scholarly journals Interactice comment on acp-2016-166 - "Model-based aviation advice on distal volcanic ash clouds by assimilating aircraft in-situ measurements"

2016 ◽  
Author(s):  
Anonymous
Keyword(s):  
Volcanic Ash ◽  
In Situ Measurements ◽  
Model Based

scholarly journals Status of the Tibetan Plateau observatory (Tibet-Obs) and a 10-year (2009–2019) surface soil moisture dataset

2020 ◽  
Author(s):  
Pei Zhang ◽  
Donghai Zheng ◽  
Rogier van der Velde ◽  
Jun Wen ◽  
Yijian Zeng ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Tibetan Plateau ◽  
Current Model ◽  
Regional Scale ◽  
In Situ Measurements ◽  
The Tibetan Plateau ◽  
Model Based ◽  
Network Area

Abstract. The Tibetan Plateau observatory of plateau scale soil moisture and soil temperature (Tibet-Obs) was established ten years ago, which has been widely used to calibrate/validate satellite- and model-based soil moisture (SM) products for their applications to the Tibetan Plateau (TP). This paper reports on the status of the Tibet-Obs and presents a 10-year (2009–2019) surface SM dataset produced based on in situ measurements taken at a depth of 5 cm collected from the Tibet-Obs that consists of three regional-scale SM monitoring networks, i.e. the Maqu, Naqu, and Ngari (including Ali and Shiquanhe) networks. This surface SM dataset includes the original 15-min in situ measurements collected by multiple SM monitoring sites of the three networks, and the spatially upscaled SM records produced for the Maqu and Shiquanhe networks. Comparisons between four spatial upscaling methods, i.e. arithmetic averaging, Voronoi diagram, time stability and apparent thermal inertia, show that the arithmetic average of the monitoring sites with long-term (i.e. ≥ six years) continuous measurements are found to be most suitable to produce the upscaled SM records. Trend analysis of the 10-year upscaled SM records using the Mann-Kendall method shows that the Maqu network area in the eastern part of the TP is drying while the Shiquanhe network area in the west is getting wet that generally follow the change of precipitation. To further demonstrate the uniqueness of the upscaled SM records in validating existing SM products for long term period (~ 10 years), comparisons are conducted to evaluate the reliability of three reanalysis datasets for the Maqu and Shiquanhe network areas. It is found that current model-based SM products still show deficiencies in representing the trend and variation of measured SM dynamics in the Tibetan grassland (i.e. Maqu) and desert ecosystems (i.e. Shiquanhe) that dominate the landscape of the TP. The dataset would be also valuable for calibrating/validating long-term satellite-based SM products, evaluation of SM upscaling methods, development of data fusion methods, and quantifying the coupling strength between precipitation and SM at 10-year scale. The dataset is available in the 4TU.ResearchData repository at https://doi.org/10.4121/uuid:21220b23-ff36-4ca9-a08f-ccd53782e834 (Zhang et al., 2020).

scholarly journals Status of the Tibetan Plateau observatory (Tibet-Obs) and a 10-year (2009–2019) surface soil moisture dataset

2021 ◽  
Vol 13 (6) ◽  
pp. 3075-3102
Author(s):  
Pei Zhang ◽  
Donghai Zheng ◽  
Rogier van der Velde ◽  
Jun Wen ◽  
Yijian Zeng ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Tibetan Plateau ◽  
Current Model ◽  
Regional Scale ◽  
In Situ Measurements ◽  
The Tibetan Plateau ◽  
Monitoring Networks ◽  
Model Based

Abstract. The Tibetan Plateau observatory (Tibet-Obs) of plateau scale soil moisture and soil temperature was established 10 years ago and has been widely used to calibrate/validate satellite- and model-based soil moisture (SM) products for their applications to the Tibetan Plateau (TP). This paper reports on the status of the Tibet-Obs and presents a 10-year (2009–2019) surface SM dataset produced based on in situ measurements taken at a depth of 5 cm collected from the Tibet-Obs that consists of three regional-scale SM monitoring networks, i.e. the Maqu, Naqu, and Ngari (including Ali and Shiquanhe) networks. This surface SM dataset includes the original 15 min in situ measurements collected by multiple SM monitoring sites of the three networks and the spatially upscaled SM records produced for the Maqu and Shiquanhe networks. Comparisons between four spatial upscaling methods – i.e. arithmetic averaging, Voronoi diagrams, time stability, and apparent thermal inertia – show that the arithmetic average of the monitoring sites with long-term (i.e. ≥ 6-year) continuous measurements is found to be most suitable to produce the upscaled SM records. Trend analysis of the 10-year upscaled SM records indicates that the Shiquanhe network in the western part of the TP is getting wet, while there is no significant trend found for the Maqu network in the east. To further demonstrate the uniqueness of the upscaled SM records in validating existing SM products for a long-term period (∼10 years), the reliability of three reanalysis datasets is evaluated for the Maqu and Shiquanhe networks. It is found that current model-based SM products still show deficiencies in representing the measured SM dynamics in the Tibetan grassland (i.e. Maqu) and desert ecosystems (i.e. Shiquanhe). The dataset would also be valuable for calibrating/validating long-term satellite-based SM products, evaluation of SM upscaling methods, development of data fusion methods, and quantifying the coupling of SM and precipitation at a 10-year scale. The dataset is available in the 4TU.ResearchData repository at https://doi.org/10.4121/12763700.v7 (Zhang et al., 2020).

scholarly journals The role of in-situ measurements of volcanic ash concentrations in preventing economic disasters due to volcanic ash clouds

2014 ◽  
Vol 4 (1) ◽  
pp. 48-60 ◽  
Author(s):  
Jonas Eliasson ◽  
◽  
Nario Yasuda ◽  
Konradin Weber ◽  
Andreas Vogel ◽  
...  
Keyword(s):  
Volcanic Ash ◽  
In Situ Measurements

scholarly journals Effects of microtopography on texture, temperature and heat flow in Arctic and sub-Arctic snow

1994 ◽  
Vol 19 ◽  
pp. 63-68 ◽  
Author(s):  
Matthew Sturm ◽  
Jonathan Holmgren
Keyword(s):  
Heat Flux ◽  
Heat Flow ◽  
Snow Depth ◽  
In Situ Measurements ◽  
Temperature Gradients ◽  
Substantial Fraction ◽  
Model Based ◽  
Vertical Heat ◽  
Lateral Temperature

Arctic and sub-Arctic snow is deposited on ground that can have significant microrelief due to tundra hummocks and tussocks. The microrelief, a substantial fraction of the total snow depth, causes basal layers of snow (usually depth hoar) to be discontinuous. In-situ measurements made at four locations in Alaska indicate lateral temperature gradients up to 60°C m−1exist at the snow/ground interface due to the microtopography. For all sites, the winter average range of temperature along a 1.5 m transect at the interface varied from 4°C to greater than 7°C. Heat-flux transducers placed at the tops and bases of tussocks indicated that vertical heat flow was consistently 1.4 to 2.1 times higher at the top than the base. Results of a conductive model based on tussock height are consistent with these measurements.

scholarly journals Model-based aviation advice on distal volcanic ash clouds by assimilating aircraft in situ measurements

2016 ◽  
Vol 16 (14) ◽  
pp. 9189-9200 ◽  
Author(s):  
Guangliang Fu ◽  
Arnold Heemink ◽  
Sha Lu ◽  
Arjo Segers ◽  
Konradin Weber ◽  
...  
Keyword(s):  
Volcanic Ash ◽  
Transport Model ◽  
Real Life ◽  
Forecast Accuracy ◽  
In Situ Measurements ◽  
Northwestern Part ◽  
Ash Plume ◽  
Potential Improvement ◽  
Ash Transport

Abstract. The forecast accuracy of distal volcanic ash clouds is important for providing valid aviation advice during volcanic ash eruption. However, because the distal part of volcanic ash plume is far from the volcano, the influence of eruption information on this part becomes rather indirect and uncertain, resulting in inaccurate volcanic ash forecasts in these distal areas. In our approach, we use real-life aircraft in situ observations, measured in the northwestern part of Germany during the 2010 Eyjafjallajökull eruption, in an ensemble-based data assimilation system combined with a volcanic ash transport model to investigate the potential improvement on the forecast accuracy with regard to the distal volcanic ash plume. We show that the error of the analyzed volcanic ash state can be significantly reduced through assimilating real-life in situ measurements. After a continuous assimilation, it is shown that the aviation advice for Germany, the Netherlands and Luxembourg can be significantly improved. We suggest that with suitable aircrafts measuring once per day across the distal volcanic ash plume, the description and prediction of volcanic ash clouds in these areas can be greatly improved.

scholarly journals Monitoring presence and streaming patterns of Icelandic volcanic ash during its arrival to Slovenia

2011 ◽  
Vol 8 (2) ◽  
pp. 3863-3898 ◽  
Author(s):  
F. Gao ◽  
S. Stanič ◽  
K. Bergant ◽  
T. Bolte ◽  
F. Coren ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Chemical Analysis ◽  
Atmospheric Aerosol ◽  
Volcanic Ash ◽  
Ground Level ◽  
In Situ Measurements ◽  
Volcanic Origin ◽  
Air Masses ◽  
X Ray

Abstract. The eruption of the Eyjafjallajökull volcano starting on 14 April 2010 resulted in the spreading of volcanic ash over most parts of Europe. In Slovenia, the presence of volcanic ash was monitored using ground-based in-situ measurements, lidar-based remote sensing and airborne in-situ measurements. Volcanic origin of the detected aerosols was confirmed by subsequent spectral and chemical analysis of the collected samples. The initial arrival of volcanic ash to Slovenia was detected at ground level using in-situ measurements during the night of 17 April 2010, but was not observed via lidar-based remote sensing due to the presence of clouds at lower altitudes while the streaming height of ash-loaded air masses was above 5 km a.s.l. The second arrival of volcanic ash on 20 April 2010 was detected by both lidar-based remote sensing and airborne in-situ measurement, revealing two or more elevated atmospheric aerosol layers above Slovenia. Identification of samples from ground-based in-situ and airborne in-situ measurements based on energy-dispersive X-ray spectroscopy confirmed that a fraction of particles was volcanic ash from the Eyjafjallajökull eruption. We performed simulations of airflow trajectories to explain the arrival of the air masses containing volcanic ash to Slovenia.

scholarly journals Model-based aviation advice on distal volcanic ash clouds by assimilating aircraft in-situ measurements

2016 ◽  
Author(s):  
G. Fu ◽  
A. W. Heemink ◽  
S. Lu ◽  
A. J. Segers ◽  
K. Weber ◽  
...  
Keyword(s):  
Volcanic Ash ◽  
Transport Model ◽  
Real Life ◽  
Forecast Accuracy ◽  
In Situ Measurements ◽  
North West ◽  
The North ◽  
Ash Plume ◽  
Potential Improvement

Abstract. The forecast accuracy of distal volcanic ash clouds is important for providing valid aviation advice during volcanic ash eruption. However, because the distal part of volcanic ash plume is far from the volcano, the influence of eruption information on this part becomes rather indirect and uncertain, resulting in inaccurate volcanic ash forecasts in these distal areas. In our approach, we use real-life aircraft in-situ observations, measured in the North-West part of Germany during the 2010 Eyjafjallajokull eruption, in an ensemble-based data assimilation system combined with a volcanic ash transport model to investigate the potential improvement on the forecast accuracy with regard to the distal volcanic ash plume. We show that the error of the analyzed volcanic ash state can be significantly reduced through assimilating real-life in-situ measurements. After a continuous assimilation, it is shown that the aviation advice for Germany, the Netherlands and Belgium can be significantly improved. We suggest that with suitable aircrafts measuring once per day across the distal volcanic ash plume, the description and prediction of volcanic ash clouds in these areas can be greatly improved.

scholarly journals Effects of microtopography on texture, temperature and heat flow in Arctic and sub-Arctic snow

1994 ◽  
Vol 19 ◽  
pp. 63-68 ◽  
Author(s):  
Matthew Sturm ◽  
Jonathan Holmgren
Keyword(s):  
Heat Flux ◽  
Heat Flow ◽  
Snow Depth ◽  
In Situ Measurements ◽  
Temperature Gradients ◽  
Substantial Fraction ◽  
Model Based ◽  
Vertical Heat ◽  
Lateral Temperature

Arctic and sub-Arctic snow is deposited on ground that can have significant microrelief due to tundra hummocks and tussocks. The microrelief, a substantial fraction of the total snow depth, causes basal layers of snow (usually depth hoar) to be discontinuous. In-situ measurements made at four locations in Alaska indicate lateral temperature gradients up to 60°C m −1 exist at the snow/ground interface due to the microtopography. For all sites, the winter average range of temperature along a 1.5 m transect at the interface varied from 4°C to greater than 7°C. Heat-flux transducers placed at the tops and bases of tussocks indicated that vertical heat flow was consistently 1.4 to 2.1 times higher at the top than the base. Results of a conductive model based on tussock height are consistent with these measurements.

Sign in / Sign up

Export Citation Format

Share Document