scholarly journals Identifying links between origami and compliant mechanisms

2011 ◽  
Vol 2 (2) ◽  
pp. 217-225 ◽  
Author(s):  
H. C. Greenberg ◽  
M. L. Gong ◽  
S. P. Magleby ◽  
L. L. Howell
Keyword(s):  
Graph Theory ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mechanism Analysis ◽  
Initial State ◽  
Graph Models ◽  
Analysis And Design ◽  
Body Model ◽  
Folding Paper ◽  
Rigid Body Model

Abstract. Origami is the art of folding paper. In the context of engineering, orimimetics is the application of folding to solve problems. Kinetic origami behavior can be modeled with the pseudo-rigid-body model since the origami are compliant mechanisms. These compliant mechanisms, when having a flat initial state and motion emerging out of the fabrication plane, are classified as lamina emergent mechanisms (LEMs). To demonstrate the feasibility of identifying links between origami and compliant mechanism analysis and design methods, four flat folding paper mechanisms are presented with their corresponding kinematic and graph models. Principles from graph theory are used to abstract the mechanisms to show them as coupled, or inter-connected, mechanisms. It is anticipated that this work lays a foundation for exploring methods for LEM synthesis based on the analogy between flat-folding origami models and linkage assembly.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

A Generalized Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Energy Storage ◽  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mechanism Analysis ◽  
Model Concept ◽  
Loop Closure ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant mechanisms gain at least some of their motion from flexible members. The combination of large-deflection beam analysis, kinematic motion analysis, and energy storage makes the analysis of compliant mechanisms difficult. The design of mechanisms often requires iteration between synthesis and analysis procedures. In general, the difficulty in analysis has limited the use of compliant mechanisms to applications where only simple functions and motions are required. The pseudo-rigid-body model concept promises to be the key to unifying the compliant and rigid-body mechanism theories. It simplifies compliant mechanism analysis by determining an equivalent rigid-body mechanism that accurately models the kinematic characteristics of a compliant mechanism. Once this model is obtained, many well known concepts from rigid-body mechanism theory become amenable for use to analyze and design compliant mechanisms. The pseudo-rigid-body-model concept is used to develop a generalized loop-closure method for the analysis and synthesis of compliant mechanisms. Synthesis is divided into two major categories: (i) rigid-body replacement synthesis, wherein only kinematic constraints are considered, and (ii) synthesis for compliance, wherein considerations of the energy storage and input/output force/torque characteristics of compliant mechanisms are utilized. The method allows compliant mechanisms to be designed for tasks that would have earlier been assumed to be unlikely, if not impossible, applications of compliant mechanisms. Examples of function, motion, and path generation of compliant mechanisms are presented for the first time.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1996 ◽  
Vol 118 (1) ◽  
pp. 126-131 ◽  
Author(s):  
L. L. Howell ◽  
A. Midha ◽  
T. W. Norton
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

A Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms

1996 ◽  
Vol 118 (1) ◽  
pp. 121-125 ◽  
Author(s):  
L. L. Howell ◽  
A. Midha
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mechanism Analysis ◽  
Model Concept ◽  
Loop Closure ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis ◽  
Kinematic Motion Analysis

Compliant mechanisms gain at least some of their motion from flexible members. The combination of large-deflection beam analysis, kinematic motion analysis, and energy storage makes the analysis of compliant mechanisms difficult. The design of mechanisms often requires iteration between synthesis and analysis procedures. In general, the difficulty in analysis has limited the use of compliant mechanisms to applications where only simple functions and motions are required. The pseudo-rigid-body model concept promises to be the key to unifying the compliant and rigid-body mechanism theories. It simplifies compliant mechanism analysis by determining an equivalent rigid-body mechanism that accurately models the kinematic characteristics of a compliant mechanism. Once this model is obtained, many well known concepts from rigid-body mechanism theory become amenable for use to analyze and design compliant mechanisms. The pseudo-rigid-body-model concept is used to develop a loop-closure method for the analysis and synthesis of compliant mechanisms. The method allows compliant mechanisms to be designed for tasks that would have earlier been assumed to be unlikely, if not impossible, applications of compliant mechanisms.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

A Simple and Accurate Method for Determining Large Deflections in Complaint Mechanisms Subjected to End Forces and Moments

1998 ◽  
Author(s):  
A. Saxena ◽  
Steven N. Kramer
Keyword(s):  
Rigid Body ◽  
Numerical Integration ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Beam Equation ◽  
Integration Scheme ◽  
Large Deflections ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads for which, traditional methods of deflection analysis do not apply Nonlinearities introduced by these large deflections make the system comprising such members difficult to solve Parametric deflection approximations are then deemed helpful in the analysis and synthesis of compliant mechanisms This is accomplished by seeking the pseudo-rigid-body model representation of the compliant mechanism A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads with positive end moments A numerical integration technique using quadrature formulae has been employed to solve the nonlinear Bernoulli-Euler beam equation for the tip deflection Implementation of this scheme is relatively simpler than the elliptic integral formulation and provides nearly accurate results Results of the numerical integration scheme are compared with the beam finite element analysis An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Parametric Deflection Approximations for Initially Curved, Large-Deflection Beams in Compliant Mechanisms

1996 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Curved Beam ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Fundamental Type ◽  
Applied Forces ◽  
Flexible Member

Abstract The analysis of systems containing highly flexible members is made difficult by the nonlineararities caused by large deflections of the flexible members. The analysis and design of many such systems may be simplified by using pseudo-rigid-body approximations in modeling the flexible members. The pseudo-rigid-body model represents flexible members as rigid links, joined at pin joints with torsional springs. Appropriate values for link lengths and torsional spring stiffnesses are determined such that the deflection path and force-deflection relationships are modeled accurately. Pseudo-rigid-body approximations have been developed for initially straight beams with externally applied forces at the beam end. This work develops approximations for another fundamental type of flexible member, the initially curved beam with applied force at the beam end. This type of flexible member is commonly used in compliant mechanisms. An example of the use of the resulting pseudo-rigid-body approximations in compliant mechanisms is included.

Compliant Pantographs via the Pseudo-Rigid-Body Model

1998 ◽  
Author(s):  
Andrew J. Nielson ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Test Results ◽  
Rigid Link ◽  
Body Model ◽  
Design Flexibility ◽  
Model Predictions ◽  
Rigid Body Model ◽  
Classical Mechanism

Abstract This paper uses a familiar classical mechanism, the pantograph, to demonstrate the utility of the pseudo-rigid-body model in the design of compliant mechanisms to replace rigid-link mechanisms, and to illustrate the advantages and limitations of the resulting compliant mechanisms. To demonstrate the increase in design flexibility, three different compliant mechanism configurations were developed for a single corresponding rigid-link mechanism. The rigid-link pantograph consisted of six links and seven joints, while the corresponding compliant mechanisms had no more than two links and three joints (a reduction of at least four links and four joints). A fourth compliant pantograph, corresponding to a rhomboid pantograph, was also designed and tested. The test results showed that the pseudo-rigid-body model predictions were accurate over a large range, and the mechanisms had displacement characteristics of rigid-link mechanisms in that range. The limitations of the compliant mechanisms included reduced range compared to their rigid-link counterparts. Also, the force-deflection characteristics were predicted by the pseudo-rigid-body model, but they did not resemble those for a rigid-link pantograph because of the energy storage in the flexible segments.

Classification of Compliant Mechanisms and Determination of the Degrees of Freedom Using the Concepts of Compliance Number and Pseudo-Rigid-Body Model

2019 ◽  
Author(s):  
Pratheek Bagivalu Prasanna ◽  
Ashok Midha ◽  
Sushrut G. Bapat
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Body Model ◽  
Active Compliance ◽  
Kinematic Behavior ◽  
Rigid Body Model

Abstract Understanding the kinematic properties of a compliant mechanism has always proved to be a challenge. A concept of compliance number offered earlier emphasized the development of terminology that aided in its determination. A method to evaluate the elastic degrees of freedom associated with the flexible segments/links of a compliant mechanism using the pseudo-rigid-body model (PRBM) concept is provided. In this process, two distinct classes of compliant mechanisms are developed involving: (i) Active Compliance and (ii) Passive Compliance. Furthermore, these also aid in a better characterization of the kinematic behavior of a compliant mechanism. A more lucid interpretation of the significance of compliance number is provided. Applications of this method to both active and passive compliant mechanisms are exemplified. Finally, an experimental procedure that aids in visualizing the degrees of freedom as calculated is presented.

On a Generalized Approach for Design of Compliant Mechanisms Using the Pseudo-Rigid-Body Model Concept

2014 ◽  
Author(s):  
Sushrut G. Bapat ◽  
Ashok Midha ◽  
Ashish B. Koli
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Motion Generation ◽  
Model Concept ◽  
Finite Element Software ◽  
Body Model ◽  
Wide Range ◽  
Rigid Body Model ◽  
Torque Values

This paper provides a generalized approach for the design of compliant mechanisms. The paper discusses the implicit uncoupling, between the kinematic and energy/torque equations, enabled by the pseudo-rigid-body model concept, and utilizes it for designing a variety of compliant mechanism types for a wide-range of user specifications. Pseudo-rigid-body four-bar mechanisms, with one to four torsional springs located at the revolute joints, are considered to demonstrate the design methodology. Mechanisms are designed for conventional tasks, such as function, path and motion generation, and path generation with prescribed timing, with energy/torque specified at the precision-positions. State-of-the-art rigid-body synthesis techniques are applied to the pseudo-rigid-body model to satisfy the kinematic requirements. Energy/torque equations are then used to account for the necessary compliance according to the user specifications. The approach utilizes a conventional, simple yet efficient optimization formulation to solve energy/torque equations that allow a designer to i) achieve realistic solutions, ii) specify appropriate energy/torque values, and iii) reduce the sensitivities associated with the ‘synthesis with compliance’ approach. A variety of examples are presented to demonstrate the applicability and effectiveness of the approach. All of the examples are verified with the finite element software ANSYS®.

Sign in / Sign up

Export Citation Format

Share Document