The Application of Hybrid III 5th Percentile Dummy FE Model for Rear Row Occupant Simulation in Frontal Crash Test

2015 ◽  
Author(s):  
Jia Hu
Keyword(s):  
Crash Test ◽  
Fe Model ◽  
Frontal Crash ◽  
Hybrid Iii

Structure Improvement of the S Beam Based on the Safety of SUV

2010 ◽  
Vol 34-35 ◽  
pp. 675-680
Author(s):  
Jun Wu ◽  
Li Bo Cao ◽  
Tian Zhi Chen ◽  
Chen Chen Hu ◽  
Bing Hui Jiang ◽  
...  
Keyword(s):  
Rigid Body ◽  
Crash Test ◽  
Fe Model ◽  
Frontal Impact ◽  
Frontal Crash ◽  
Occupant Protection ◽  
Body Model ◽  
Crash Safety ◽  
Rigid Body Model ◽  
Structure Improvement

The S beam of a production SUV appeared instable deformation in frontal crash test, which was not beneficial to occupant protection. So the deformation of S beam should be controlled to improve the crashworthiness. Inner improvement structures were proposed according to the prototype S beam. A frontal crash FE model and a multi-rigid body model were developed and validated to investigate the crash safety of frontal impact. The influences of the improvements to the deformation of S beam and the energy absorption of longitudinal beams were analyzed by the FE model, and the injury risks of head and thoraces were analyzed by the multi-rigid body model. The better improvement structure was adopted in the frame for the crash test to validate the effectiveness of improved scheme, and the result shows better crash performance of frontal impact for prototype vehicle. Meanwhile, simulation study on crash safety of 40% offset crash were also conducted, which indicated that improved scheme was also beneficial for crash safety of 40% offset crash.

scholarly journals Finite Element Model Validation of the Hybrid-III Rail Safety (H3-RS) Anthropomorphic Test Device (ATD)

2018 ◽  
Author(s):  
Shaun Eshraghi ◽  
Kristine Severson ◽  
David Hynd ◽  
A. Benjamin Perlman
Keyword(s):  
Finite Element ◽  
Public Transportation ◽  
Crash Test ◽  
Fe Model ◽  
Test Device ◽  
Sled Test ◽  
Impact Tests ◽  
Hybrid Iii ◽  
Pendulum Impact ◽  
Vertical Impact

The Hybrid-III Rail Safety (H3-RS) anthropomorphic test device (ATD), also known as a crash test dummy, was developed by the Rail Safety and Standards Board (RSSB), DeltaRail (now Resonate Group Ltd.), and the Transport Research Laboratory (TRL) in the United Kingdom between 2002 and 2005 for passenger rail safety applications [1]. The H3-RS is a modification of the standard Hybrid-III 50th percentile male (H3-50M) ATD with additional features in the chest and abdomen to increase its biofidelity and eight sensors to measure deflection. The H3-RS features bilateral (left and right) deflection sensors in the upper and lower chest and in the upper and lower abdomen; whereas, the standard H3-50M only features a single unilateral (center) deflection sensor in the chest with no deflection sensors located in the abdomen. Additional H3-RS research was performed by the Volpe National Transportation Systems Center (Volpe Center) under the direction of the U.S. Department of Transportation, Federal Railroad Administration (FRA) Office of Research, Development, and Technology. The Volpe Center contracted with TRL to conduct a series of dynamic pendulum impact tests [2]. The goal of testing the abdomen response of the H3-RS ATD was to develop data to refine an abdomen design that produces biofidelic and repeatable results under various impact conditions with respect to impactor geometry, vertical impact height, and velocity. In this study, the abdominal response of the H3-RS finite element (FE) model that TRL developed is validated using the results from pendulum impact tests [2]. Results from the pendulum impact tests and corresponding H3-RS FE simulations are compared using the longitudinal relative deflection measurements from the internal sensors in the chest and abdomen as well as the longitudinal accelerometer readings from the impactor. The abdominal response of the H3-RS FE model correlated well with the physical ATD as the impactor geometry, vertical impact height, and velocity were changed. There were limitations with lumbar positioning of the H3-RS FE model as well as the material definition for the relaxation rate of the foam in the abdomen that can be improved in future work. The main goal of validating the abdominal response of the dummy model is to enable its use in assessing injury potential in dynamic sled testing of crashworthy workstation tables, the results of which are presented in a companion paper [3]. The authors used the model of the H3-RS ATD to study the 8G sled test specified in the American Public Transportation Association (APTA) workstation table safety standard [4]. The 8G sled test is intended to simulate the longitudinal crash accleration in a severe train-to-train collision involving U.S. passenger equipment. Analyses of the dynamic sled test are useful for studying the sensitivity of the sled test to factors such as table height, table force-crush behavior, seat pitch, etc., which help to inform discussions on revisions to the test requirements eventually leading to safer seating environments for passengers.

Comparison of Crash Test and Simulation Results for Impact of Silverado Pickup into New Jersey Barrier under Manual for assessing Safety Hardware

2012 ◽  
Vol 2309 (1) ◽  
pp. 114-126 ◽  
Author(s):  
Dhafer Marzougui ◽  
Cing-Dao (Steve) Kan ◽  
Kenneth S. Opiela
Keyword(s):  
New Jersey ◽  
Primary Objective ◽  
Crash Test ◽  
Fe Model ◽  
George Washington ◽  
Statistical Measures ◽  
Detailed Simulation ◽  
Analysis Center ◽  
Simulation Results ◽  
Concrete Barrier

The National Crash Analysis Center (NCAC) at the George Washington University simulated the crash of a 2,270-kg Chevrolet Silverado pickup truck into a standard 32-in. New Jersey shape concrete barrier under the requirements of Test 3–11 of the Manual for Assessing Safety Hardware (MASH). The new, detailed finite element (FE) model for the Chevrolet Silverado was used as the surrogate for the MASH 2270P test vehicle. An FE model of the New Jersey barrier was drawn from the array of NCAC hardware models. The primary objective of this analysis was to simulate the crash test conducted to evaluate how this commonly used, NCHRP 350–approved device would perform under the more rigorous MASH crashworthiness criteria. A secondary objective was to use newly developed verification and validation (V&V) procedures to compare the results of the detailed simulation with the results of crash tests undertaken as part of another project. The crash simulation was successfully executed with the detailed Silverado FE model and NCAC models of the New Jersey concrete barrier. Traditional comparisons of the simulation results and the data derived from the crash test suggested that the modeling provided viable results. Further comparisons employing the V&V procedures provided a structured assessment across multiple factors reflected in the phenomena importance ranking table. Statistical measures of the accuracy of the test in comparison with simulation results provided a more robust validation than previous approaches. These comparisons further confirmed that the model was able to replicate impacts with a 2270P vehicle, as required by MASH.

Crash Test Ratings and Real-World Frontal Crash Outcomes: A CIREN Study

2010 ◽  
Vol 68 (5) ◽  
pp. 1099-1105 ◽  
Author(s):  
Gabriel E. Ryb ◽  
Cynthia Burch ◽  
Timothy Kerns ◽  
Patricia C. Dischinger ◽  
Shiu Ho
Keyword(s):  
Real World ◽  
Crash Test ◽  
Frontal Crash

Multidirection Validation of a Finite Element 50th Percentile Male Hybrid III Anthropomorphic Test Device for Spaceflight Applications

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Derek A. Jones ◽  
James P. Gaewsky ◽  
Mona Saffarzadeh ◽  
Jacob B. Putnam ◽  
Ashley A. Weaver ◽  
...  
Keyword(s):  
Finite Element ◽  
Injury Risk ◽  
Fe Model ◽  
Fe Modeling ◽  
Test Device ◽  
Qualitative And Quantitative ◽  
Hybrid Iii ◽  
Physical Tests ◽  
Quantitative Results ◽  
Male Hybrid

The use of anthropomorphic test devices (ATDs) for calculating injury risk of occupants in spaceflight scenarios is crucial for ensuring the safety of crewmembers. Finite element (FE) modeling of ATDs reduces cost and time in the design process. The objective of this study was to validate a Hybrid III ATD FE model using a multidirection test matrix for future spaceflight configurations. Twenty-five Hybrid III physical tests were simulated using a 50th percentile male Hybrid III FE model. The sled acceleration pulses were approximately half-sine shaped, and can be described as a combination of peak acceleration and time to reach peak (rise time). The range of peak accelerations was 10–20 G, and the rise times were 30–110 ms. Test directions were frontal (−GX), rear (GX), vertical (GZ), and lateral (GY). Simulation responses were compared to physical tests using the correlation and analysis (CORA) method. Correlations were very good to excellent and the order of best average response by direction was −GX (0.916±0.054), GZ (0.841±0.117), GX (0.792±0.145), and finally GY (0.775±0.078). Qualitative and quantitative results demonstrated the model replicated the physical ATD well and can be used for future spaceflight configuration modeling and simulation.

Development of Upper Extremity Finite Element Model for Elderly Female: Validated Against Dynamic Loading Conditions

2017 ◽  
Author(s):  
Anand Hammad ◽  
Anil Kalra ◽  
Prashant Khandelwal ◽  
Xin Jin ◽  
King H. Yang
Keyword(s):  
Finite Element ◽  
Upper Extremity ◽  
Injury Risk ◽  
Experimental Studies ◽  
Upper Extremities ◽  
Whole Body ◽  
Crash Test ◽  
Fe Model ◽  
Long Term Effects ◽  
Elderly Female

Injuries to the upper extremities that are caused by dynamic impacts in crashes, including contact with internal instrument panels, has been a major concern, especially for smaller female occupants, and the problem worsens with increasing age due to reduced strength of the bones. From the analysis of 1988–2010 CDS unweighted data, it was found that risk of AIS ≥ 2 level for the arm was 58.2±20.6 percent higher in females than males, and the injury risk for a 75-year-old female occupant relative to a 21-year-old subjected to a similar physical insult was 4.2 times higher. Although injuries to upper extremities are typically not fatal, they can have long-term effects on overall quality of life. Therefore, it is important to minimize risks of injuries related to upper extremities, especially for elderly females, who are most at risk. Current anthropomorphic surrogates, like crash-test dummies, cannot be directly used to study injury limits, as these dummies were developed mainly to represent the younger population. The current study is focused on the development of a finite element (FE) model representing the upper extremity of an elderly female. This can be further used to analyze the injury mechanisms and tolerance limits for this vulnerable population. The FE mesh was developed through Computer Tomography (CT) scanned images of an elderly female cadaver, and the data included for validation of the developed model were taken from the experimental studies published in scientific literature, but only the data directly representing elderly females were used. It was found that the developed model could predict fractures in the long bones of elderly female specimens and could be further used for analyzing injury tolerances for this population. Further, it was determined that the developed segmental model could be integrated with the whole body FE model of the elderly female.

2204 Comparison of impact response between 3-year-old FE model and HYBRID III

2005 ◽  
Vol 2005.18 (0) ◽  
pp. 231-232
Author(s):  
Kazuya IWATA ◽  
Koji MIZUNO ◽  
Eiichi TANAKA ◽  
Sota YAMAMOTO ◽  
Nobuhiko TANAKA ◽  
...  
Keyword(s):  
Impact Response ◽  
Fe Model ◽  
Hybrid Iii
Sign in / Sign up

Export Citation Format

Share Document