scholarly journals GEOMATIC CONTRIBUTION FOR THE RESTORATION PROJECT OF THE VALENTINO CASTLE GREEN ROOM. FROM DATA ACQUISITION TO INTEGRATED DOCUMENTATION

2020 ◽  
Vol XLIII-B2-2020 ◽  
pp. 885-892
Author(s):  
G. Patrucco ◽  
F. Chiabrando ◽  
A. Dameri ◽  
L. Teppati Losè
Keyword(s):  
Building Information Modeling ◽  
Information Modeling ◽  
Heritage Conservation ◽  
Model Generation ◽  
Restoration Project ◽  
Starting Point ◽  
Building Information ◽  
Heritage Building ◽  
Close Range ◽  
Innovative Techniques

Abstract. In the framework of restoration operations, valuable assistance can be supplied from innovative techniques and methods developed in the field of Geomatics. Over the years, this continuous collaboration has produced synergistic and interdisciplinary results that have been successfully contributing to heritage conservation and valorisation. In the case of the current research, thorough multisensory investigations have been performed in order to provide a deeper knowledge of the Green Room of the Valentino Castle in Turin and to support the planning of the future restoration works that will involve this valuable asset. In the framework of this experience, four LiDAR systems have been employed in order to evaluate the different results obtainable from the sensors. Additionally, a complete photogrammetric close-range survey has been carried out, and some tests were completed using a hyperspectral camera. The workflow followed during the current research is described in this paper, and a comparison between the obtained outputs is proposed, focusing on the characteristics of these metric products, useful and sometimes necessary in the framework of the restoration project. Besides, some considerations on the advantages and the issues connected with the use of these reality-based data as a starting point for HBIM (Heritage Building Information Modeling) model generation are proposed, along with some observations about the potentialities of a photogrammetric co-registration approach using spectrum technologies for deterioration/decay detection and monitoring of heritage.

scholarly journals BIM for Existing Construction: A Different Logic Scheme and an Alternative Semantic to Enhance the Interoperabilty

2021 ◽  
Vol 11 (4) ◽  
pp. 1855
Author(s):  
Franco Guzzetti ◽  
Karen Lara Ngozi Anyabolu ◽  
Francesca Biolo ◽  
Lara D’Ambrosio
Keyword(s):  
Project Management ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Historical Buildings ◽  
Architectural Heritage ◽  
New Approach ◽  
Building Information ◽  
Heritage Building ◽  
New Construction

In the construction field, the Building Information Modeling (BIM) methodology is becoming increasingly predominant and the standardization of its use is now an essential operation. This method has become widespread in recent years, thanks to the advantages provided in the framework of project management and interoperability. Hoping for its complete dissemination, it is unthinkable to use it only for new construction interventions. Many are experiencing what happens with the so-called Heritage Building Information Modeling (HBIM); that is, how BIM interfaces with Architectural Heritage or simply with historical buildings. This article aims to deal with the principles and working methodologies behind BIM/HBIM and modeling. The aim is to outline the themes on which to base a new approach to the instrument. In this way, it can be adapted to the needs and characteristics of each type of building. Going into the detail of standards, the text also contains a first study regarding the classification of moldable elements. This proposal is based on current regulations and it can provide flexible, expandable, and unambiguous language. Therefore, the content of the article focuses on a revision of the thinking underlying the process, also providing a more practical track on communication and interoperability.

scholarly journals INTEGRATING TOPOGRAPHIC, PHOTOGRAMMETRIC AND LASER SCANNING TECHNIQUES FOR A SCAN-TO-BIM PROCESS

2021 ◽  
Vol XLIII-B2-2021 ◽  
pp. 883-890
Author(s):  
M. Lo Brutto ◽  
E. Iuculano ◽  
P. Lo Giudice
Keyword(s):  
Laser Scanning ◽  
Building Information Modeling ◽  
Laser Scanner ◽  
Point Clouds ◽  
Parametric Modeling ◽  
Information Modeling ◽  
Survey Method ◽  
The Real ◽  
Building Information ◽  
Heritage Building

Abstract. The preservation of historic buildings can often be particularly difficult due to the lack of detailed information about architectural features, construction details, etc.. However, in recent years considerable technological innovation in the field of Architecture, Engineering, and Construction (AEC) has been achieved by the Building Information Modeling (BIM) process. BIM was developed as a methodology used mainly for new construction but, given its considerable potential, this approach can also be successfully used for existing buildings, especially for buildings of historical and architectural value. In this case, it is more properly referred to as Historic – or Heritage – Building Information Modeling (HBIM). In the HBIM process, it is essential to precede the parametric modeling phase of the building with a detailed 3D survey that allows the acquisition of all geometric information. This methodology, called Scan-to-BIM, involves the use of 3D survey techniques for the production of point clouds as a geometric “database” for parametric modeling. The Scan-to-BIM approach can have several issues relating to the complexity of the survey. The work aims to apply the Scan-to-BIM approach to the survey and modeling of a historical and architectural valuable building to test a survey method, based on integrating different techniques (topography, photogrammetry and laser scanning), that improves the data acquisition phase. The “Real Cantina Borbonica” (Cellar of Royal House of Bourbon) in Partinico (Sicily, Italy) was chosen as a case study. The work has allowed achieving the HBIM of the “Real Cantina Borbonica” and testing an approach based exclusively on a topographic constraint to merge in the same reference system all the survey data (laser scanner and photogrammetric point clouds).

Virtual Reality (VR), Augmented Reality (AR), and Historic Building Information Modeling (HBIM) for Built Heritage Enhancement

2020 ◽  
pp. 111-136
Author(s):  
Fabrizio Banfi ◽  
Daniela Oreni
Keyword(s):  
Augmented Reality ◽  
Building Information Modeling ◽  
Three Dimensional ◽  
Information Modeling ◽  
New Paradigm ◽  
Built Heritage ◽  
Three Dimensional Modeling ◽  
Generative Modeling ◽  
Building Information ◽  
Heritage Building

The latest developments in the field of generative modeling and building information modeling for heritage building (HBIM) have allowed the authors to increase the level of transmissibility of information through the most modern techniques of virtual and augmented reality (VR-AR). This chapter summarises the last years of applied research in the field of three-dimensional modeling oriented to digitise and correctly represent the built heritage thanks to the integration of the most modern three-dimensional survey techniques with a scan-to-BIM process based on new grades of generation (GOG) and accuracy (GOA). The new paradigm of the complexity of the built heritage, its tangible and intangible values, have been shared through new immersive ways able to increase the information contents and the knowledge accumulated in the last years of one of the most representative and unique buildings of the Lombard architecture: the Cà Granda in Milan.

scholarly journals Using 3D Spatial Visualisation to Interpret the Coverage of Anti-Aircraft Batteries on a World War II Battlefield

Heritage ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 2457-2479 ◽  
Author(s):  
Spennemann ◽  
Poynter
Keyword(s):  
World War Ii ◽  
Cultural Landscape ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Aleutian Islands ◽  
Technological Capabilities ◽  
World War ◽  
Building Information ◽  
Aerial Warfare ◽  
Heritage Building

Heritage Building Information Modeling (HBIM) focuses on the documentation and visualization of heritage properties which are confined in their permanent terrestrial space. This paper extended the concept of Heritage Building Information Modeling to the airspace above the sites. It presented a methodology for the 3D spatial visualisation of the aerial space controlled by anti-aircraft (AA) guns, taking into account the masking effects of the underlying terrain and the technological capabilities of the guns (rate of fire, projectile weight, etc.). The tool permits a nuanced analysis of the interplay between attacking aircraft and the siting of anti-aircraft guns and thus, allows for the analysis of the cultural landscape of World War II-era battle fields, which has to take into account the influence of aerial warfare. The applicability was illustrated by the case example of the Japanese WWII base on Kiska (Aleutian Islands).

scholarly journals A Review of Heritage Building Information Modeling (H-BIM)

2018 ◽  
Vol 2 (2) ◽  
pp. 21 ◽  
Author(s):  
Facundo López ◽  
Pedro Lerones ◽  
José Llamas ◽  
Jaime Gómez-García-Bermejo ◽  
Eduardo Zalama
Keyword(s):  
Building Information Modeling ◽  
Information Modeling ◽  
Building Information ◽  
Heritage Building

scholarly journals The innovation of accounting and certification of historic architectural monuments using BIM technology

2020 ◽  
Vol 19 (2) ◽  
pp. 005-018
Author(s):  
Olga Kysil ◽  
Raddamila Kosarevska ◽  
Oleksii Levchenko
Keyword(s):  
Building Information Modeling ◽  
Modern Technology ◽  
Information Modeling ◽  
Heritage Conservation ◽  
Architectural Heritage ◽  
Software Applications ◽  
Promising Tool ◽  
Building Information ◽  
Historical Objects ◽  
Automatic Formation

Presented research shows Building Information Modeling (BIM) technology as a highly promising tool for architectural heritage conservation. Analyses of contemporary publications by BIM topic and HBIM (Historic Building Information Modeling), its specific division, are conducted. The usage of modern technology analysis for digitizing monuments along with the outdated ‘manual’ of accounting and passportization methods are executed, and a lack of automation of the above processes is observed. Additionally, the research reveals that during the operational period of historical objects, there was no method of fixing their architectural transformations. The necessity of automation of the abovementioned processes by the capabilities of the BIM technology is emphasized. Automation methods developed utilizing the BIM model properties as a relational database, are described. An example of the method implementation in architectural and construction software applications is given. The case uses the rules of filling in the state accounting card of Ukraine. Nonetheless, the automatic formation of a document like this by the standards of any country is underscored.

scholarly journals Use of Innovative Tools and Techniques for Heritage Preservation in the Digital Era: Academic Research on Asaf Khan’s Tomb in Lahore

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Quratulain Asghar ◽  
Adnan Jalil ◽  
Madiha Zaman
Keyword(s):  
Building Information Modeling ◽  
Parametric Modeling ◽  
Information Modeling ◽  
Heritage Conservation ◽  
Digital Tools ◽  
Architectural Heritage ◽  
Heritage Preservation ◽  
Digital Era ◽  
Building Information ◽  
Tools And Techniques

In today’s digital era, as resources diminish and globalization provokes more regimented situations, innovative technologies such as parametric modeling, Building Information Modelling, 3D printing, and 3D scanners present dynamic answers for conserving and preserving traditional buildings. The main aim of this research is to explore digital technologies and tools to indicate how they can be of assistance in heritage preservation. Moreover, it also aims to identify the techniques that can make this laborious process more efficient and precise. All around the world, heritage sites are brought to life with the help of augmented models. This research highlights the digital methodology, tools, and techniques not fully explored due to limited funding and opportunities but present here as the evolving concept in the field of heritage conservation. It is more about the examination and investigation of the preservation process with the help of digital technology. It also explores the extent of possibilities and opportunities these digital tools can provide. Digital techniques and tools are extensively used within the traditional heritage internationally. However, Pakistan is still lagging behind in this domain. This study reconnoiters the impending uses of digital techniques in preserving architectural heritage and highlights how simple usage of these instruments can make the whole process more efficient and convenient. The outcomes specify that these tools provide many advantages over the traditional methods of conservation and have proved to be more useful and accurate. The application of photogrammetry to create models of old structures is also discussed. Moreover, the creative use of these tools to develop cordiality to original structures without replacing or damaging them is explored. This paper examines the application of these cutting-edge technologies for the preservation of architectural heritage in Pakistan with specific reference to a Mughal era structure in Lahore, that is, Asaf Khan’s Tomb. Despite the rich architectural heritage of Lahore, there is no proper conservation methodology currently practiced to preserve it. The above mentioned structure was surveyed, documented and the then-current situation was modeled using different softwares including Building Information Modeling in Revit. For the climatic and solar analysis of the structure, Ladybug which is a Rhino plug-in was explored and Microsoft Form it was used for the detailed solar energy analysis.          Keywords: building information modeling, digital tools and technology, heritage conservation, photogrammetry

Applicability of BIM in Heritage Buildings

2019 ◽  
Vol 8 (2) ◽  
pp. 20-37 ◽  
Author(s):  
Abobakr Al-Sakkaf ◽  
Reem Ahmed
Keyword(s):  
Case Studies ◽  
Building Information Modeling ◽  
Decision Makers ◽  
Information Modeling ◽  
Building Modeling ◽  
Maintenance And Rehabilitation ◽  
Building Information ◽  
Heritage Buildings ◽  
Heritage Building ◽  
Operational Processes

Over the past four decades, building modeling has taken numerous forms utilizing available technologies and software. Building information modeling (BIM) has significantly developed with the continuous advancements in the information technology and hardware industries. The evolution of BIM has attracted many researchers to explore its possible applications in modeling buildings and facilities with a humanitarian heritage value. However, researches have not been limited to that, as they later expanded to test the applicability of BIM in progressing the fields of maintenance and rehabilitation, operation and management, and even checking the durability of such buildings against varying circumstances and usability as well. As a result of a deep literature review, this research is developed to provide a critique of the previous studies conducted on the fields of heritage building information modeling (HBIM), the relevant software and equipment used in those studies, as well as case studies and applications used to demonstrate HBIM capabilities. Also, two case studies of Qasr Al Farid and Al-Bugiry buildings in KSA were implemented in this research to demonstrate the capabilities of HBIM in preserving the heritage value of historic buildings and monuments and to provide possible means of archiving the heritage value of those buildings utilizing state-of-the-art technologies. This study is expected to aid governments and decision makers of heritage buildings in understanding the positive impacts of including the HBIM in their management and operational processes, and will also act as a beneficial guiding tool for academic researchers to identify the gaps and limitations in previous studies to work towards overcoming them.

scholarly journals Heritage Building Information Modeling (H-BIM) Applied to A Stone Bridge

2019 ◽  
Vol 8 (3) ◽  
pp. 121 ◽  
Author(s):  
Carlos León-Robles ◽  
Juan Reinoso-Gordo ◽  
Juan González-Quiñones
Keyword(s):  
Building Information Modeling ◽  
Civil Engineering ◽  
Information Modeling ◽  
Building Information ◽  
Government Planning ◽  
Heritage Building

Certain historical works of civil engineering should be preserved as heritage monuments and when possible should continue serving the function they were designed for. Old stone bridges could be sustainably maintained but their conservation requires accurate documentation. In this study, we have scanned Ízbor bridge (1860) in Spain, and to facilitate conservation, we have modeled the ancient bridge using BIM (building information modeling). We propose a method and a model for this kind of bridge to be used as a reference for similar heritage monuments. Ízbor bridge modeled in this way will be useful for government planning and conservation agencies.

Sign in / Sign up

Export Citation Format

Share Document