scholarly journals Direct SW aerosol radiative forcing over Portugal

2008 ◽  
Vol 8 (19) ◽  
pp. 5771-5786 ◽  
Author(s):  
D. Santos ◽  
M. J. Costa ◽  
A. M. Silva
Keyword(s):  
Radiative Transfer ◽  
Forest Fire ◽  
Radiative Forcing ◽  
Solar Spectrum ◽  
Average Surface ◽  
Aerosol Radiative Forcing ◽  
Desert Dust ◽  
Dust Aerosols ◽  
Average Value ◽  
Aerosol Radiative

Abstract. In this work, the evaluation of the aerosol radiative forcing at the top of the atmosphere as well as at the surface over the south of Portugal is made, particularly in the regions of Évora (38°34' N, 7°54' W) and of Cabo da Roca (38°46' N, 9°38' W), during years 2004 and 2005. The radiative transfer calculations, using the radiative transfer code Second Simulation of the Satellite Signal in the Solar Spectrum (6S), combine ground-based measurements, from Aerosol Robotic NETwork (AERONET), and satellite measurements, from MODerate Imaging Spectroradiometer (MODIS), to estimate the direct SW aerosol radiative forcing. The method developed to retrieve the surface spectral reflectance is also presented, based on ground-based measurements (AERONET) of the aerosol optical properties combined with the satellite-measured radiances (MODIS). The instantaneous direct SW aerosol radiative forcing values obtained at the top of the atmosphere are, in the majority of the cases, negative, indicating a tendency for cooling the Earth at the top of the atmosphere. For Desert Dust aerosols, over the Évora land region, the average forcing efficiency is estimated to be −25 Wm−2/AOT0.55 whereas for the Cabo da Roca area, the average forcing efficiency is −46 Wm−2/AOT0.55. In the presence of Forest Fire aerosols, both from short and long distances, the average value of forcing efficiency at the top of the atmosphere over Cabo da Roca is found to be −28 Wm−2/AOT0.55 and, over Évora, −27 Wm−2/AOT0.55. For specific situations, discussed in this work, the average surface direct SW aerosol radiative forcing efficiency due to the Desert Dust aerosols, in Évora region, is −66 Wm−2/AOT0.55, whereas in Cabo da Roca region, the corresponding average value is −38 Wm−2/AOT0.55. Considering the Forest Fire aerosols, over Évora region, the average surface direct SW aerosol radiative forcing efficiency can vary between −36 and −113 Wm−2/AOT0.55, the more negative value corresponding to forest fire aerosols coming only from shorter distances.

scholarly journals Direct SW aerosol radiative forcing over Portugal

2008 ◽  
Vol 8 (3) ◽  
pp. 8585-8628 ◽  
Author(s):  
D. Santos ◽  
M. J. Costa ◽  
A. M. Silva
Keyword(s):  
Forest Fires ◽  
Spectral Reflectance ◽  
Radiative Forcing ◽  
Longwave Radiation ◽  
Single Scattering ◽  
Single Scattering Albedo ◽  
Aerosol Radiative Forcing ◽  
Desert Dust ◽  
Average Value ◽  
Aerosol Radiative

Abstract. The estimation of radiative forcing due to desert dust and forest fires aerosols is a very important issue since these particles are very efficient at scattering and absorbing both short and longwave radiation. In this work, the evaluation of the aerosol radiative forcing at the top of the atmosphere over the south of Portugal is made, particularly in the regions of Évora and of Cabo da Roca. The radiative transfer calculations combine ground-based and satellite measurements, to estimate the top of the atmosphere direct SW aerosol radiative forcing. The method developed to retrieve the surface spectral reflectance is also presented, based on ground-based measurements of the aerosol optical properties combined with the satellite-measured radiances. The aerosol direct radiative effect is shown to be very sensitive to the underlying surface, since different surface spectral reflectance values may originate different forcing values. The results obtained also illustrate the importance of considering the actual aerosol properties, in this case measured by ground-based instrumentation, particularly the aerosol single scattering albedo, because different aerosol single scattering albedo values can flip the sign of the direct SW aerosol radiative forcing. The instantaneous direct SW aerosol radiative forcing values obtained at the top of the atmosphere are, in the majority of the cases, negative, indicating a tendency for cooling the Earth. For Desert Dust aerosols, over Évora land region, the average forcing efficiency is estimated to be −25 W/m2/AOT0.55 whereas for Cabo da Roca area, the average forcing efficiency is −46 W/m2/AOT0.55. In the presence of Forest Fire aerosols, over Cabo da Roca region, the average value of forcing efficiency is −28 W/m2/AOT0.55 and over Évora region an average value of −33 W/m2/AOT0.55 is found.

scholarly journals Aerosol radiative forcing during African desert dust events (2005–2010) over South-Eastern Spain

2012 ◽  
Vol 12 (3) ◽  
pp. 6593-6622 ◽  
Author(s):  
A. Valenzuela ◽  
F. J. Olmo ◽  
H. Lyamani ◽  
M. Antón ◽  
A. Quirantes ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Radiative Forcing ◽  
Single Scattering ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Aerosol Radiative Forcing ◽  
Desert Dust ◽  
Aerosol Parameter ◽  
Dust Events ◽  
Aerosol Radiative

Abstract. The instantaneous values of the aerosol radiative forcing (ARF) at the surface and the top of the atmosphere (TOA) were calculated during desert dust events occurred at Granada (Southeastern Spain) from 2005 to 2010. For that, the SBDART radiative transfer model was utilized to simulate the global irradiance values (0.3–2.8 μm) at the surface and TOA using as input the aerosol properties derived from a CIMEL sun-photometer measurements and an inversion methodology that uses the sky radiance measurements in principal plane configuration and non-spherical particle shapes approximation. The SBDART modeled global irradiances at surface have been successfully validated against experimental measurements obtained by CM-11 pyranometer, indicating the reliability of the radiative transfer model used in this work for the ARF calculations. The monthly ARF values at surface ranged from −32 W m−2 to −46 W m−2, being larger in April and July than in the rest of months. The seasonal ARF evolution was inconsistent with seasonal aerosol optical depth (AOD) variation due to the effects induced by other aerosol parameter such as the single scattering albedo. The ARF at TOA changed from −9 W m−2 to −29 W m−2. Thus, the atmospheric ARF values (ARF at TOA minus ARF at surface) ranged from +15 to +35 W m−2. These results suggest that the African dust caused local atmospheric heating over the study location. The instantaneous aerosol radiative forcing efficiency (ARFE), aerosol radiative forcing per unit of AOD (440 nm), at surface and TOA during African desert dust events was evaluated according to the desert dust source origins. The ARFE values at surface were relatively high (in absolute term) and were −157 ± 20 (Sector A), −154 ± 23 (Sector B), and −147 ± 23 (Sector C) W m−2. These values were larger than many of the values found in literature which could be due to the presence of more absorbing atmospheric particles during African desert dust intrusions over our study area. Finally, our ARF computations showed good agreement with the corresponding ARF calculated by AERONET network.

scholarly journals Intercomparison of shortwave radiative transfer schemes in global aerosol modeling: results from the AeroCom Radiative Transfer Experiment

2012 ◽  
Vol 12 (12) ◽  
pp. 32631-32706 ◽  
Author(s):  
C. A. Randles ◽  
S. Kinne ◽  
G. Myhre ◽  
M. Schulz ◽  
P. Stier ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Multiple Scattering ◽  
Radiative Forcing ◽  
Model Performance ◽  
Aerosol Radiative Forcing ◽  
Aerosol Forcing ◽  
Aerosol Absorption ◽  
Relative Standard ◽  
Aerosol Modeling ◽  
Aerosol Radiative

Abstract. In this study we examine the performance of 31 global model radiative transfer schemes in cloud-free conditions with prescribed gaseous absorbers and no aerosols (Rayleigh atmosphere), with prescribed scattering-only aerosols, and with more absorbing aerosols. Results are compared to benchmark results from high-resolution, multi-angular line-by-line radiation models. For purely scattering aerosols, model bias relative to the line-by-line models in the top-of-the atmosphere aerosol radiative forcing ranges from roughly −10 to 20%, with over- and underestimates of radiative cooling at higher and lower sun elevation, respectively. Inter-model diversity (relative standard deviation) increases from ~10 to 15% as sun elevation increases. Inter-model diversity in atmospheric and surface forcing decreases with increased aerosol absorption, indicating that the treatment of multiple-scattering is more variable than aerosol absorption in the models considered. Aerosol radiative forcing results from multi-stream models are generally in better agreement with the line-by-line results than the simpler two-stream schemes. Considering radiative fluxes, model performance is generally the same or slightly better than results from previous radiation scheme intercomparisons. However, the inter-model diversity in aerosol radiative forcing remains large, primarily as a result of the treatment of multiple-scattering. Results indicate that global models that estimate aerosol radiative forcing with two-stream radiation schemes may be subject to persistent biases introduced by these schemes, particularly for regional aerosol forcing.

scholarly journals Dust aerosol radiative effects during summer 2012 simulated with a coupled regional aerosol–atmosphere–ocean model over the Mediterranean

2015 ◽  
Vol 15 (6) ◽  
pp. 3303-3326 ◽  
Author(s):  
P. Nabat ◽  
S. Somot ◽  
M. Mallet ◽  
M. Michou ◽  
F. Sevault ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Mediterranean Region ◽  
Short Wave ◽  
Ocean Model ◽  
Dust Particles ◽  
Radiative Effects ◽  
Aerosol Radiative Forcing ◽  
Dust Aerosols ◽  
The Mediterranean ◽  
Aerosol Radiative

Abstract. The present study investigates the radiative effects of dust aerosols in the Mediterranean region during summer 2012 using a coupled regional aerosol–atmosphere–ocean model (CNRM-RCSM5). A prognostic aerosol scheme, including desert dust, sea salt, organic, black-carbon and sulphate particles, has been integrated to CNRM-RCSM5 in addition to the atmosphere, land surface and ocean components. An evaluation of this aerosol scheme of CNRM-RCSM5, and especially of the dust aerosols, has been performed against in situ and satellite measurements, showing its ability to reproduce the spatial and temporal variability of aerosol optical depth (AOD) over the Mediterranean region in summer 2012. The dust vertical and size distributions have also been evaluated against observations from the TRAQA/ChArMEx campaign. Three simulations have been carried out for summer 2012 with CNRM-RCSM5, including the full prognostic aerosol scheme, only monthly-averaged AOD means from the aerosol scheme or no aerosols at all, in order to focus on the radiative effects of dust particles and the role of the prognostic scheme. Surface short-wave aerosol radiative forcing variability is found to be more than twice as high over regions affected by dust aerosols, when using a prognostic aerosol scheme instead of monthly AOD means. In this case downward surface solar radiation is also found to be better reproduced according to a comparison with several stations across the Mediterranean. A composite study over 14 stations across the Mediterranean, designed to identify days with high dust AOD, also reveals the improvement of the representation of surface temperature brought by the use of the prognostic aerosol scheme. Indeed the surface receives less radiation during dusty days, but only the simulation using the prognostic aerosol scheme is found to reproduce the observed intensity of the dimming and warming on dusty days. Moreover, the radiation and temperature averages over summer 2012 are also modified by the use of prognostic aerosols, mainly because of the differences brought in short-wave aerosol radiative forcing variability. Therefore this first comparison over summer 2012 highlights the importance of the choice of the representation of aerosols in climate models.

scholarly journals Intercomparison of shortwave radiative transfer schemes in global aerosol modeling: results from the AeroCom Radiative Transfer Experiment

2013 ◽  
Vol 13 (5) ◽  
pp. 2347-2379 ◽  
Author(s):  
C. A. Randles ◽  
S. Kinne ◽  
G. Myhre ◽  
M. Schulz ◽  
P. Stier ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Multiple Scattering ◽  
Zenith Angle ◽  
Radiative Forcing ◽  
Solar Zenith Angle ◽  
Aerosol Radiative Forcing ◽  
Aerosol Absorption ◽  
Relative Standard ◽  
Aerosol Modeling ◽  
Aerosol Radiative

Abstract. In this study we examine the performance of 31 global model radiative transfer schemes in cloud-free conditions with prescribed gaseous absorbers and no aerosols (Rayleigh atmosphere), with prescribed scattering-only aerosols, and with more absorbing aerosols. Results are compared to benchmark results from high-resolution, multi-angular line-by-line radiation models. For purely scattering aerosols, model bias relative to the line-by-line models in the top-of-the atmosphere aerosol radiative forcing ranges from roughly −10 to 20%, with over- and underestimates of radiative cooling at lower and higher solar zenith angle, respectively. Inter-model diversity (relative standard deviation) increases from ~10 to 15% as solar zenith angle decreases. Inter-model diversity in atmospheric and surface forcing decreases with increased aerosol absorption, indicating that the treatment of multiple-scattering is more variable than aerosol absorption in the models considered. Aerosol radiative forcing results from multi-stream models are generally in better agreement with the line-by-line results than the simpler two-stream schemes. Considering radiative fluxes, model performance is generally the same or slightly better than results from previous radiation scheme intercomparisons. However, the inter-model diversity in aerosol radiative forcing remains large, primarily as a result of the treatment of multiple-scattering. Results indicate that global models that estimate aerosol radiative forcing with two-stream radiation schemes may be subject to persistent biases introduced by these schemes, particularly for regional aerosol forcing.

Sign in / Sign up

Export Citation Format

Share Document