperature ◽  
Super Duplex Stainless Steel ◽  
Boundary Area ◽  
Pitting Potential ◽  
Pitting Corrosion Resistance ◽  
Equivalent Number

The pitting corrosion resistance of S32750 super duplex stainless steel, annealing treated at temperatures of 950–1200 °C for 20–60 min, was investigated using potentiodynamic polarization tests. The results show that the volume fractions of ferrite in the S32750 duplex stainless steel increased from 48.9% to 68.4% as annealing temperatures increased from 950 to 1200 °C. The pitting potential of the sample increased first and then decreased from an annealing temperature of 950 to 1050 °C, and the highest pitting potential was observed after annealing at 1050 °C for 35 min. The pitting corrosion resistance of S32750 stainless steel is due to the combination of pitting resistance equivalent number (PREN) value, phase fraction and grain boundary area fraction, and the imbalance of corrosion potential.

scholarly journals Localised corrosion of super duplex stainless steel in synthetic NaOH-Na2S solution at different temperatures

2021 ◽  
Author(s):  
Carlos Eduardo Rondón-Almeyda ◽  
Lina María Sierra-Serrano ◽  
Mauricio Rincón-Ortiz
Keyword(s):  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Paper Industry ◽  
Pulp And Paper Industry ◽  
Corrosion Mechanism ◽  
Super Duplex Stainless Steel ◽  
Pitting Corrosion Resistance ◽  
Different Temperatures ◽  
Potentiodynamic Polarisation

The pitting corrosion resistance of the UNS S-32760 super duplex stainless steel (SDSS) in synthetic NaOH-Na2S solution at different working temperatures of 25, 50, and 70°C has been evaluated in the current investigation to assess the alloy behaviour under the caustic environments used in the pulp and paper industry. The temperature effect on pitting (Ep) and repassivation (Erp) potentials was studied with the Cyclic Potentiodynamic Polarisation (CPP) technique according to the ASTM G61. Results demonstrated that pitting corrosion is prone to occur when increasing alloy temperature since both pitting and repassivation potentials lean towards more negative values while the repassivation zone is reduced. Furthermore, the morphology of the found pits was determined using Scanning Electron Microscopy (SEM). The pitting corrosion mechanism for the studied super duplex stainless steel under the exposed conditions was introduced. The thiosulphate ion is attributed to be responsible for the initiation of the localised corrosion.

Sign in / Sign up

Export Citation Format

Share Document