scholarly journals Frontal Sinus as an aid in Gender Identification in Forensic Dentistry: A Retrospective Study using Cone Beam Computed Tomography

2018 ◽  
Vol 9 (1) ◽  
pp. 34-37
Author(s):  
Almas Binnal ◽  
Anu S Jacob
Keyword(s):  
Computed Tomography ◽  
Retrospective Study ◽  
Cone Beam Computed Tomography ◽  
Frontal Sinus ◽  
Cone Beam ◽  
Gender Identification ◽  
The Difference ◽  
And Gender ◽  
The Right ◽  
Mass Disasters

ABSTRACT Aim The aim of our study was to measure the frontal sinus morphology that could aid us in gender determination and also to assess the difference in measurements between the right and left frontal sinus. Materials and methods A retrospective study was done using 100 cone beam computed tomography (CBCT) images (50 males and 50 females) matched with age and gender with full field of view (FOV). The examinations were carried out using Promax 3DMid (Planmeca Oy., Helsinki, Finland) CBCT unit. The frontal sinus was assessed in coronal, sagittal, and axial planes, and the maximum measurements in each section were recorded. The results to compare the right and left frontal sinus were analyzed using paired t-tests, and independent Student's t-test was used to compare the difference in measurements of frontal sinus between males and females. Results We found that the left side of the frontal sinus was bigger than the right side, and while comparing between the genders, it was found that the measurements were greater in males. Statistically significant results were obtained on comparing between the sides and gender. Conclusion As mentioned in previous studies, frontal sinus measurements are significantly higher in males compared with females which can, therefore, be used in gender identification in cases of mass disasters. Clinical significance Frontal sinus measurements can be used as an adjunct in gender identification in mass disasters and with advances in technology. Cone beam computed tomography, in addition to providing accurate measurements, has overcome all the disadvantages with two-dimensional imaging. How to cite this article Denny C, Jacob AS, Ahmed J, Natarajan S, Binnal A, Sujir N. Frontal Sinus as an aid in Gender Identification in Forensic Dentistry: A Retrospective Study using Cone Beam Computed Tomography. World J Dent 2018;9(1):34-37.

scholarly journals Determining the Size of the Mental Foramen: A Cone-Beam Computed Tomography Study

2017 ◽  
Vol 7 (2) ◽  
pp. 20
Author(s):  
Seda Falakaloglu ◽  
Artemisa Veis
Keyword(s):  
Computed Tomography ◽  
Retrospective Study ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Axial Plane ◽  
Cone Beam ◽  
Coronal Image ◽  
Significant Difference ◽  
Student’S T ◽  
The Right

Aim: Knowledge of the position of the mental foramen is important to prepare strategy when administering regional anesthesia, performing dental surgical procedures, endodontic treatments. Also, it is critical to analyze diameter of mental foramen in sagittal, coronal, and axial images.  The aim of this retrospective study was to determine the diameter of the MF in different planes from CBCT images. Methodology: This study was designed at Department of Endodontics, Dicle University, Diyarbakır, Turkey. One hundred twenty three (67 female, 56 male) CBCT scans that met the study criteria were obtained. All images were obtained from i-CAT (Imaging Sciences International, Hatfield, PA). Data were analyzed using Student’s t-tests and Tukey HSD tests. Results: For the analysis of age, data were divided into four groups: 12–17, 18–29, 30–49, and ≥50 years. The data were also divided into two groups by gender. Axial and coronal image measurements were also divided into right and left. There was a statistical difference compared with females and males (p<0.05). In the coronal plane, the right region showed significant differences in measurements between the groups (p<0.05). In the axial plane, there was no statistically significant difference between them (p>0.05). The differences between the groups in the left region in the axial plane measurements were significant (p<0.05). Conclusions: Using CBCT imaging superimposition of anatomical structures can be eliminated. It is important that determine that the size of the mental foramen. This study is a retrospective study using CBCT from patient and find that the size of the mental foramen. How to cite this article: Falakaloglu S, Veis A. Determining the size of the mental foramen: A cone-beam computed tomography study. Int Dent Res 2017;7:20-25. 

A retrospective pilot study of correlation of first maxillary premolar root trunk length with age and gender: a cone beam computed tomography study

2020 ◽  
Vol 69 (1) ◽  
Author(s):  
Andrea Pilloni ◽  
Lorenza Montanaro ◽  
Fabiola Dell'olmo ◽  
Alberto Fonzar ◽  
Francesco Cairo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Pilot Study ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Age And Gender ◽  
Trunk Length ◽  
And Gender

scholarly journals Variations in vertical mucosal thickness at edentulous ridge according to site and gender measured by cone-beam computed tomography

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Motohiro Munakata ◽  
Koudai Nagata ◽  
Minoru Sanda ◽  
Ryota Kawamata ◽  
Daisuke Sato ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Treatment Plan ◽  
Cone Beam ◽  
Alveolar Ridge ◽  
Marginal Bone Loss ◽  
Mandibular Molar ◽  
Mucosal Thickness ◽  
And Gender ◽  
Edentulous Patients

Abstract Background The vertical thickness of the peri-implant mucosa is associated with the amount of post treatment marginal bone loss. However, the variations in mucosal thickness at the different edentulous sites have been sparsely documented. The purpose of the study was to conduct a survey of the frequency distribution of variations in mucosal thickness at the different sites of the edentulous alveolar ridge and to compare them according to gender. Our study included 125 partially edentulous patients having a total of 296 implant sites. Cone-beam computed tomography (CBCT) scans were obtained by placing a diagnostic template with a radiopaque crown indicator on the ridge to determine the mucosal thickness at the crest of the alveolar ridge. Results The mucosal thickness was 3.0±1.3 mm in the maxilla, which was significantly greater than the mucosal thickness of 2.0±1.0 mm in the mandible (p<0.001). In both the maxilla and the mandible, the mucosa was the thickest in the anterior region, followed by the premolar and molar regions. Sites were further classified into two groups based on whether the mucosal thickness was greater than 2 mm. In the mandible, more than half of the sites showed a mucosal thickness of 2 mm or less. Conclusions Although this study was a limited preoperative study, the vertical mucosal thickness at the edentulous ridge differed between the maxillary and mandibular regions. The majority of sites in the mandibular molar region had a mucosal thickness of less than 2 mm. Practitioners might be able to develop an optimal dental implant treatment plan for long-term biologic and esthetic stability by considering these factors.

scholarly journals Intrusion of maxillary molar roots into the maxillary sinus in a sample of the Egyptian population using cone beam computed tomography

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Esraa Ahmed Eid ◽  
Fatma Mostafa El-Badawy ◽  
Walaa Mohamed Hamed
Keyword(s):  
Computed Tomography ◽  
Maxillary Sinus ◽  
Cone Beam Computed Tomography ◽  
Third Molar ◽  
Cone Beam ◽  
Egyptian Population ◽  
Maxillary Molar ◽  
Maxillary Sinus Floor ◽  
Sinus Floor ◽  
The Right

Abstract Background The proximity of the maxillary sinus floor to the maxillary molar roots increases the probability of oroantral communication on conducting any surgical or endodontic procedure in the involved area. The aim of this study is to evaluate the relationship between each maxillary molar root and maxillary sinus floor using cone beam computed tomography. Predicting the probability of protrusion of each root into the sinus will consequently predict the probability of occurrence of the oroantral fistula in a sample of the Egyptian population. Results The total number of roots located outside the sinus was 121 (35.3%), while those contacting the sinus floor were 80 (23.3%) and those intruded the sinus were 141 (41.2%). The percentage of root intrusion into the sinus in males (56.9%) was significantly (p = 0.01) higher than females (42.9%). The probability of root intrusion in the left molars (54.2%) was non-significantly (p = 0.067) higher than that of the right side (44.3%). As for the type of tooth, the second molar showed the highest probability of root intrusion into the sinus (55.3%) followed by the third molars (52.6%) then the first molars (40.9). According to the type of root, the mesiobuccal root showed the highest probability of intrusion into the sinus (50.9%) followed by the palatal root (49.1%) then the distobuccal root (47.4%). However, the difference in both type of tooth and type of root was statistically non-significant (p = 0.051 and 0.869 respectively). As for the individual root with the highest probability of intrusion, the mesio-buccal root of the right third molar is the most frequent root to intrude the sinus (71.4%) and the mesio-buccal root of the right first molar is the least frequent (22.7%). Conclusions In a sample of the Egyptian population, males exhibit higher probability of root protrusion into the sinus than females. The side and type of tooth are of higher impact on the probability of its intrusion into the sinus compared to the type of root. Left second molars are at a higher risk of oroantral communications on surgical or endodontic procedures compared to other molars due to its highest probability of intrusion into the sinus.

scholarly journals Analisis gambaran histogramdan densitas kamar pulpa pada gigi suspek pulpitis reversibel dan ireversibel dengan menggunakan radiografi cone beam computed tomography (Histogram and density analysis of irreversible and reversible pulpitissuspected tooth using cone beam computed tomography radiography)

2014 ◽  
Vol 13 (2) ◽  
pp. 122
Author(s):  
Lusi Epsilawati ◽  
Suhardjo Sitam ◽  
Sam Belly ◽  
Fahmi Oscandar
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Secondary Data ◽  
Cone Beam ◽  
Pulp Chamber ◽  
Control Data ◽  
Density Analysis ◽  
The Right ◽  
Irreversible Pulpitis ◽  
Peak Value

Inflammation of the pulp is most common and difficult to diagnose. For it radiographs is necessary. One attempt to do is to assess its histogram and density. Radiography equipment that has the ability to analyze is cone beam computedtomography (CBCT). The purpose of this study is to analyze radiograph of the pulp chamber histogram: peak value,grayscale and trends, as well as the density on the condition reversible and irreversible pulpitis condition. The populationof this descriptive study is secondary data of CBCT-3D radiographs during 2012-2013. Selected sample of 75 data isreversible pulpitis, irreversible pulpitis 80 data, as well as 20 normal condition data as control. Data were analyzed byone way ANOVAand are presented in tables and graphs. The results showed that the value of the histogram under normalconditions showeda different significance for both the peak value of the reversible or irreversible pulpitis (p= 0.01). It isdifferent with a grayscale value, showed no significant different between normal with reversible pulpitis (p =0.997) and significantly different between normal and pulpitis reversible against pulpitis irrebversible (p= 0.03-0.01). There is a growing trend change is on the right direction of reversible and irreversible pulpitis. It was concluded that the irreversiblepulpitis, density and histogram shows the direction of more luscent compared with normal and reversible pulpitisconditions.

Sign in / Sign up

Export Citation Format

Share Document