Properties of Low Strength Concrete made with Recycled Concrete Aggregate and Fly Ash

Author(s):  
R Kumar ◽  
D Manoharan
2009 ◽  
Vol 620-622 ◽  
pp. 255-258 ◽  
Author(s):  
Cheol Woo Park

As the amount of waste concrete has been increased and recycling technique advances, this study investigates the applicability of recycled concrete aggregate for concrete structures. In addition fly ash, the industrial by-product, was considered in the concrete mix. Experimental program performed compressive strength and chloride penetration resistance tests with various replacement levels of fine recycled concrete aggregate and fly ash. In most case, the design strength, 40MPa, was obtained. It was known that the replacement of the fine aggregate with fine RCA may have greater influence on the strength development rather than the addition of fly ash. It is recommended that when complete coarse aggregate is replaced with RCA the fine RCA replacement should be less than 60%. The recycled aggregate concrete can achieve sufficient resistance to the chloride ion penetration and the resistance can be more effectively controlled by adding fly ash. It I finally conclude that the recycled concrete aggregate can be successfully used in the construction field and the recycling rate of waste concrete and flay ash should be increased without causing significant engineering problems.


2018 ◽  
Vol 7 (3.35) ◽  
pp. 1
Author(s):  
T. V. Arul Prakash ◽  
Dr. M. Natarajan ◽  
Dr. T. Senthil Vadivel ◽  
K. Vivek

This article presents the influence of the Recycled Concrete Aggregate (RCA) on the mechanical properties of self-compacting fly ash concrete (M30 Grade). The RCA from local construction demolition site were employed as a replacement for natural coarse aggregate (0% - 30%) in self-compacting concrete (SCC). The Viscosity modifying material used in this study was Class F fly ash. The results indicate that recycled concrete aggregate can be replaced by an optimal 25% replacement percentage in the manufacture of SCC without significantly affecting strength and durability.  


2014 ◽  
Vol 1054 ◽  
pp. 199-204 ◽  
Author(s):  
Wojciech Kubissa ◽  
Roman Jaskulski ◽  
Jacek Szpetulski ◽  
Anna Gabrjelska ◽  
Ewelina Tomaszewska

In the article the possibility of utilization of two waste materials: Recycled Concrete Aggregate (RCA) fraction 0-2 mm and Class C fly ash (from lignite burning power plant) in Controlled Low-Strength Material (CLSM) was presented. The research covered twelve different mixtures. The mixtures differed in cement and fly ash content as well as content of the fine aggregate. As a fine aggregate 0-2 mm fraction of RCA or river sand were used. The results showed that use the fine fraction RCA instead of sand does not cause technological problems and allows, depending on the needs, obtaining the material with different properties and a wide range of applications.


Sign in / Sign up

Export Citation Format

Share Document