scholarly journals Surface Water Pollution Risk From Vietnam Water Quality Index (VN-WQI) in the Ca Mau City, Mekong Delta

2021 ◽  
Vol 20 (4) ◽  
Author(s):  
Nguyen Ngan Ha ◽  
Tran Thi Thu Huong ◽  
Pham The Vinh ◽  
Tran Thi Van
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Sentinel 2

This paper presents the study of integrating the remote sensing technology with in-situ ground observation for assessing the status of water quality in Ca Mau city through the Vietnam Water Quality Index (VN-WQI). The Sentinel-2 image and in-situ surface water samples were collected on 20 February 2020 for this study. The sample results were then specified by samples’ coordination. Besides, Sentinel-2 imaging was processed by radiometric and atmospheric correction, geometric registration, and extracted pixel spectral values from the sample locations. The multiple linear regressions of seven water quality parameters including BOD5, COD, NH4, PO4, TSS, pH, Coliform with surface water’s pixel spectral values from the satellite images were calculated and used to simulate water quality parameters on the satellite image. They were integrated into the VN-WQI to estimate, classify, and evaluate the general surface water quality of the Ca Mau city. The results show that there is a regressive correlation between measured data and image spectral values, and the simulation also well fits with the data with an acceptable error. The surface water quality of Ca Mau city is heavily polluted with almost all water quality parameters recognized at B1 to above B2 level according to the QCVN08-MT:2015/BTNMT. In terms of VN-WQI, the results also illustrate the low quality of surface water and heavy pollution only used for water transportation, not for domestic use. This approach can be a powerful method in spatially monitoring water quality and supporting environment management.

scholarly journals Assessment of coastal surface water quality for irrigation purpose

2020 ◽  
Vol 15 (4) ◽  
pp. 960-972
Author(s):  
M. F. Serder ◽  
M. S. Islam ◽  
M. R. Hasan ◽  
M. S. Yeasmin ◽  
M. G. Mostafa
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Water Type ◽  
Post Monsoon ◽  
Irrigation Purpose

Abstract The study aimed to assess the coastal surface water quality for irrigation purposes through the analysis of the water samples of some selected estuaries, rivers, and ponds. The analysis results showed that the mean value of typical water quality parameters like electrical conductivity (EC), total dissolved solids (TDS), sodium (Na+), and chloride (Cl−) ions exceeded the permissible limit of the Department of Environment (DoE), Bangladesh 2010, and FAO, 1985 for the pre- and post-monsoon seasons. The Piper diagram indicated a Na-Cl water type, especially during the pre- and post-monsoon seasons. The water quality parameters in the areas showed a higher amount than the standard permissible limits, indicating that the quality is deteriorating. The water quality index values for domestic uses showed very poorly to unsuitable in most of the surface waters except pond water, especially during the pre- and post-monsoon periods. The surface water quality index for irrigation purpose usages was found to be high and/ or severely restricted (score: 0–55) during the pre- and post-monsoon seasons. The study observed that due to saline water intrusion, the water quality deterioration started from post-monsoon and reached its highest level during the pre-monsoon season, which gradually depreciates the water quality in coastal watersheds of Bangladesh.

scholarly journals Spatiotemporal Analysis of Surface Water Quality in Dong Thap Province, Vietnam Using Water Quality Index and Statistical Approaches

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 336
Author(s):  
Nguyen Thanh Giao ◽  
Phan Kim Anh ◽  
Huynh Thi Hong Nhien
Keyword(s):  
Water Pollution ◽  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Oxygen Demand ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
E Coli

The study was conducted to spatiotemporally analyze the quality, location and critical water variables influencing water quality using water monitoring data from the Department of Environment and Natural Resources, Dong Thap province in 2019. The water quality parameters including turbidity, pH, temperature, dissolved oxygen (DO), total suspended solids (TSS), biological oxygen demand (BOD), chemical oxygen demand (COD), nitrite (N-NO2−), nitrate (N-NO3−), ammonium (N-NH4+), total nitrogen (TN), orthophosphate (P-PO43−), chloride (Cl−), oil and grease, sulfate (SO42−), coliforms, and Escherichia coli (E. coli) were collected at 58 locations with the frequency of four times per year (February, May, August, and November). These parameters were compared with national technical regulation on surface water quality—QCVN 08-MT: 2015/BTNMT. Water quality index (WQI) was calculated and spatially presented by geographical information system (GIS) tool. Pearson correlation analysis, cluster analysis (CA), and principal component analysis (PCA) were used to evaluate the correlation among water quality parameters, group and reduce the sampling sites, and identify key parameters and potential water pollution sources. The results showed that TSS, BOD, COD, N-NH4+, P-PO43−, coliforms, and E. coli were the significant concerns impairing the water quality. Water quality was assessed from poor to medium levels by WQI analysis. CA suggested that the current monitoring locations could be reduced from 58 sites to 43 sites which can be saved the total monitoring budget up to 25.85%. PCA showed that temperature, pH, TSS, DO, BOD, COD, N-NH4+, N-NO2−, TN, P-PO43−, coliforms, and E. coli were the key water parameters influencing water quality in Dong Thap province’s canals and rivers; thus, these parameters should be monitored annually. The water pollution sources were possibly hydrological conditions, water runoff, riverbank erosion, domestic and urban activities, and industrial and agricultural discharges. Significantly, the municipal and agricultural wastes could be decisive factors to the change of surface water quality in the study area. Further studies need to focus on identifying sources of water pollution for implementing appropriate water management strategies.

scholarly journals Quality Characterization of Surface Water Sources Using Water Quality Index in Urban Areas of Solan District of Himachal Pradesh

2020 ◽  
pp. 1-12
Author(s):  
Jyotsana Pandit ◽  
S. K. Bhardwaj
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Urban Areas ◽  
Quality Index ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Water Sources ◽  
Anthropogenic Pressure

The studies of surface water quality of urban areas has become a major environmental challenge. In effect these aquatic ecosystems are increasingly under strong anthropogenic pressure. This fact causes the deteriorations of their quality and biodiversity. That seems the cases of the surface water of Solan District. Known the importance of these ecosystems in socio-economic activities of this district, it is important to lead studies for water qualities assessment. So, the surface water quality of urban areas of Solan District was assessed using the water quality index (WQI).To realize this objective, water samples were collected from five urban areas (Arki, Baddi, Nalagarh, Parwanoo, Solan) during the summer and winter seasons and were analyzed for major physicochemical parameters, viz. pH, EC, turbidity, TDS, BOD, COD, DO,As, Cr, Zn, Pb, Cd, to determine its suitability for drinking and domestic purposes. In surface water pH, EC, turbidity, TDS, BOD, COD, DO were found in the range of 6.74-7.55, 0.294-0.506 dS m-1,3.71-7.79 NTU, 105.51-253.26 mg l-1, 1.51-3.14 mg l-1,101.79-166.88 mg l-1, 4.16-6.58 mg l-1 consequently. Trace elements Pb, Cr, Zn, As, Cd, were found in the range of 0.04-0.28 mg l-1, 0.034-0.063 mg l-1, 0.22-0.46 mg l-1, 0.004-0.020 mg l-1 and 0.002-0.008 mg l-1 respectively. All water quality parameters except Pb, Cr, Cd were within the permissible limits. Out of all urban areas WQI of Arki (33) and Solan (46) was categorized as good. Whereas WQI of Parwanoo, Baddi and Nalagarh was 69, 62, 57 respectively and was categorized as poor, indicating negative impacts o urbanization and industrialization. The study indicated that urbanization in the district has started impacting surface water sources, therefore bregular quality monitoring is required and for sustainable urbanization the implementation of stringent rules and guidelines are needed to enhance health and preserve them for future generations.

scholarly journals Assessment of Surface Water Quality of Danube River in Terms of Usual Parameters and Correlation Analyses

2019 ◽  
Vol 70 (2) ◽  
pp. 398-406
Author(s):  
Romana Drasovean ◽  
Gabriel Murariu ◽  
Gigi Constantinescu ◽  
Adrian Circiumaru
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Pearson Correlation ◽  
Oxygen Demand ◽  
Surface Water Quality ◽  
Danube River ◽  
Index Method

In order to determine the water quality of Danube River, in the Galati area, the Water Quality Index was calculated. Water Quality Index is a useful number of overall qualities of water. Galati is a Danube port city located in south-eastern of Romania. Samples were taken from 9 places along the Danube starting with the place where the Siret flows into the Danube to the Profiland Steel Plant. Profiland Steel is a company in Galai whose main activities are: sheet and zinc strips; treatment and coating of metals. The monitoring period was one year, from November 2016 to December 2017. Every month, thirty physical - chemical parameters were investigated. In this study the assessment of surface water quality was determined on the basis of various indicators such as: potassium and calcium ions, nitrites, nitrates, total nitrogen, ammonium, chlorides, total phosphorus, sulphates, cadmium, chrome, copper, lead, iron, zinc, density, dissolved oxygen, chemical oxygen demand (CCO-Cr), biochemical oxygen demand (CBO5), electrical conductivity, the density of the conductivity, resistivity, pH, salinity, total dissolved solids. The water quality index (WQI) has been calculated by using Weighted Arithmetic Water Quality Index Method. Two types of correlations were developed: Pearson correlation matrix and Spearman correlation.

scholarly journals Assessment of surface water quality in relation to water quality index of tropical lentic environment, Central Gujarat, India

2014 ◽  
Vol 3 (1) ◽  
pp. 168-176 ◽  
Author(s):  
Hiren B Soni ◽  
Sheju Thomas
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Management Strategies ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Total Alkalinity ◽  
Total Hardness ◽  
Human Consumption

The present study involved the determination of surface water quality index of tropical sacred wetland viz. Dakor Pilgrimage Wetland (DPW), Central Gujarat, India. The main aim of the study was to evaluate various water quality parameters to draw-out the water quality index for an assessment of a tropical aquatic body. The monthly values of pH, Dissolved Oxygen (DO), Total Suspended Solids (TSS), Total Dissolved Solids (TDS), Total alkalinity (TA), Total Hardness (TH), Calcium Hardness (Ca), Magnesium Hardness (Mg), Chloride, Sulphate, Phosphate, Sodium, and Potassium, were analyzed to compute water quality index (WQI). The results manifest that WQI at site 1 (D1) was maximum (161.74), followed by D2 (159.96), and minimum at site 3 (D3) (157.19). The values clearly depicts that quality of water is completely unfit for human consumption unless and until strict and mandatory steps are taken to rejuvenate it. The suggestive measures to improve the overall health of an aquatic body is also discussed herewith alongwith conservation measures and management strategies. DOI: http://dx.doi.org/10.3126/ije.v3i1.9952 International Journal of Environment Vol.3(1) 2014: 168-176

scholarly journals Water Quality Assessment of Surface and Groundwater Sources Using a Water Quality Index Method: A Case Study of a Peri-Urban Town in Southwest, Nigeria

Environments ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 23 ◽  
Author(s):  
Samuel Olasoji ◽  
Nather Oyewole ◽  
Bayode Abiola ◽  
Joshua Edokpayi
Keyword(s):  
Water Quality ◽  
Water Samples ◽  
Water Quality Index ◽  
Quality Index ◽  
Quality Parameters ◽  
Faecal Coliform ◽  
Water Quality Parameters ◽  
Treated Water ◽  
E Coli

Sustainable access to safe drinking water remains a global problem as more people in the world still consume water from unimproved sources. This study was carried out to evaluate the quality of 12 different water sources and 2 treated water used by a peri-urban town in the Southwest region of Nigeria to assess their suitability for drinking and domestic use. Water quality parameters studied include pH, temperature, acidity, total alkalinity, chloride content and total CO2. A Flame Atomic Absorption spectrophotometer was used to determine the concentrations of Ca, Mg, Cu, Cr, and Pb in the water samples. The total coliform was determined using the most probable number technique while a qualitative method was used to detect the presence of faecal coliform and E. coli in the water samples. All the physicochemical water quality parameters complied with regulatory standards. Similarly, most of the heavy metals also complied except for some sites. Faecal coliform and E. coli tested positive for all the samples except one of the tap water sample. Majority of the water samples (86%) were rated as excellent based on the physicochemical parameters. One sample each was rated as having poor and good water quality, respectively. All the samples tested positive for faecal coliform bacteria and E. coli except one (treated water). It is recommended that Microbial water quality parameters be included in all Water Quality Index (WQI) analyses in order to give the true status of the quality of a water resource.

scholarly journals Assessment of Water Quality of Brahmani River using Correlation and Regression Analysis

2020 ◽  
Author(s):  
Saroj Nayak
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Correlation Coefficient ◽  
Surface Water Quality ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Data ◽  
Chemical Parameters ◽  
Water Quality Data

This work evaluates the surface water quality in terms of physico-chemical parameters of the Brahmani River, Odisha using statistical analysis involving the calculation of correlation coefficient and regression equation. Besides this, the work also highlights and draws attention towards the “Water Quality Index” in a simplified format which may be used at large and could represent the reliable picture of water quality. Surface water quality data is taken from OSPCB of various location i.e. Panposh D/S, Rourkela D/S, Rengali, Talcher U/S, Kamalanga D/S, Bhuban, Pattamundai and was assessed for summer, monsoon, winter for the years 2011, 2012, 2013, 2014 and 2015. Average of values, minimum of values and maximum of values of water quality parameters were obtained seasonally over the above mentioned years. Besides this, the standard deviation for the water quality parameters was also obtained for water quality parameters namely pH, Temperature, DO, TDS, Alkalinity, EC, Na+, Ca2+, Mg2+, K+, F-, Cl-, NO3-, SO42- and PO42-. Seasonal changes in various physical and chemical parameters were analysed.The values obtained were compared with the guideline values for drinking water by Bureau of Indian Standard (BIS). A systematic correlation and regression study is carried out for three seasons, showed linear relationship among different water quality parameters. This provides an easy and rapid method of monitoring water quality. Highly significant (0.8< r <1.0), moderately significant (0.6< r <0.8) and significant (0.5< r <0.6) correlations between the parameters have been worked out. High correlation coefficient has been observed between TDS,EC-Na+, Ca2+, Cl-, SO42- ; Na+- Cl-. From the collected quantities, certain parameters were selected to derive WQI for the variations in water quality of each designated sampling site. WQI of Brahmani River ranged from 36.7 to 44.1 which falls in the range of good quality of water.Panposh D/S and Rourkela D/S showed poor water quality in summer and winter season. It is shown that WQI may be a useful tool for assessing water quality and predicting trend of variation in water quality at differentlocations in the Brahmani River.

scholarly journals Developing Water Quality Index to Assess the Quality of the Drinking Water

2018 ◽  
Vol 4 (10) ◽  
pp. 2345 ◽  
Author(s):  
Shahad Esmaeel Mohammed ◽  
Khalid Adel Abdulrazzaq
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
River Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Industrial Effluents ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Euphrates River

In the present study, an attempt has been to develop a new water quality index (WQI) method that depends on the Iraqi specifications for drinking water (IQS 417, 2009)  to assess the validity of the Euphrates River for drinking by classifying the quality of the river water at different stations along its entire reach inside the Iraqi lands. The proposed classifications by this method are: Excellent, Good, Acceptable, Poor, and Very poor. Eight water quality parameters have been selected to represent the quality of the river water these are: Ion Hydrogen Concentration (pH), Calcium (Ca), Magnesium (Mg), Sodium (Na), Chloride (Cl), Sulphate (SO_4), Nitrate (NO_3), and Total Dissolved Solids (TDS). The variation of the water quality parameters along the river have been represented by graphs using Excel.2013 software. The results revealed that the quality of the Euphrates River ranges from “Good” to “Poor”, it enters the Iraqi borders with “Good” water quality and gradually its quality begins to decrease after it receives pollution from many sources such as domestic sewage and different industrial effluents until its quality becomes “Poor” according to the proposed classification. Finally the proposed WQI can be used as a tool to assess the quality of the river with both place and time.

Sign in / Sign up

Export Citation Format

Share Document