Principle and Simulation Study on Multi Point-Single Point Incremental Combined Forming for Sheet Metal

2009 ◽  
Vol 626-627 ◽  
pp. 273-278 ◽  
Author(s):  
X.J. Li ◽  
Ming Zhe Li ◽  
C.G. Liu ◽  
Zhong Yr Cai
Keyword(s):  
Sheet Metal ◽  
Single Point ◽  
Experimental Result ◽  
Work Piece ◽  
The Novel ◽  
Forming Process ◽  
Explicit Finite Element ◽  
Forming Defect ◽  
Forming Technology ◽  
Elastic Cushion

Based on Multi-Point (MP) forming technology and Single-Point Incremental (SPI) forming technology, MP-SPI combined forming method for sheet metal is proposed, the principle and two different forming techniques are illustrated firstly. Then the paper is focused on numerical analysis for the novel forming technique with explicit Finite Element (FE) algorithm. During simulation of spherical work-piece, dimpling occurs as a main forming defect in MP-SPI combined forming process. Simulation results show that the dimpling defect can be suppressed effectively by using elastic cushion. An appropriate thickness of elastic cushion is necessary to prevent dimpling. And also the deformation of the work-piece is sensitive to the shape of elastic cushion. The combined forming test shows that the numerical simulation result is closed to the experimental result.

Economical and Ecological Aspects of Single Point Incremental Forming Versus Deep Drawing Technology

2007 ◽  
Vol 344 ◽  
pp. 931-938 ◽  
Author(s):  
Aleš Petek ◽  
Gašper Gantar ◽  
Tomaz Pepelnjak ◽  
Karl Kuzman
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Deep Drawing ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Forming Technology ◽  
Ecological Aspects

In contemporary industrial production the ecological aspects have increasingly important role in selection of sheet metal forming process. To produce sheet metal parts with minimal environmental burdening the shortening of forming processes including the procedures for production of appurtenant forming tools as well as decrease use of lubricant is prerequisite. The ecological aspects have to be considered also already in developmental phase where the forming technology is evaluated in digital environment with FEM simulations. In addition, particularly in small and medium batch production the geometrically complex parts are difficult to form economically with conventional forming processes like deep drawing or stretching. Therefore, new concepts like hydro-mechanical forming or incremental sheet metal forming were developed. In order to select the optimal forming process the production costs as well as the environmental aspects like lubrication, noise, pollution and energy per produced part have to be considered. The paper is focused towards the comparison of conventional deep drawing (DD) process aimed for forming the pyramid-shaped part with single point incremental forming technology (SPIF). The economical and ecological aspects affecting the successful forming by both concepts are determined. Comparative evaluation was established in order to present advantages and drawbacks of each analysed technology.

scholarly journals Comparison of Computer Extended Descriptive Geometry (CeDG) with CAD in the Modeling of Sheet Metal Patterns

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 685
Author(s):  
Manuel Prado-Velasco ◽  
Rafael Ortiz-Marín
Keyword(s):  
Sheet Metal ◽  
Computer Aided Design ◽  
Parametric Modeling ◽  
Descriptive Geometry ◽  
The Novel ◽  
Forming Process ◽  
Solid Models ◽  
Design Software ◽  
Solid Edge ◽  
Aided Design

The emergence of computer-aided design (CAD) has propelled the evolution of the sheet metal engineering field. Sheet metal design software tools include parameters associated to the part’s forming process during the pattern drawing calculation. Current methods avoid the calculation of a first pattern drawing of the flattened part’s neutral surface, independent of the forming process, leading to several methodological limitations. The study evaluates the reliability of the Computer Extended Descriptive Geometry (CeDG) approach to surpass those limitations. Three study cases that cover a significative range of sheet metal systems are defined and the associated solid models and patterns’ drawings are computed through Geogebra-based CeDG and two selected CAD tools (Solid Edge 2020, LogiTRACE v14), with the aim of comparing their reliability and accuracy. Our results pointed to several methodological lacks in LogiTRACE and Solid Edge that prevented to solve properly several study cases. In opposition, the novel CeDG approach for the computer parametric modeling of 3D geometric systems overcame those limitations so that all models could be built and flattened with accuracy and without methodological limitations. As additional conclusion, the success of CeDG suggests the necessity to recover the relevance of descriptive geometry as a key core in graphic engineering.

Flexible Stretch Forming Technology for Sheet Metal Based on Discrete-Gripper and Multi-Point Die

2014 ◽  
Vol 556-562 ◽  
pp. 460-463 ◽  
Author(s):  
Xue Chen ◽  
Ming Zhe Li ◽  
Wen Hua Liu ◽  
Zhi Qiang Hou
Keyword(s):  
Sheet Metal ◽  
Experimental Results ◽  
Shape Error ◽  
Stretch Forming ◽  
Forming Process ◽  
Structural Composition ◽  
Forming Technology ◽  
Working Principle ◽  
Material Utilization

To solve the problem of low material utilization in traditional stretch forming process, a flexible stretch forming method was proposed, which can be realized by interaction of the multi-point stretch forming die with discrete-gripper stretch forming machine. The principle and characteristics of sheet metal flexible stretch forming technology was introduced, structural composition and working principle of the multi-point stretch forming die and discrete-gripper stretch forming machine were expounded, and the technology experiments was carried out with a self-designed flexible stretch forming technology equipment for sheet metal. The experimental results indicate that structure of multi-point stretch forming die and discrete-gripper stretch forming machine are reasonable, and flexible stretch forming technology can be realized by above-mentioned die and machine, stretch forming parts has a good quality and its shape error can satisfy requirements of production.

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

2018 ◽  
Vol 783 ◽  
pp. 148-153
Author(s):  
Muhammad Sajjad ◽  
Jithin Ambarayil Joy ◽  
Dong Won Jung
Keyword(s):  
Mechanical Properties ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Machining Process ◽  
Machining Parameters ◽  
Forming Process ◽  
Element Analysis ◽  
Tool Diameter

Incremental sheet metal forming, is a non-conventional machining process which offers higher formability, flexibility and low cost of production than the traditional conventional forming process. Punch or tool used in this forming process consecutively forces the sheet to deform locally and ultimately gives the target profile. Various machining parameters, such as type of tool, tool path, tool size, feed rate and mechanical properties of sheet metal, like strength co-efficient, strain hardening index and ultimate tensile strength, effects the forming process and the formability of final product. In this research paper, Single Point Incremental Forming was simulated using Dassault system’s Abaqus 6.12-1 and results are obtained. Results of sheet profile and there change in thickness is investigated. For this paper, we simulated the process in abaqus. The tool diameter and rotational speed is find out for the production of parts through incremental forming. The simulation is done for two type of material with different mechanical properties. Various research papers were used to understand the process of incremental forming and its simulation.

scholarly journals Common defects of parts manufactured through single point incremental forming

2021 ◽  
Vol 343 ◽  
pp. 04007
Author(s):  
Mihai Popp ◽  
Gabriela Rusu ◽  
Sever-Gabriel Racz ◽  
Valentin Oleksik
Keyword(s):  
Sheet Metal ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Metal Forming Process ◽  
Serial Robot ◽  
The Many ◽  
Cold Metal

Single point incremental forming is one of the most intensely researched die-less manufacturing process. This process implies the usage of a CNC equipment or a serial robot which deforms a sheet metal with the help of a relatively simple tool that follows an imposed toolpath. As every cold metal forming process, besides the many given advantages it has also some drawbacks. One big drawback in comparison with other cold metal forming processes is the low accuracy of the deformed parts. The aim of this research is to investigate the sheet metal bending mechanism through finite element method analysis. The results shows that the shape of the retaining rings has a big influence over the final geometrical accuracy of the parts manufactured through single point incremental forming.

scholarly journals A recommendation of computation of normal streeses in single point incremental forming technology

2014 ◽  
Vol 17 (1) ◽  
pp. 21-28
Author(s):  
Dien Khanh Le ◽  
Nam Thanh Nguyen ◽  
Binh Thien Nguyen
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Finite Element Method Simulation ◽  
Recent Decade ◽  
Work Piece ◽  
Single Point Incremental Forming ◽  
Forming Technology ◽  
Element Method

Single Point Incremental Forming (SPIF) has become popular for metal sheet forming technology in industry in many advanced countries. In the recent decade, there were lots of related studies that have concentrated on this new technology by Finite Element Method as well as by empirical practice. There have had very rare studies by pure analytical theory and almost all these researches were based on the formula of ISEKI. However, we consider that this formula does not reflect yet the mechanics of destruction of the sheet work piece as well as the behavior of the sheet in reality. The main aim of this paper is to examine ISEKI’s formula and to suggest a new analytical computation of three elements of stresses at any random point on the sheet work piece. The suggested formula is carefully verified by the results of Finite Element Method simulation.

A Study on Using Cover Blank in Single Point Incremental Forming Process by Finite Element Analysis

2015 ◽  
Vol 809-810 ◽  
pp. 277-282
Author(s):  
Khalil Ibrahim Abass
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Sheet Material ◽  
Single Point ◽  
Complex Nature ◽  
Work Piece ◽  
Process Conditions ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Highly Nonlinear

The Single Point Incremental Forming Process (SPIF) is a forming technique of sheet material based on layered manufacturing principles. The forming tool is moved along the tool path while the edges of sheet material are clamped. The finished part is manufactured by the CNC machine. SPIF involves extensive plastic deformation and the description of the process is more complicated by highly nonlinear boundary conditions, namely contact and frictional effects have been accomplished. However, due to the complex nature of these models, numerical approaches dominated by the FEA are now in widespread use. The paper presents the data and main results of a study on effect of using cover blank in SPIF through FEA. The considered SPIF has been studied under certain process conditions referring to the test work piece, tool, etc., applying ANSYS 11.0. The results show that the simulation model can predict an ideal profile of processing track, spring back error of SPIF, the behavior of contact tool-work piece, the product accuracy by evaluation its thickness and strain distributions, the contact status and chattering among surface interface tool-work piece.

Channel Mill’s Top Shell Prototyping with the Single Point Incremental Forming Technology of Sheet Metal

2011 ◽  
Vol 120 ◽  
pp. 94-101
Author(s):  
Gang Liu
Keyword(s):  
Sheet Metal ◽  
Incremental Forming ◽  
Single Point ◽  
Business Case ◽  
Single Point Incremental Forming ◽  
Forming Technology ◽  
Shell Design ◽  
Top Shell

First of all, the theory and application of the Single Point Incremental Forming (SPIF) technology of sheet metal are introduced at the beginning of this paper; second, several traditional forming technologies of channel mill’s top shell are compared; third, The advantages of SPIF Technology of Sheet Metal in channel mill’s top shell prototyping are analyzed; finally, the steps and methods of channel mill’s top shell design and prototyping with SPIF technology are elaborated through a real business case.

Experimental Study on Residual Formability of Single Point Incrementally Formed Part

2019 ◽  
Author(s):  
Chetan P. Nikhare
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Single Point ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Conventional Process

Abstract A substantial increase in demand on the sheet metal part usage in aerospace and automotive industries is due to the increase in the sale of these products to ease the transportation. However, due to the increase in fuel prices and further environmental regulation had left no choice but to manufacture more fuel efficient and inexpensive vehicles. These heavy demands force researchers to think outside the box. Many innovative research projects came to replace the conventional sheet metal forming of which single point incremental forming is one of them. SPIF is the emerging die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any processing time to undergo plastic deformation. It has several advantages over the conventional process like high process flexibility, elimination of die, complex shape and better formability. Previous literature provides enormous research on formability of metal during this process, process with various metals and hybrid metals, the influence of various process parameter, but residual formability after this process is untouched. Thus, the aim of this paper is to investigate the residual formability of the formed parts using single point incremental forming and then restrike with a conventional tool. The common process parameters of single point incremental forming were varied, and residual formability was studied through the conventional process. The strain and thickness distribution were measured and analyzed. In addition, the forming limit of the part was plotted and compared.

Study on the Surface Quality of Fender NC Incremental Forming

2011 ◽  
Vol 335-336 ◽  
pp. 523-526
Author(s):  
Liu Ru Zhou
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Process Time ◽  
Forming Process ◽  
Forming Technology ◽  
Starting Point ◽  
Incremental Sheet Metal Forming ◽  
Metal Deformation ◽  
Improvement Method

The NC incremental sheet metal forming technology is a flexible forming technology without dedicated forming dies. The forming locus of the forming tool can be adjusted by correcting the numerical model of the product. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation, the deformed region of sheet metal thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The principle of NC incremental sheet metal forming and the forming process of the fender are introduced. The effect of process parameters on forming is analysed. The improvement method of the forming quality is suggested. The groove is created in the starting point of tool moving when the starting point of tool moving locus at all layers is identical. The groove can be eliminated when the starting point of tool moving locus at all layers is different. The feed pitch p increase, the process time decrease, production rate and surface degree of roughness increase. In general, the feed pitch is 0.25mm.

Sign in / Sign up

Export Citation Format

Share Document