An investigation has been conducted on the corrosion inhibition of mild steel by molybdate, nitrite and zinc ions in aqueous chloride media containing cupric ions. Molybdate inhibits mild steel corrosion in near neutral and alkaline (pH 6 and above) chloride media and accelerates corrosion in acidic media (below pH 6) both in the presence and absence of cupric ions. Nitrite inhibits mild steel corrosion in chloride media at pH 4.5 and above, but accelerates corrosion below pH 4.5 both in the presence and absence of cupric ions. Molybdate and nitrite act as a synergistic corrosion inhibitor in chloride media with or without cupric ions at pH 4.5 and above. In the acidic region between pH 3 and 4.5, the combination can decrease corrosion with a low concentration of molybdate and high concentration of nitrite. These concentrations depend on the relative amounts of molybdate and nitrite present in the system. Zinc ions inhibit mild steel corrosion only in acidic chloride media. Based on the experimental results, mechanisms of action of molybdate, nitrite and zinc ions on mild steel corrosion in aqueous chloride media with or without cupric ions have been proposed.Keywords: Molybdate; Nitrite; Mild steel; Corrosion rate; Synergistic corrosion inhibitor.© 2009 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.DOI: 10.3329/jsr.v1i1.1053
<i>Origanum majorana</i> Extracts as Mild Steel Corrosion Green Inhibitors in Aqueous Chloride Medium
