scholarly journals Assessment of Surface Water Quality of King Abdullah Canal, Using Physico-Chemical Characteristics and Water Quality Index, Jordan

2015 ◽  
Vol 07 (04) ◽  
pp. 339-352 ◽  
Author(s):  
Atef Faleh Al-Mashagbah
Author(s):  
Nguyen Ngan Ha ◽  
Tran Thi Thu Huong ◽  
Pham The Vinh ◽  
Tran Thi Van

This paper presents the study of integrating the remote sensing technology with in-situ ground observation for assessing the status of water quality in Ca Mau city through the Vietnam Water Quality Index (VN-WQI). The Sentinel-2 image and in-situ surface water samples were collected on 20 February 2020 for this study. The sample results were then specified by samples’ coordination. Besides, Sentinel-2 imaging was processed by radiometric and atmospheric correction, geometric registration, and extracted pixel spectral values from the sample locations. The multiple linear regressions of seven water quality parameters including BOD5, COD, NH4, PO4, TSS, pH, Coliform with surface water’s pixel spectral values from the satellite images were calculated and used to simulate water quality parameters on the satellite image. They were integrated into the VN-WQI to estimate, classify, and evaluate the general surface water quality of the Ca Mau city. The results show that there is a regressive correlation between measured data and image spectral values, and the simulation also well fits with the data with an acceptable error. The surface water quality of Ca Mau city is heavily polluted with almost all water quality parameters recognized at B1 to above B2 level according to the QCVN08-MT:2015/BTNMT. In terms of VN-WQI, the results also illustrate the low quality of surface water and heavy pollution only used for water transportation, not for domestic use. This approach can be a powerful method in spatially monitoring water quality and supporting environment management.


2019 ◽  
Vol 35 (3) ◽  
pp. 1125-1131
Author(s):  
M. Jeyaraj ◽  
A. Indhuleka ◽  
C. Arunpaul

This investigation deals with the determination of various physico-chemical and biological parameters of surface water quality of river Noyyal and its connected ponds at Coimbatore, India. Based on their significance, the sampling locations were selected. There are five sampling locations were selected like river Noyyal at sorce (S1), Perur Lake, (S2), Ukkadam Pond (S3), Singanallur Lake (S4) and Sulur Pond (S5), and samples were collected from each locations at river Noyyal basin in and around Coimbatore district. The surface water quality index determination is prerequisite and essential. In this present work, from different methods of water quality determination, the most commonly used index of National Sanitation Foundation water quality index (NSF-WQI) has been followed. The physico-chemical and biological parameters such as dissolved oxygen, faecal coliforms counts, pH, biochemical oxygen demand, phosphate, nitrates, turbidity, and total dissolved solids were investigated. Except in Noyyal river at source (S1) all the measured parameters are showed to be very high compared to limits suggested by WHO particularly during summer season and thereby it is not suitable for public use.


2019 ◽  
Vol 70 (2) ◽  
pp. 398-406
Author(s):  
Romana Drasovean ◽  
Gabriel Murariu ◽  
Gigi Constantinescu ◽  
Adrian Circiumaru

In order to determine the water quality of Danube River, in the Galati area, the Water Quality Index was calculated. Water Quality Index is a useful number of overall qualities of water. Galati is a Danube port city located in south-eastern of Romania. Samples were taken from 9 places along the Danube starting with the place where the Siret flows into the Danube to the Profiland Steel Plant. Profiland Steel is a company in Galai whose main activities are: sheet and zinc strips; treatment and coating of metals. The monitoring period was one year, from November 2016 to December 2017. Every month, thirty physical - chemical parameters were investigated. In this study the assessment of surface water quality was determined on the basis of various indicators such as: potassium and calcium ions, nitrites, nitrates, total nitrogen, ammonium, chlorides, total phosphorus, sulphates, cadmium, chrome, copper, lead, iron, zinc, density, dissolved oxygen, chemical oxygen demand (CCO-Cr), biochemical oxygen demand (CBO5), electrical conductivity, the density of the conductivity, resistivity, pH, salinity, total dissolved solids. The water quality index (WQI) has been calculated by using Weighted Arithmetic Water Quality Index Method. Two types of correlations were developed: Pearson correlation matrix and Spearman correlation.


Author(s):  
Jyotsana Pandit ◽  
S. K. Bhardwaj

The studies of surface water quality of urban areas has become a major environmental challenge. In effect these aquatic ecosystems are increasingly under strong anthropogenic pressure. This fact causes the deteriorations of their quality and biodiversity. That seems the cases of the surface water of Solan District. Known the importance of these ecosystems in socio-economic activities of this district, it is important to lead studies for water qualities assessment. So, the surface water quality of urban areas of Solan District was assessed using the water quality index (WQI).To realize this objective, water samples were collected from five urban areas (Arki, Baddi, Nalagarh, Parwanoo, Solan) during the summer and winter seasons and were analyzed for major physicochemical parameters, viz. pH, EC, turbidity, TDS, BOD, COD, DO,As, Cr, Zn, Pb, Cd, to determine its suitability for drinking and domestic purposes. In surface water pH, EC, turbidity, TDS, BOD, COD, DO were found in the range of 6.74-7.55, 0.294-0.506 dS m-1,3.71-7.79 NTU, 105.51-253.26 mg l-1, 1.51-3.14 mg l-1,101.79-166.88 mg l-1, 4.16-6.58 mg l-1 consequently. Trace elements Pb, Cr, Zn, As, Cd, were found in the range of 0.04-0.28 mg l-1, 0.034-0.063 mg l-1, 0.22-0.46 mg l-1, 0.004-0.020 mg l-1 and 0.002-0.008 mg l-1 respectively. All water quality parameters except Pb, Cr, Cd were within the permissible limits. Out of all urban areas WQI of Arki (33) and Solan (46) was categorized as good. Whereas WQI of Parwanoo, Baddi and Nalagarh was 69, 62, 57 respectively and was categorized as poor, indicating negative impacts o urbanization and industrialization. The study indicated that urbanization in the district has started impacting surface water sources, therefore bregular quality monitoring is required and for sustainable urbanization the implementation of stringent rules and guidelines are needed to enhance health and preserve them for future generations.


2018 ◽  
Vol 11 (2) ◽  
pp. 653-660 ◽  
Author(s):  
P. S.Bytyçi1 ◽  
H. S. Çadraku ◽  
F. N. Zhushi Etemi ◽  
M. A. Ismaili ◽  
O. B. Fetoshi ◽  
...  

2021 ◽  
Vol 2130 (1) ◽  
pp. 012028
Author(s):  
M Kulisz ◽  
J Kujawska

Abstract The aim of this paper is to present the potential of using neural network modelling for the prediction of the surface water quality index (WQI). An artificial neural network modelling has been performed using the physicochemical parameters (TDS, chloride, TH, nitrate, and manganese) as an input layer to the model, and the WQI as an output layer. The physicochemical parameters have been taken from five measuring stations of the river Warta in the years 2014-2018 via the Chief Inspectorate of Environmental Protection (GIOŚ). The best results of modelling were obtained for networks with 5 neurons in the hidden layer. A high correlation coefficient (general and within subsets) 0.9792, low level of MSE in each subset (training, test, validation), as well as RMSE at a level of 0.624507639 serve as a confirmation. Additionally, the maximum percentage of an error for WQI value did not exceed 4%, which confirms a high level of conformity of real data in comparison to those obtained during prediction. The aforementioned results clearly present that the ANN models are effective for the prediction of the value of the Surface water quality index and may be regarded as adequate for application in simulation by units monitoring condition of the environment.


Sign in / Sign up

Export Citation Format

Share Document