USING GUIDED P-WAVES TO OBTAIN A HIGH RESOLUTION P-WAVE VELOCITY MODEL OF THE NEAR SURFACE

2016 ◽  
Author(s):  
Karl Campbell
Keyword(s):  
High Resolution ◽  
Wave Velocity ◽  
Velocity Model ◽  
P Wave ◽  
P Waves ◽  
Near Surface ◽  
P Wave Velocity

Passive seismic imaging using microearthquakes

Geophysics ◽  
1995 ◽  
Vol 60 (4) ◽  
pp. 1178-1186 ◽  
Author(s):  
M. Reza Daneshvar ◽  
Clarence S. Clay ◽  
Martha K. Savage
Keyword(s):  
Wave Velocity ◽  
Signal To Noise Ratio ◽  
Velocity Model ◽  
P Wave ◽  
Seismic Signals ◽  
Subsurface Structure ◽  
Near Surface ◽  
P Wave Velocity ◽  
Recording Station ◽  
Passive Seismic

We have developed a method of processing seismic signals generated by microearthquakes to image local subsurface structure beneath a recording station. This technique uses the autocorrelation of the vertically traveling earthquake signals to generate pseudoreflection seismograms that can be interpreted for subsurface structure. Processed pseudoreflection data, from microearthquakes recorded in the island of Hawaii, show consistent reflectivity patterns that are interpreted as near‐surface horizontal features. Forward modeling of the pseudoreflection data results in a P‐wave velocity model that shows reasonable agreement with the velocity model derived from a refraction study in the region. Usable signal‐to‐noise ratio is obtained down to 2 s. A shear‐wave velocity model was also generated by applying this technique to horizontal component data.

scholarly journals A P-wave velocity model of the upper crust of the Sannio region (Southern Apennines, Italy)

1998 ◽  
Vol 41 (4) ◽  
Author(s):  
G. Iannaccone ◽  
L. Improta ◽  
P. Capuano ◽  
A. Zollo ◽  
G. Biella ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Seismic Velocity ◽  
Carbonate Platform ◽  
Velocity Model ◽  
P Wave ◽  
Seismic Velocities ◽  
Upper Crust ◽  
Near Surface ◽  
P Wave Velocity ◽  
Apulia Platform

This paper describes the results of a seismic refraction profile conducted in October 1992 in the Sannio region, Southern Italy, to obtain a detailed P-wave velocity model of the upper crust. The profile, 75 km long, extended parallel to the Apenninic chain in a region frequently damaged in historical time by strong earthquakes. Six shots were fired at five sites and recorded by a number of seismic stations ranging from 41 to 71 with a spacing of 1-2 km along the recording line. We used a two-dimensional raytracing technique to model travel times and amplitudes of first and second arrivals. The obtained P-wave velocity model has a shallow structure with strong lateral variations in the southern portion of the profile. Near surface sediments of the Tertiary age are characterized by seismic velocities in the 3.0-4.1 km/s range. In the northern part of the profile these deposits overlie a layer with a velocity of 4.8 km/s that has been interpreted as a Mesozoic sedimentary succession. A high velocity body, corresponding to the limestones of the Western Carbonate Platform with a velocity of 6 km/s, characterizes the southernmost part of the profile at shallow depths. At a depth of about 4 km the model becomes laterally homogeneous showing a continuous layer with a thickness in the 3-4 km range and a velocity of 6 km/s corresponding to the Meso-Cenozoic limestone succession of the Apulia Carbonate Platform. This platform appears to be layered, as indicated by an increase in seismic velocity from 6 to 6.7 km/s at depths in the 6-8 km range, that has been interpreted as a lithological transition from limestones to Triassic dolomites and anhydrites of the Burano formation. A lower P-wave velocity of about 5.0-5.5 km/s is hypothesized at the bottom of the Apulia Platform at depths ranging from 10 km down to 12.5 km; these low velocities could be related to Permo-Triassic siliciclastic deposits of the Verrucano sequence drilled at the bottom of the Apulia Platform in the Apulia Foreland.

Seismological studies in a rock body at Chalk River, Ontario and their relation to fractures

1982 ◽  
Vol 19 (8) ◽  
pp. 1535-1547 ◽  
Author(s):  
C. Wright
Keyword(s):  
Wave Velocity ◽  
Test Site ◽  
P Wave ◽  
Seismic Velocities ◽  
S Wave ◽  
P Waves ◽  
Rock Body ◽  
Near Surface ◽  
Wave Velocities ◽  
P Wave Velocity

Seismological experiments have been undertaken at a test site near Chalk River, Ontario that consists of crystalline rocks covered by glacial sediments. Near-surface P and S wave velocity and amplitude variations have been measured along profiles less than 2 km in length. The P and S wave velocities were generally in the range 4.5–5.6 and 2.9–3.2 km/s, respectively. These results are consistent with propagation through fractured gneiss and monzonite, which form the bulk of the rock body. The P wave velocity falls below 5.0 km/s in a region where there is a major fault and in an area of high electrical conductivity; such velocity minima are therefore associated with fracture systems. For some paths, the P and 5 wave velocities were in the ranges 6.2–6.6 and 3.7–4.1 km/s, respectively, showing the presence of thin sheets of gabbro. Temporal changes in P travel times of up to 1.4% over a 12 h period were observed where the sediment cover was thickest. The cause may be changes in the water table. The absence of polarized SH arrivals from specially designed shear wave sources indicates the inhomogeneity of the test site. A Q value of 243 ± 53 for P waves was derived over one relatively homogeneous profile of about 600 m length. P wave velocity minima measured between depths of 25 and 250 m in a borehole correlate well with the distribution of fractures inferred from optical examination of borehole cores, laboratory measurements of seismic velocities, and tube wave studies.

VSP traveltime inversion: Near‐surface issues

Geophysics ◽  
2004 ◽  
Vol 69 (2) ◽  
pp. 345-351 ◽  
Author(s):  
Geoff J.M. Moret ◽  
William P. Clement ◽  
Michael D. Knoll ◽  
Warren Barrash
Keyword(s):  
Wave Velocity ◽  
Regularization Parameter ◽  
Velocity Model ◽  
P Wave ◽  
Seismic Profiles ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Shallow Subsurface ◽  
P Wave Velocity ◽  
Velocity Information

P‐wave velocity information obtained from vertical seismic profiles (VSPs) can be useful in imaging subsurface structure, either by directly detecting changes in the subsurface or as an aid to the interpretation of seismic reflection data. In the shallow subsurface, P‐wave velocity can change by nearly an order of magnitude over a short distance, so curved rays are needed to accurately model VSP traveltimes. We used a curved‐ray inversion to estimate the velocity profile and the discrepancy principle to estimate the data noise level and to choose the optimum regularization parameter. The curved‐ray routine performed better than a straight‐ray inversion for synthetic models containing high‐velocity contrasts. The application of the inversion to field data produced a velocity model that agreed well with prior information. These results show that curved‐ray inversion should be used to obtain velocity information from VSPs in the shallow subsurface.

Reconnaissance seismic refraction-reflection surveys in northwestern New Mexico

1984 ◽  
Vol 74 (4) ◽  
pp. 1263-1274
Author(s):  
Lawrence H. Jaksha ◽  
David H. Evans
Keyword(s):  
New Mexico ◽  
Wave Velocity ◽  
Lower Crust ◽  
Seismic Waves ◽  
Seismic Refraction ◽  
Velocity Model ◽  
P Wave ◽  
Uppermost Mantle ◽  
P Wave Velocity ◽  
Crustal Thinning

Abstract A velocity model of the crust in northwestern New Mexico has been constructed from an interpretation of direct, refracted, and reflected seismic waves. The model suggests a sedimentary section about 3 km thick with an average P-wave velocity of 3.6 km/sec. The crystalline upper crust is 28 km thick and has a P-wave velocity of 6.1 km/sec. The lower crust below the Conrad discontinuity has an average P-wave velocity of about 7.0 km/sec and a thickness near 17 km. Some evidence suggests that velocity in both the upper and lower crust increases with depth. The P-wave velocity in the uppermost mantle is 7.95 ± 0.15 km/sec. The total crustal thickness near Farmington, New Mexico, is about 48 km (datum = 1.6 km above sea level), and there is evidence for crustal thinning to the southeast.

scholarly journals P-wave velocity and density structure beneath Mt. Vesuvius: a magma body in the upper edifice?

2013 ◽  
Vol 56 (4) ◽  
Author(s):  
Paolo Capuano ◽  
Guido Russo ◽  
Roberto Scarpa
Keyword(s):  
High Resolution ◽  
Wave Velocity ◽  
Gravity Data ◽  
High Energy ◽  
P Wave ◽  
Gravity Inversion ◽  
Density Structure ◽  
Resolution Image ◽  
High Resolution Image ◽  
P Wave Velocity

<p>A high-resolution image of the compressional wave velocity and density structure in the shallow edifice of Mount Vesuvius has been derived from simultaneous inversion of travel times and hypocentral parameters of local earthquakes and from gravity inversion. The robustness of the tomography solution has been improved by adding to the earthquake data a set of land based shots, used for constraining the travel time residuals. The results give a high resolution image of the P-wave velocity structure with details down to 300-500 m. The relocated local seismicity appears to extend down to 5 km depth below the central crater, distributed into two clusters, and separated by an anomalously high Vp region positioned at around 1 km depth. A zone with high Vp/Vs ratio in the upper layers is interpreted as produced by the presence of intense fluid circulation alternatively to the interpretation in terms of a small magma chamber inferred by petrologic studies. In this shallower zone the seismicity has the minimum energy, whilst most of the high-energy quakes (up to Magnitude 3.6) occur in the cluster located at greater depth. The seismicity appears to be located along almost vertical cracks, delimited by a high velocity body located along past intrusive body, corresponding to remnants of Mt. Somma. In this framework a gravity data inversion has been performed to study the shallower part of the volcano. Gravity data have been inverted using a method suitable for the application to scattered data in presence of relevant topography based on a discretization of the investigated medium performed by establishing an approximation of the topography by a triangular mesh. The tomography results, the retrieved density distribution, and the pattern of relocated seismicity exclude the presence of significant shallow magma reservoirs close to the central conduit. These should be located at depth higher than that of the base of the hypocenter volume, as evidenced by previous studies.</p>

Multi-parameter model building for the Qiuyue structure using four-component ocean-bottom seismometer data

Geophysics ◽  
2021 ◽  
pp. 1-52
Author(s):  
Yuzhu Liu ◽  
Xinquan Huang ◽  
Jizhong Yang ◽  
Xueyi Liu ◽  
Bin Li ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Velocity Analysis ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
Ocean Bottom Seismometer ◽  
Full Waveform ◽  
P Wave Velocity

Thin sand-mud-coal interbedded layers and multiples caused by shallow water pose great challenges to conventional 3D multi-channel seismic techniques used to detect the deeply buried reservoirs in the Qiuyue field. In 2017, a dense ocean-bottom seismometer (OBS) acquisition program acquired a four-component dataset in East China Sea. To delineate the deep reservoir structures in the Qiuyue field, we applied a full-waveform inversion (FWI) workflow to this dense four-component OBS dataset. After preprocessing, including receiver geometry correction, moveout correction, component rotation, and energy transformation from 3D to 2D, a preconditioned first-arrival traveltime tomography based on an improved scattering integral algorithm is applied to construct an initial P-wave velocity model. To eliminate the influence of the wavelet estimation process, a convolutional-wavefield-based objective function for the preprocessed hydrophone component is used during acoustic FWI. By inverting the waveforms associated with early arrivals, a relatively high-resolution underground P-wave velocity model is obtained, with updates at 2.0 km and 4.7 km depth. Initial S-wave velocity and density models are then constructed based on their prior relationships to the P-wave velocity, accompanied by a reciprocal source-independent elastic full-waveform inversion to refine both velocity models. Compared to a traditional workflow, guided by stacking velocity analysis or migration velocity analysis, and using only the pressure component or other single-component, the workflow presented in this study represents a good approach for inverting the four-component OBS dataset to characterize sub-seafloor velocity structures.

Sign in / Sign up

Export Citation Format

Share Document