scholarly journals A Comparative Analysis of Retrieval Algorithms of Land Surface Temperature from Landsat-8 Data: A Case Study of Shanghai, China

2021 ◽  
Vol 18 (11) ◽  
pp. 5659
Author(s):  
Yue Jiang ◽  
WenPeng Lin
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Remote Sensing Data ◽  
Landsat 8 ◽  
Thermal Infrared Remote Sensing ◽  
Retrieval Algorithms ◽  
Split Window Algorithm

In the trend of global warming and urbanization, frequent extreme weather has a severe impact on the lives of citizens. Land Surface Temperature (LST) is an essential climate variable and a vital parameter for land surface processes at local and global scales. Retrieving LST from global, regional, and city-scale thermal infrared remote sensing data has unparalleled advantages and is one of the most common methods used to study urban heat island effects. Different algorithms have been developed for retrieving LST using satellite imagery, such as the Radiative Transfer Equation (RTE), Mono-Window Algorithm (MWA), Split-Window Algorithm (SWA), and Single-Channel Algorithm (SCA). A case study was performed in Shanghai to evaluate these existing algorithms in the retrieval of LST from Landsat-8 images. To evaluate the estimated LST accurately, measured data from meteorological stations and the MOD11A2 product were used for validation. The results showed that the four algorithms could achieve good results in retrieving LST, and the LST retrieval results were generally consistent within a spatial scale. SWA is more suitable for retrieving LST in Shanghai during the summer, a season when the temperature and the humidity are both very high in Shanghai. Highest retrieval accuracy could be seen in cultivated land, vegetation, wetland, and water body. SWA was more sensitive to the error caused by land surface emissivity (LSE). In low temperature and a dry winter, RTE, SWA, and SCA are relatively more reliable. Both RTE and SCA were sensitive to the error caused by atmospheric water vapor content. These results can provide a reasonable reference for the selection of LST retrieval algorithms for different periods in Shanghai.

scholarly journals Estimation of Land Surface Temperature in an Agricultural Region of Bangladesh from Landsat 8: Intercomparison of Four Algorithms

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1778 ◽  
Author(s):  
Md Qutub Uddin Sajib ◽  
Tao Wang
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Cross Validation ◽  
Single Channel ◽  
Landsat 8 ◽  
Atmospheric Parameters ◽  
Moderate Resolution ◽  
Split Window Algorithm

The presence of two thermal bands in Landsat 8 brings the opportunity to use either one or both of these bands to retrieve Land Surface Temperature (LST). In order to compare the performances of existing algorithms, we used four methods to retrieve LST from Landsat 8 and made an intercomparison among them. Apart from the direct use of the Radiative Transfer Equation (RTE), Single-Channel Algorithm and two Split-Window Algorithms were used taking an agricultural region in Bangladesh as the study area. The LSTs retrieved in the four methods were validated in two ways: first, an indirect validation against reference LST, which was obtained in the Atmospheric and Topographic CORection (ATCOR) software module; second, cross-validation with Terra MODerate Resolution Imaging Spectroradiometer (MODIS) daily LSTs that were obtained from the Application for Extracting and Exploring Analysis Ready Samples (A ρ ρ EEARS) online tool. Due to the absence of LST-monitoring radiosounding instruments surrounding the study area, in situ LSTs were not available; hence, validation of satellite retrieved LSTs against in situ LSTs was not performed. The atmospheric parameters necessary for the RTE-based method, as well as for other methods, were calculated from the National Centers for Environmental Prediction (NCEP) database using an online atmospheric correction calculator with MODerate resolution atmospheric TRANsmission (MODTRAN) codes. Root-mean-squared-error (RMSE) against reference LST, as well as mean bias error against both reference and MODIS daily LSTs, was used to interpret the relative accuracy of LST results. All four methods were found to result in acceptable LST products, leaving atmospheric water vapor content (w) as the important determinant for the precision result. Considering a set of several Landsat 8 images of different dates, Jiménez-Muñoz et al.’s (2014) Split-Window algorithm was found to result in the lowest mean RMSE of 1.19 ° C . Du et al.’s (2015) Split-Window algorithm resulted in mean RMSE of 1.50 ° C . The RTE-based direct method and the Single-Channel algorithm provided the mean RMSE of 2.47 ° C and 4.11 ° C , respectively. For Du et al.’s algorithm, the w range of 0.0 to 6.3 g cm−2 was considered, whereas for the other three methods, w values as retrieved from the NCEP database were considered for corresponding images. Land surface emissivity was retrieved through the Normalized Difference Vegetation Index (NDVI)-threshold method. This intercomparison study provides an LST retrieval methodology for Landsat 8 that involves four algorithms. It proves that (i) better LST results can be obtained using both thermal bands of Landsat 8; (ii) the NCEP database can be used to determine atmospheric parameters using the online calculator; (iii) MODIS daily LSTs from A ρ ρ EEARS can be used efficiently in cross-validation and intercomparison of Landsat 8 LST algorithms; and (iv) when in situ LST data are not available, the ATCOR-derived LSTs can be used for indirect verification and intercomparison of Landsat 8 LST algorithms.

scholarly journals Comparison of Three Algorithms for the Retrieval of Land Surface Temperature from Landsat 8 Images

Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 5049 ◽  
Author(s):  
Lei Wang ◽  
Yao Lu ◽  
Yunlong Yao
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Atmospheric Temperature ◽  
Landsat 8 ◽  
Input Parameters ◽  
Successful Launch ◽  
Urban Heat ◽  
Split Window Algorithm

The successful launch of the Landsat 8 satellite provides important data for the monitoring of urban heat island effects. Since the Landsat 8 TIRS data has two thermal infrared bands, it is suitable for many algorithms to retrieve the land surface temperature (LST). However, the selection of algorithms for retrieving the LST, the acquisition of algorithm input parameters, and the verification of the results are problems without obvious solutions. Taking Changchun City as an example, this paper used the mono-window algorithm (MWA), the split window algorithm (SWA), and the single-channel (SC) method to extract the LST from the Landsat 8 image and compared the three algorithms in terms of input parameters, accuracy, and sensitivity. The results show that all three algorithms can achieve good results in retrieving the LST. The SWA is the least sensitive to the error of the input parameters. The MWA and the SC method are sensitive to the error of the input parameters, and compared with the error of the LSE, these two algorithms are more sensitive to the error of atmospheric water vapor content. In addition, the MWA is also very sensitive to the error of the effective mean atmospheric temperature.

scholarly journals Retrieval of Land Surface Temperature From Landsat 8 Data of the Dandong-liaoyang Geothermal Area

2020 ◽  
Author(s):  
Yiming Luan
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Fossil Fuels ◽  
Hot Springs ◽  
Atmospheric Correction ◽  
Remote Sensing Data ◽  
Landsat 8 ◽  
Geothermal Resources ◽  
Thermal Infrared Remote Sensing

Abstract In recent years, with the intensification of problems like the depletion of traditional fossil fuels and environmental degradation, the development of new energy sources has become a key long-term strategy in China. Geothermal energy has attracted much attention due to its advantages of abundance and low environmental impact. Based on infrared data sensed remotely by the Landsat 8 satellite, this paper reports a verification of the atmospheric-correction method for extracting the surface temperature of the Dandong-Liaoyang geothermal region in all months of 2014. The method combines the abnormal points in the inversion results with the local sites of hot springs, structures, local historical air temperatures, and land surface temperature/emissivity data (MOD11_L2). Results showed that these data sources were spatially distributed in similar ways, which indicates that these results can be used to identify promising geothermal resources from publically available thermal-infrared remote-sensing data.

scholarly journals Land Surface Temperature Retrieval from Landsat 5, 7, and 8 over Rural Areas: Assessment of Different Retrieval Algorithms and Emissivity Models and Toolbox Implementation

2020 ◽  
Vol 12 (2) ◽  
pp. 294 ◽  
Author(s):  
Aliihsan Sekertekin ◽  
Stefania Bonafoni
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Thematic Mapper ◽  
Surface Radiation ◽  
Radiation Budget ◽  
Bias Error ◽  
Landsat 8 ◽  
Retrieval Algorithms

Land Surface Temperature (LST) is an important parameter for many scientific disciplines since it affects the interaction between the land and the atmosphere. Many LST retrieval algorithms based on remotely sensed images have been introduced so far, where the Land Surface Emissivity (LSE) is one of the main factors affecting the accuracy of the LST estimation. The aim of this study is to evaluate the performance of LST retrieval methods using different LSE models and data of old and current Landsat missions. Mono Window Algorithm (MWA), Radiative Transfer Equation (RTE) method, Single Channel Algorithm (SCA) and Split Window Algorithm (SWA) were assessed as LST retrieval methods processing data of Landsat missions (Landsat 5, 7 and 8) over rural pixels. Considering the LSE models introduced in the literature, different Normalized Difference Vegetation Index (NDVI)-based LSE models were investigated in this study. Specifically, three LSE models were considered for the LST estimation from Landsat 5 Thematic Mapper (TM) and seven Enhanced Thematic Mapper Plus (ETM+), and six for Landsat 8. For the accurate evaluation of the estimated LST, in-situ LST data were obtained from the Surface Radiation Budget Network (SURFRAD) stations. In total, forty-five daytime Landsat images; fifteen images for each Landsat mission, acquired in the Spring-Summer-Autumn period in the mid-latitude region in the Northern Hemisphere were acquired over five SURFRAD rural sites. After determining the best LSE model for the study case, firstly, the LST retrieval accuracy was evaluated considering the sensor type: when using Landsat 5 TM, 7 ETM+, and 8 Operational Land Imager (OLI), and Thermal Infrared Sensor (TIRS) data separately, RTE, MWA, and MWA presented the best results, respectively. Then, the performance was evaluated independently of the sensor types. In this case, all LST methods provided satisfying results, with MWA having a slightly better accuracy with a Root Mean Square Error (RMSE) equals to 2.39 K and a lower bias error. In addition, the spatio-temporal and seasonal analyses indicated that RTE and SCA presented similar results regardless of the season, while MWA differed from RTE and SCA for all seasons, especially in summer. To efficiently perform this work, an ArcGIS toolbox, including all the methods and models analyzed here, was implemented and provided as a user facility for the LST retrieval from Landsat data.

scholarly journals The Optimum Method for Urban Land Surface Temperature Estimation

2020 ◽  
Author(s):  
Ekkaluk Salakkham ◽  
Pantip Piyatadsananon
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Landsat 8 ◽  
Optimal Method ◽  
Temperature Estimation ◽  
Retrieval Method ◽  
Window Method ◽  
Split Window Algorithm

Land Surface Temperature (LST) estimation has been studied for several purposes, while the optimal method of estimating the LST has not been criticized yet. This research explores the optimum method in Land Surface Temperature (LST) estimation using LANDSAT-8 imagery data. Four different LST retrieval approaches, the Radiative Transfer Equation-based method (RTE), the Improved Mono-Window method (IMW), the Generalized Single-Channel method (GSC), and the Split-Window algorithm (SW), were calculated to present the LSTs over Buriram Town Municipality, Thailand. The calculated LSTs from these four methods were compared with the ground-based temperature data, taken on the same date and time of the employed LANDSAT-8 images. For this reason, the optimum method of the LST calculation was justified by considering the lowest normalized root means square error (NRMSE) values. As a result, the SW algorithm presents an optimum method in LST estimation. Regarding the SW, this algorithm requires not only the atmospheric profiles during satellite acquisition but also the retrieval of several coefficients. Besides, the LST retrieval method based on the SW algorithm is sensitive to water vapor content and coefficients. Although the SW algorithm is an optimum method explored in this study, it is emphasized that the adjustable values of coefficient response to the atmospheric state may be recommended. With these conditions, the SW algorithm can generate the land-surface temperature over the mixed land-use and land cover on the LANDSAT-8 images.

scholarly journals SPATIOLTEMPORAL MODELING THE IMPACT OF SURFACE CHARACTERISTICS VARIATIONS ON LAND SURFACE TEMPERATURE VARIATIONS: A CASE STUDY OF SAMALGHAN VALLY

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 401-405
Author(s):  
M. K. Firozjaei ◽  
M. Makki ◽  
J. Lentschke ◽  
M. Kiavarz ◽  
S. K. Alavipanah
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Incident Angle ◽  
Surface Characteristics ◽  
Slope Aspect ◽  
Biophysical Parameters ◽  
The Impact

Abstract. Spatiotemporal mapping and modeling of Land Surface Temperature (LST) variations and characterization of parameters affecting these variations are of great importance in various environmental studies. The aim of this study is a spatiotemporal modeling the impact of surface characteristics variations on LST variations for the studied area in Samalghan Valley. For this purpose, a set of satellite imagery and meteorological data measured at the synoptic station during 1988–2018, were used. First, single-channel algorithm, Tasseled Cap Transformation (TCT) and Biophysical Composition Index (BCI) were employed to estimate LST and surface biophysical parameters including brightness, greenness and wetness and BCI. Also, spatial modeling was used to modeling of terrain parameters including slope, aspect and local incident angle based on DEM. Finally, the principal component analysis (PCA) and the Partial Least Squares Regression (PLSR) were used to modeling and investigate the impact of surface characteristics variations on LST variations. The results indicated that surface characteristics vary significantly for case study in spatial and temporal dimensions. The correlation coefficient between the PC1 of LST and PC1s of brightness, greenness, wetness, BCI, DEM, and solar local incident angle were 0.65, −0.67, −0.56, 0.72, −0.43 and 0.53, respectively. Furthermore, the coefficient coefficient and RMSE between the observed LST variation and modelled LST variation based on PC1s of brightness, greenness, wetness, BCI, DEM, and local incident angle were 0.83 and 0.14, respectively. The results of study indicated the LST variation is a function of s terrain and surface biophysical parameters variations.

Sign in / Sign up

Export Citation Format

Share Document