scholarly journals Distributed acoustic sensing as a tool for exploration and monitoring: a proof-of-concept

2021 ◽  
Author(s):  
Nicola Piana Agostinetti ◽  
Alberto Villa ◽  
Gilberto Saccorotti
Keyword(s):  
High Resolution ◽  
Plane Wave ◽  
Geothermal Field ◽  
P Wave ◽  
Apparent Velocity ◽  
Near Surface ◽  
Acoustic Sensing ◽  
Geothermal Activity ◽  
Distributed Acoustic Sensing ◽  
Microseismic Event

Abstract. We use PoroTOMO experimental data to compare the performance of Distributed Acoustic Sensing (DAS) and geophone data in executing standard exploration and monitoring activities. The PoroTOMO experiment consists of two "seismic systems": (a) a 8.6 km long optical fibre cable deployed across the Brady geothermal field and covering an area of 1.5 x 0.5 km with 100 m long segments, and (b) an array of 238 co-located geophones with an average spacing of 60 m. The PoroTOMO experiment recorded continuous seismic data between March 10th and March 25th 2016. During such period, a ML 4.3 regional event occurred in the southwest, about 150 km away from the geothermal field, together with several microseismic local events related to the geothermal activity. The seismic waves generated from such seismic events have been used as input data in this study. For the exploration tasks, we compare the propagation of the ML 4.3 event across the geothermal field in both seismic systems in term of relative time-delay, for a number of configurations and segments. Defined the propagation, we analyse and compare the amplitude and the signal-to-noise ratio (SNR) of the P-wave in the two systems at high resolution. For testing the potential in monitoring local seismicity, we first perform an analysis of the geophone data for locating a microseismic event, based on expert opinion. Then, we a adopt different workflow for the automatic location of the same microseismic event using DAS data. For testing the potential in monitoring distant event, data from the regional earthquake are used for retrieving both the propagation direction and apparent velocity of the wavefield, using a standard plane-wave-fitting approach. Our results indicate that: (1) at a local scale, the seismic P-waves propagation and their characteristics (i.e. SNR and amplitude) along a single cable segment are robustly consistent with recordings from co-located geophones (delay-times δt ∼ 0.3 over 400 m for both seismic systems) ; (2) the interpretation of seismic wave propagation across multiple separated segments is less clear, due to the heavy contamination of scattering sources and local velocity heterogeneities; nonetheless, results from the plane-wave fitting still indicate the possibility for a consistent detection and location of the event; (3) at high-resolution (10 m), large amplitude variations along the fibre cable seem to robustly correlate with near surface geology; (4) automatic monitoring of microseismicity can be performed with DAS recordings with results comparable to manual analysis of geophone recordings (i.e. maximum horizontal error on event location around 70 m for both geophones and DAS data) ; and (5) DAS data pre-conditioning (e.g., temporal sub-sampling and channel-stacking) and dedicated processing techniques are strictly necessary for making any real-time monitoring procedure feasible and trustable.

Distributed Acoustic Sensing Using a Large-Volume Airgun Source and Internet Fiber in an Urban Area

2021 ◽  
Author(s):  
Zhenghong Song ◽  
Xiangfang Zeng ◽  
Baoshan Wang ◽  
Jun Yang ◽  
Xiaobin Li ◽  
...  
Keyword(s):  
Urban Area ◽  
Urban Areas ◽  
Signal To Noise Ratio ◽  
Gauge Length ◽  
P Wave ◽  
S Wave ◽  
Near Surface ◽  
Acoustic Sensing ◽  
Wave Signal ◽  
Distributed Acoustic Sensing

Abstract Seismological methods have been widely used to construct subsurface images in urban areas, for both seismological and engineering purposes. However, it remains a challenge to continuously operate a dense array in cities for high-resolution 4D imaging. In this study, we utilized distributed acoustic sensing (DAS) and a 5.2 km long, L-shaped, telecom, fiber-optic cable to record the wavefield from a highly repeatable airgun source located 7–10 km away. No P-wave signal was observed, but the S-wave signal emerged clearly on the shot-stacked traces, and the arrivals were consistent with collocated geophone traces. Because the signal quality is significantly affected by cable coupling and local noise, three methods can be employed to improve signal-to-noise ratio: (1) stacking contiguous, colinear channels to increase effective gauge length, (2) connecting multiple fibers within a single conduit and stacking collocated channels, and (3) using engineered fiber. In conclusion, the combination of DAS, using internet fiber and an airgun source with proven efficient signal enhancement methods, can provide frequent snapshots of the near surface across an urban area.

Distributed Acoustic Sensing Using Dark Fiber for Array Detection of Regional Earthquakes

2021 ◽  
Author(s):  
Avinash Nayak ◽  
Jonathan Ajo-Franklin ◽  
Keyword(s):  
Urban Areas ◽  
Geothermal Field ◽  
Seismic Events ◽  
Broadband Seismometer ◽  
Acoustic Sensing ◽  
Array Detection ◽  
Distributed Acoustic Sensing ◽  
Back Azimuth ◽  
Ubiquitous Presence

Abstract The intrinsic array nature of distributed acoustic sensing (DAS) makes it suitable for applying beamforming techniques commonly used in traditional seismometer arrays for enhancing weak and coherent seismic phases from distant seismic events. We test the capacity of a dark-fiber DAS array in the Sacramento basin, northern California, to detect small earthquakes at The Geysers geothermal field, at a distance of ∼100  km from the DAS array, using beamforming. We use a slowness range appropriate for ∼0.5–1.0  Hz surface waves that are well recorded by the DAS array. To take advantage of the large aperture, we divide the ∼20  km DAS cable into eight subarrays of aperture ∼1.5–2.0  km each, and apply beamforming independently to each subarray using phase-weighted stacking. The presence of subarrays of different orientations provides some sensitivity to back azimuth. We apply a short-term average/long-term average detector to the beam at each subarray. Simultaneous detections over multiple subarrays, evaluated using a voting scheme, are inferred to be caused by the same earthquake, whereas false detections caused by anthropogenic noise are expected to be localized to one or two subarrays. Analyzing 45 days of continuous DAS data, we were able to detect all earthquakes with M≥2.4, while missing most of the smaller magnitude earthquakes, with no false detections due to seismic noise. In comparison, a single broadband seismometer co-located with the DAS array was unable to detect any earthquake of M<2.4, many of which were detected successfully by the DAS array. The seismometer also experienced a large number of false detections caused by spatially localized noise. We demonstrate that DAS has significant potential for local and regional detection of small seismic events using beamforming. The ubiquitous presence of dark fiber provides opportunities to extend remote earthquake monitoring to sparsely instrumented and urban areas.

scholarly journals Noise-based ballistic wave passive seismic monitoring. Part 1: body waves

2020 ◽  
Vol 221 (1) ◽  
pp. 683-691 ◽  
Author(s):  
F Brenguier ◽  
R Courbis ◽  
A Mordret ◽  
X Campman ◽  
P Boué ◽  
...  
Keyword(s):  
Seismic Velocity ◽  
Noise Source ◽  
Seismic Monitoring ◽  
Body Waves ◽  
P Wave ◽  
New Technique ◽  
Apparent Velocity ◽  
Near Surface ◽  
Velocity Increase ◽  
Passive Seismic

SUMMARY Unveiling the mechanisms of earthquake and volcanic eruption preparation requires improving our ability to monitor the rock mass response to transient stress perturbations at depth. The standard passive monitoring seismic interferometry technique based on coda waves is robust but recovering accurate and properly localized P- and S-wave velocity temporal anomalies at depth is intrinsically limited by the complexity of scattered, diffracted waves. In order to mitigate this limitation, we propose a complementary, novel, passive seismic monitoring approach based on detecting weak temporal changes of velocities of ballistic waves recovered from seismic noise correlations. This new technique requires dense arrays of seismic sensors in order to circumvent the bias linked to the intrinsic high sensitivity of ballistic waves recovered from noise correlations to changes in the noise source properties. In this work we use a dense network of 417 seismometers in the Groningen area of the Netherlands, one of Europe's largest gas fields. Over the course of 1 month our results show a 1.5 per cent apparent velocity increase of the P wave refracted at the basement of the 700-m-thick sedimentary cover. We interpret this unexpected high value of velocity increase for the refracted wave as being induced by a loading effect associated with rainfall activity and possibly canal drainage at surface. We also observe a 0.25 per cent velocity decrease for the direct P-wave travelling in the near-surface sediments and conclude that it might be partially biased by changes in time in the noise source properties even though it appears to be consistent with complementary results based on ballistic surface waves presented in a companion paper and interpreted as a pore pressure diffusion effect following a strong rainfall episode. The perspective of applying this new technique to detect continuous localized variations of seismic velocity perturbations at a few kilometres depth paves the way for improved in situ earthquake, volcano and producing reservoir monitoring.

Introduction to this special section: Distributed acoustic sensing

2020 ◽  
Vol 39 (11) ◽  
pp. 775-775
Author(s):  
Tieyuan Zhu ◽  
Ariel Lellouch ◽  
Kyle T. Spikes
Keyword(s):  
Event Detection ◽  
Special Section ◽  
Unique Problem ◽  
Fracture Characterization ◽  
Acoustic Sensing ◽  
Distributed Acoustic Sensing ◽  
Work Done ◽  
Microseismic Event

Distributed acoustic sensing (DAS) has seen many advances in recent years with many different applications. This special section contains six papers featuring applications that vary from microseismic event detection to subsea applications to surface deployments, fracture characterization, and well irregularity identification. Each paper introduces a unique problem and then poses the use of DAS in an appropriate way to solve the problem. Special sections on DAS are relatively frequent in the literature currently, so these papers are a snapshot of the work done with the technology. We hope you enjoy these publications.

Sign in / Sign up

Export Citation Format

Share Document