scholarly journals SPATIOLTEMPORAL MODELING THE IMPACT OF SURFACE CHARACTERISTICS VARIATIONS ON LAND SURFACE TEMPERATURE VARIATIONS: A CASE STUDY OF SAMALGHAN VALLY

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 401-405
Author(s):  
M. K. Firozjaei ◽  
M. Makki ◽  
J. Lentschke ◽  
M. Kiavarz ◽  
S. K. Alavipanah
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Incident Angle ◽  
Surface Characteristics ◽  
Slope Aspect ◽  
Biophysical Parameters ◽  
The Impact

Abstract. Spatiotemporal mapping and modeling of Land Surface Temperature (LST) variations and characterization of parameters affecting these variations are of great importance in various environmental studies. The aim of this study is a spatiotemporal modeling the impact of surface characteristics variations on LST variations for the studied area in Samalghan Valley. For this purpose, a set of satellite imagery and meteorological data measured at the synoptic station during 1988–2018, were used. First, single-channel algorithm, Tasseled Cap Transformation (TCT) and Biophysical Composition Index (BCI) were employed to estimate LST and surface biophysical parameters including brightness, greenness and wetness and BCI. Also, spatial modeling was used to modeling of terrain parameters including slope, aspect and local incident angle based on DEM. Finally, the principal component analysis (PCA) and the Partial Least Squares Regression (PLSR) were used to modeling and investigate the impact of surface characteristics variations on LST variations. The results indicated that surface characteristics vary significantly for case study in spatial and temporal dimensions. The correlation coefficient between the PC1 of LST and PC1s of brightness, greenness, wetness, BCI, DEM, and solar local incident angle were 0.65, −0.67, −0.56, 0.72, −0.43 and 0.53, respectively. Furthermore, the coefficient coefficient and RMSE between the observed LST variation and modelled LST variation based on PC1s of brightness, greenness, wetness, BCI, DEM, and local incident angle were 0.83 and 0.14, respectively. The results of study indicated the LST variation is a function of s terrain and surface biophysical parameters variations.

scholarly journals A PCA–OLS Model for Assessing the Impact of Surface Biophysical Parameters on Land Surface Temperature Variations

2019 ◽  
Vol 11 (18) ◽  
pp. 2094 ◽  
Author(s):  
Firozjaei ◽  
Alavipanah ◽  
Liu ◽  
Sedighi ◽  
Mijani ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Correlation Coefficient ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Vegetation Index ◽  
Single Channel ◽  
Ordinary Least Squares ◽  
Spatiotemporal Variations ◽  
Biophysical Parameters ◽  
The Impact

Analysis of land surface temperature (LST) spatiotemporal variations and characterization of the factors affecting these variations are of great importance in various environmental studies and applications. The aim of this study is to propose an integrated model for characterizing LST spatiotemporal variations and for assessing the impact of surface biophysical parameters on the LST variations. For this purpose, a case study was conducted in Babol City, Iran, during the period of 1985 to 2018. We used 122 images of Landsat 5, 7, and 8, and products of water vapor (MOD07) and daily LST (MOD11A1) from the MODIS sensor of the Terra satellite, as well as soil and air temperature and relative humidity data measured at the local meteorological station over 112 dates for the study. First, a single-channel algorithm was applied to estimate LST, while various spectral indices were computed to represent surface biophysical parameters, which included the normalized difference vegetation index (NDVI), soil-adjusted vegetation index (SAVI), normalized difference water index (NDWI), normalized difference built-up index (NDBI), albedo, brightness, greenness, and wetness from tasseled cap transformation. Next, a principal component analysis (PCA) was conducted to determine the degree of LST variation and the surface biophysical parameters in the temporal dimension at the pixel scale based on Landsat imagery. Finally, the relationship between the first component of the PCA of LST and each surface biophysical parameter was investigated by using the ordinary least squares (OLS) regression with both regional and local optimizations. The results indicated that among the surface biophysical parameters, variations of NDBI, wetness, and greenness had the highest impact on the LST variations with a correlation coefficient of 0.75, −0.70, and −0.44, and RMSE of 0.71, 1.03, and 1.06, respectively. The impact of NDBI, wetness, and greenness varied geographically, but their variations accounted for 43%, 38%, and 19% of the LST variation, respectively. Furthermore, the correlation coefficient and RMSE between the observed LST variation and modeled LST variation, based on the most influential biophysical factors (NDBI, wetness, and greenness) yielded 0.85 and 1.06 for the regional approach and 0.93 and 0.26 for the local approach, respectively. The results of this study indicated the use of an integrated PCA–OLS model was effective for modeling of various environmental parameters and their relationship with LST. In addition, the PCA–OLS with the local optimization was found to be more efficient than the one with the regional optimization.

scholarly journals A Comparative Analysis of Retrieval Algorithms of Land Surface Temperature from Landsat-8 Data: A Case Study of Shanghai, China

2021 ◽  
Vol 18 (11) ◽  
pp. 5659
Author(s):  
Yue Jiang ◽  
WenPeng Lin
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Remote Sensing Data ◽  
Landsat 8 ◽  
Thermal Infrared Remote Sensing ◽  
Retrieval Algorithms ◽  
Split Window Algorithm

In the trend of global warming and urbanization, frequent extreme weather has a severe impact on the lives of citizens. Land Surface Temperature (LST) is an essential climate variable and a vital parameter for land surface processes at local and global scales. Retrieving LST from global, regional, and city-scale thermal infrared remote sensing data has unparalleled advantages and is one of the most common methods used to study urban heat island effects. Different algorithms have been developed for retrieving LST using satellite imagery, such as the Radiative Transfer Equation (RTE), Mono-Window Algorithm (MWA), Split-Window Algorithm (SWA), and Single-Channel Algorithm (SCA). A case study was performed in Shanghai to evaluate these existing algorithms in the retrieval of LST from Landsat-8 images. To evaluate the estimated LST accurately, measured data from meteorological stations and the MOD11A2 product were used for validation. The results showed that the four algorithms could achieve good results in retrieving LST, and the LST retrieval results were generally consistent within a spatial scale. SWA is more suitable for retrieving LST in Shanghai during the summer, a season when the temperature and the humidity are both very high in Shanghai. Highest retrieval accuracy could be seen in cultivated land, vegetation, wetland, and water body. SWA was more sensitive to the error caused by land surface emissivity (LSE). In low temperature and a dry winter, RTE, SWA, and SCA are relatively more reliable. Both RTE and SCA were sensitive to the error caused by atmospheric water vapor content. These results can provide a reasonable reference for the selection of LST retrieval algorithms for different periods in Shanghai.

scholarly journals The Impact of Urban Renewal on Land Surface Temperature Changes: A Case Study in the Main City of Guangzhou, China

2020 ◽  
Vol 12 (5) ◽  
pp. 794 ◽  
Author(s):  
Zhi Qiao ◽  
Luo Liu ◽  
Yuanwei Qin ◽  
Xinliang Xu ◽  
Binwu Wang ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Urban Renewal ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Time Series Data ◽  
Single Channel ◽  
Remote Sensing Data ◽  
Urban Land ◽  
Series Data ◽  
The Impact

To improve land use efficiency, urban renewal must also consider urban microclimates and heat islands. Existing research has depended on manual interpretation of high-resolution optical satellite imagery to resolve land surface temperature (LST) changes caused by urban renewal; however, the acquired ground time series data tend to be uneven and unique to specific frameworks. The objective of this study was to establish a more general framework to study LST changes caused by urban renewal using multi-source remote sensing data. Specifically, urban renewal areas during 2007–2017 were obtained by integrating Landsat and yearly Phased Array type L-band Synthetic Aperture Radar (PALSAR) images, and LST was retrieved from Landsat thermal infrared data using the generalized single-channel algorithm. Our results showed that urban renewal land (URL) area accounted for 1.88% of urban land area. Relative LST between URL and general urban land (GUL) of Liwan, Yuexiu, Haizhu, and Tianhe districts dropped by 0.88, 0.42, 0.43, and 0.10 K, respectively, whereas those of Baiyun, Huangpu, Panyu, and Luogang districts presented opposite characteristics, with a rise in the LST of 0.98, 1.03, 1.63, and 2.11 K, respectively. These results are attributable to population density, building density, and landscape pattern changes during the urban renewal process.

scholarly journals The Gradient Effect on the Relationship between the Underlying Factor and Land Surface Temperature in Large Urbanized Region

Land ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 20
Author(s):  
Yixu Wang ◽  
Mingxue Xu ◽  
Jun Li ◽  
Nan Jiang ◽  
Dongchuan Wang ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Landscape Planning ◽  
Potential Gradient ◽  
Surface Characteristics ◽  
Ordinary Least Squares ◽  
Urban Agglomeration ◽  
Spatial Gradient ◽  
Gradient Effect

Although research relating to the urban heat island (UHI) phenomenon has been significantly increasing in recent years, there is still a lack of a continuous and clear recognition of the potential gradient effect on the UHI—landscape relationship within large urbanized regions. In this study, we chose the Beijing-Tianjin-Hebei (BTH) region, which is a large scaled urban agglomeration in China, as the case study area. We examined the causal relationship between the LST variation and underlying surface characteristics using multi-temporal land cover and summer average land surface temperature (LST) data as the analyzed variables. This study then further discussed the modeling performance when quantifying their relationship from a spatial gradient perspective (the grid size ranged from 6 to 24 km), by comparing the ordinary least squares (OLS) and geographically weighted regression (GWR) methods. The results indicate that: (1) both the OLS and GWR analysis confirmed that the composition of built-up land contributes as an essential factor that is responsible for the UHI phenomenon in a large urban agglomeration region; (2) for the OLS, the modeled relationship between the LST and its drive factor showed a significant spatial gradient effect, changing with different spatial analysis grids; and, (3) in contrast, using the GWR model revealed a considerably robust and better performance for accommodating the spatial non-stationarity with a lower scale dependence than that of the OLS model. This study highlights the significant spatial heterogeneity that is related to the UHI effect in large-extent urban agglomeration areas, and it suggests that the potential gradient effect and uncertainty induced by different spatial scale and methodology usage should be considered when modeling the UHI effect with urbanization. This would supplement current UHI study and be beneficial for deepening the cognition and enlightenment of landscape planning for UHI regulation.

Sign in / Sign up

Export Citation Format

Share Document