scholarly journals MEMRECS—A Sustainable View for Metal Recycling from Waste Printed Circuit Boards

2013 ◽  
Vol 04 (08) ◽  
pp. 803-810 ◽  
Author(s):  
Hoang-Long Le ◽  
Eiji Yamasue ◽  
Hideyuki Okumura ◽  
Keiichi N. Ishihara
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Metal Recycling

Liquid-liquid hierarchical separation and metal recycling of waste printed circuit boards

2019 ◽  
Vol 364 ◽  
pp. 388-395 ◽  
Author(s):  
Bin Chen ◽  
Jie He ◽  
Yaoyao Xi ◽  
Xiangfeng Zeng ◽  
Ivan Kaban ◽  
...  
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Metal Recycling

scholarly journals Evaluation of US EPA Method 3052 Microwave Acid Digestion for Quantification of Majority Metals in Waste Printed Circuit Boards

Metals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1511
Author(s):  
Dagmar Remeteiová ◽  
Silvia Ružičková ◽  
Vladislava Mičková ◽  
Martina Laubertová ◽  
Róberta Slezáková
Keyword(s):  
Environmental Protection Agency ◽  
Metal Content ◽  
Printed Circuit Boards ◽  
Standard Procedure ◽  
Circuit Boards ◽  
Acid Digestion ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Metal Recycling ◽  
Us Epa

Metal content determination is one of the critical aspects of preparing electronic waste for metal recycling. In spite of the fact that end-of-life printed circuit boards are considered to be a secondary resource reservoir, no standard procedure exists for determining the total metal content in this heterogeneous multicomponent material containing plastics, metals, alloys and ceramics. We investigated the utilization of United States Environmental Protection Agency (US EPA) microwave acid digestion (Method 3052) and various modifications of this procedure for effective releasing of Cu, Fe, Ni, Pb and Zn from waste printed circuit boards (WPCBs) from mobile phones. The maximum contents of Cu (22.6 wt.%), Fe (5.0 wt.%), Ni (2.0 wt.%) and Zn (2.6 wt.%) were obtained using the standard (unmodified) US EPA 3052 digestion procedure, but the total digestion of PCB material was not achieved. The solid residue material after digestion by means of the US EPA 3052 method consisted predominantly of oxides (Ca, Mg and Al) and fluorides (Ca and Mg), and some particles contained minor amounts of Fe and Cu.

LEACHING OF METALS FROM WASTE PRINTED CIRCUIT BOARDS (WPCBs) USING SULFURIC AND NITRIC ACIDS

2014 ◽  
Vol 13 (10) ◽  
pp. 2601-2607 ◽  
Author(s):  
Jae-chun Lee ◽  
Manoj Kumar ◽  
Min-Seuk Kim ◽  
Jinki Jeong ◽  
Kyoungkeun Yoo
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards

scholarly journals Effective Recovery Process of Copper from Waste Printed Circuit Boards Utilizing Recycling of Leachate

JOM ◽  
2020 ◽  
Author(s):  
Joona Rajahalme ◽  
Siiri Perämäki ◽  
Roshan Budhathoki ◽  
Ari Väisänen
Keyword(s):  
Hydrogen Peroxide ◽  
Sulfuric Acid ◽  
Printed Circuit Boards ◽  
Sulfuric Acid Concentration ◽  
Recovery Process ◽  
Copper Recovery ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Acid Consumption

AbstractThis study presents an optimized leaching and electrowinning process for the recovery of copper from waste printed circuit boards including studies of chemical consumption and recirculation of leachate. Optimization of leaching was performed using response surface methodology in diluted sulfuric acid and hydrogen peroxide media. Optimum leaching conditions for copper were found by using 3.6 mol L−1 sulfuric acid, 6 vol.% hydrogen peroxide, pulp density of 75 g L−1 with 186 min leaching time at 20°C resulting in complete leaching of copper followed by over 92% recovery and purity of 99.9% in the electrowinning. Study of chemical consumption showed total decomposition of hydrogen peroxide during leaching, while changes in sulfuric acid concentration were minor. During recirculation of the leachate with up to 5 cycles, copper recovery and product purity remained at high levels while acid consumption was reduced by 60%.

scholarly journals Food Waste-Assisted Metal Extraction from Printed Circuit Boards: The Aspergillus niger Route

2021 ◽  
Vol 9 (5) ◽  
pp. 895
Author(s):  
Carlotta Alias ◽  
Daniela Bulgari ◽  
Fabjola Bilo ◽  
Laura Borgese ◽  
Alessandra Gianoncelli ◽  
...  
Keyword(s):  
Solid State ◽  
Aspergillus Niger ◽  
Food Waste ◽  
Solid State Fermentation ◽  
Printed Circuit Boards ◽  
Electronic Waste ◽  
Metal Extraction ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards

A low-energy paradigm was adopted for sustainable, affordable, and effective urban waste valorization. Here a new, eco-designed, solid-state fermentation process is presented to obtain some useful bio-products by recycling of different wastes. Urban food waste and scraps from trimmings were used as a substrate for the production of citric acid (CA) by solid state fermentation of Aspergillus niger NRRL 334, with a yield of 20.50 mg of CA per gram of substrate. The acid solution was used to extract metals from waste printed circuit boards (WPCBs), one of the most common electronic waste. The leaching activity of the biological solution is comparable to a commercial CA one. Sn and Fe were the most leached metals (404.09 and 67.99 mg/L, respectively), followed by Ni and Zn (4.55 and 1.92 mg/L) without any pre-treatments as usually performed. Commercial CA extracted Fe more efficiently than the organic one (123.46 vs. 67.99 mg/L); vice versa, biological organic CA recovered Ni better than commercial CA (4.55 vs. 1.54 mg/L). This is the first approach that allows the extraction of metals from WPCBs through CA produced by A. niger directly grown on waste material without any sugar supplement. This “green” process could be an alternative for the recovery of valuable metals such as Fe, Pb, and Ni from electronic waste.

Physical pre-concentration and ammonium leaching of metal copper from waste printed circuit boards

2021 ◽  
pp. 128512
Author(s):  
Shun-xiang Shi ◽  
Chun-chen Nie ◽  
Hong-hao Chang ◽  
Peng Wu ◽  
Zheng-jie Piao ◽  
...  
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards
Sign in / Sign up

Export Citation Format

Share Document