Natural Fiber Reinforced Synthetic Polymer Composites

2019 ◽  
Vol 23 ◽  
pp. 6-30
Author(s):  
Volkan Uğraşkan ◽  
Abdullah Toraman ◽  
A. Binnaz Hazar Yoruç
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Thermal And Mechanical Properties ◽  
Fiber Reinforced ◽  
Promising Alternative ◽  
Alternative Sources

In early composite materials, the use of petroleum based fibers such as glass and carbon fibers, aramid etc. was common. In order to reduce the dependency on petroleum based sources and environmental pollution, researchers have focused on the search for alternative sources. Natural fibers are abundant, recyclable and biodegradable plant derived materials. Besides, thanks to good physical, thermal and mechanical properties, natural fibers become promising alternative for composites. This review includes information about natural fiber reinforced composites’ components, manufacturing methods, mechanical properties and applications.

Surface treatments of plant fibers and their effects on mechanical properties of fiber-reinforced composites: A review

2018 ◽  
Vol 38 (1) ◽  
pp. 15-30 ◽  
Author(s):  
Rashid Latif ◽  
Saif Wakeel ◽  
Noor Zaman Khan ◽  
Arshad Noor Siddiquee ◽  
Shyam Lal Verma ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Physical And Mechanical Properties ◽  
Surface Treatments ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Plant Fibers ◽  
Specific Strength

The need of natural fiber-reinforced composites is increasing at very fast rate because of their ecofriendly production, decomposition, high specific strength, abundance, good physical and mechanical properties. Available literature reveals that past researchers have done a lot of work for the preparation and characterization of fiber-reinforced composites. While developing natural fiber composites, researchers encountered various problems like hydrophilic nature of natural fibers, incompatibility of natural fibers with matrix materials, thermal instability of natural fibers, and poor interfacial bonding between reinforcing phase and matrix phase. However, some of these problems can be solved to a greater extent by considering surface treatment of natural fibers before they are used in the preparation of fiber-reinforced composites. Thus, there is a need for understanding the effect of several surface treatments on the mechanical properties of fiber-reinforced composites. The aim of this paper is to put forth a comprehensive review on the effects of different surface treatments on the mechanical properties such as tensile strength, flexural strength, and impact strength and also interfacial shear strength of the fiber-reinforced composites.

Microstructures and Mechanical Properties of Natural Fibers

2008 ◽  
Vol 33-37 ◽  
pp. 553-558 ◽  
Author(s):  
Yan Li ◽  
Yan Ping Hu ◽  
Chun Jing Hu ◽  
Ye Hong Yu
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Specific Strength ◽  
Mechanical Performances ◽  
Set Up

Natural fibers are excellent substitute materials for man made fibers in making fiber reinforced composites due to their high specific strength and modulus, low density, low price, easy availability in some countries, recyclable and degradable properties. They have raised great attentions among material scientists and engineers in the past decade. Many researches have been conducted to study the mechanical properties, especially interfacial properties of natural fiber reinforced composites. However, the properties, such as mechanical performances, moisture absorption behaviors, et. al of natural fibers themselves have been seldom investigated. Knowing the relationship between microstructures and properties of natural fibers are important for understanding the bulk properties of natural fiber composites and also good instructions for designing bio-mimic materials. In this study, four kinds of natural fibers which were extracted from different plant sources were investigated. The microstructures of these natural fibers were revealed with the aid of optical microscopy. Microstructure models were thereof set up and mechanical properties for the representative volume element were assumed. Fiber bundle fracture models together with probability statistics analysis were employed to calculate the mechanical properties of natural fibers. The results were compared with the experimental measurements. Different mechanical behaviors of natural fibers which were functioned differently in the nature were clearly explained by the above studies

Information in United States Patents on works related to ‘Natural Fibers’: 2000-2018

2019 ◽  
Vol 12 (1) ◽  
pp. 4-76 ◽  
Author(s):  
Krittirash Yorseng ◽  
Mavinkere R. Sanjay ◽  
Jiratti Tengsuthiwat ◽  
Harikrishnan Pulikkalparambil ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
United States ◽  
Composite Materials ◽  
Natural Fiber ◽  
Comprehensive Evaluation ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Macro Scale ◽  
Structural Applications

Background: This era has seen outstanding achievements in materials science through the advances in natural fiber-based composites. The new environmentally friendly and sustainability concerns have imposed the chemists, biologists, researchers, engineers, and scientists to discover the engineering and structural applications of natural fiber reinforced composites. Objective: To present a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials. Methods: The patent data have been taken from the external links of US patents such as IFI CLAIMS Patent Services, USPTO, USPTO Assignment, Espacenet, Global Dossier, and Discuss. Results: The present world scenario demands the usage of natural fibers from agricultural and forest byproducts as a reinforcement material for fiber reinforced composites. Natural fibers can be easily extracted from plants and animals. Recently natural fiber in nanoscale is preferred over micro and macro scale fibers due to its superior thermo-mechanical properties. However, the choice of macro, micro, and nanofibers depends on their applications. Conclusion: This document presents a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials.

Buckling analysis of natural fiber reinforced composites

2021 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Celal Çakıroğlu ◽  
Gebrail Bekdaş
Keyword(s):  
Composite Plate ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Experimental Studies ◽  
Fiber Reinforced Composites ◽  
Fiber Types ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Element Analysis

In the recent years natural fiber reinforced composites are increasingly receiving attention from the researchers and engineers due to their mechanical properties comparable to the conventional synthetic fibers and due to their ease of preparation, low cost and density, eco-friendliness and bio-degradability. Natural fibers such as kenaf or flux are being considered as a viable replacement for glass, aramid or carbon. Extensive experimental studies have been carried out to determine the mechanical behavior of different natural fiber types such as the elastic modulus, tensile strength, flexural strength and the Poisson’s ratio. This paper presents a review of the various experimental studies in the field of fiber reinforced composites while summarizing the research outcome about the elastic properties of the major types of natural fiber reinforced composites. Furthermore, the performance of a kenaf reinforced composite plate is demonstrated using finite element analysis and results are compared to a glass fiber reinforced laminated composite plate.

Machining parametric study on the natural fiber reinforced composites: A review

2021 ◽  
pp. 095440622110637
Author(s):  
Vijay Kumar Mahakur ◽  
Sumit Bhowmik ◽  
Promod Kumar Patowari
Keyword(s):  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Machining Processes ◽  
Industrial Sectors ◽  
The Matrix ◽  
Input Variables

Nowadays, the utilization of natural fiber reinforced composite has increased frequently. These natural fibers have significant features like low cost, renewable, and, more importantly, biodegradable in nature, making them to be utilized for various industrial sectors. However, the massive demand for natural fiber reinforced composites (NFRC), forces them to be machined and operated, which is required for countless areas in multiple industries like automotive, marine, aerospace and constructions. But before obtaining the final shape of any specimen, this specimen should come across numerous machining processes to get the desired shape and structure. Therefore, the present review paper focused on the various aspects during conventional and unconventional machining of the NFRC. It covers the work by exploring the influence of all input variables on the outcome produced after machining the NFRC. Various methodologies and tools are also discussed in this article for reducing the machining defects. The machining of the NFRC is found as a challenging task due to insufficient interlocking between the matrix and fibers, and minimum knowledge in machining characteristics and appropriate input parameters. Thus, this review is trying to assist the readers to grasp a basic understanding and information during the machining of the NFRC in every aspect.

scholarly journals Efficient Hydrophobic Modification of Old Newspaper and Its Application in Paper Fiber Reinforced Composites

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 842 ◽  
Author(s):  
Weiwei Zhang ◽  
Jin Gu ◽  
Dengyun Tu ◽  
Litao Guan ◽  
Chuanshuang Hu
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Natural Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Oh Groups ◽  
Uniform Dispersion ◽  
The Matrix ◽  
Paper Fibers

Paper fibers have gained broad attention in natural fiber reinforced composites in recent years. The specific problem in preparing paper fiber reinforced composites is that paper fibers easily become flocculent after pulverization, which increases difficulties during melt-compounding with polymer matrix and results in non-uniform dispersion of paper fibers in the matrix. In this study, old newspaper (ONP) was treated with a low dosage of gaseous methyltrichlorosilane (MTCS) to solve the flocculation. The modified ONP fibers were characterized by Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Thermogravimetric Analysis (TG). Then the modified ONP fibers and high-density polyethylene (HDPE) were extruded and pelletized to prepare ONP/HDPE composites via injection molding. Maleic anhydride-grafted polyethylene (MAPE) was added to enhance the interfacial bonding performance with the ultimate purpose of improving the mechanical strength of the composites. The mechanical properties such as tensile, flexural, and impact strength and the water absorption properties of the composite were tested. The results showed that the formation of hydrogen bonding between ONP fibers was effectively prevented after MTCS treatment due to the reduction of exposed –OH groups at the fiber surface. Excessive dosage of MTCS led to severe fiber degradation and dramatically reduced the aspect ratio of ONP fibers. Composites prepared with ONP fibers modified with 4% (v/w) MTCS showed the best mechanical properties due to reduced polarity between the fibers and the matrix, and the relatively long aspect ratio of treated ONP fibers. The composite with or without MAPE showed satisfactory water resistance properties. MTCS was proven to be a cheap and efficient way to pretreat old newspaper for preparing paper fiber reinforced composites.

Sign in / Sign up

Export Citation Format

Share Document