scholarly journals Simulation and Performance Test Giromill Type Wind Turbine; Case Study Muara Enim, South Sumatra, Indonesia

2021 ◽  
Vol 1 (2) ◽  
pp. 11-18
Author(s):  
Ovi Irawan ◽  
Yohandri Bow ◽  
RD Kusumanto
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Dynamic Load ◽  
Performance Test ◽  
Turbine Blades ◽  
Load Resistance ◽  
Wind Turbine Blades ◽  
Wind Force ◽  
Simulation Results ◽  
And Performance

This research examines the dynamic load resistance of the Giromill type wind turbine to the variable wind speed, which is converted to the value of the force received by the wind turbine blades. The analysis was carried out numerically using Autodesk Inventor Professional 2019 software. The variations in wind speed used were 2.5 m/s with a force value of 0.195 N for the Giromill turbine, at a speed of 3.5 m/s with a force value of 0.274 N, at 4.5 m /s with a Force value of 0.352 N and a wind speed of 5.5 m/s with a force rating of 0.430 N. From the simulation results using the Autodesk Inventor Pro 2019 software, the effect of gravitational force is greater than the wind force in, so stress analysis is mainly caused by gravity while the wind force has no significant impact. The simulation results also have a characteristic that the higher the wind speed, the lower the stress value. In addition to the dynamic load simulation, the author also tries to implement the Giromill wind turbines in Muara Enim district, South Sumatra, Indonesia. The wind turbine blade rotation will be faster, and the Wind Generator will produce a greater voltage if it is supported by sufficient wind speed.

Evaluation of the influence of wind speed and angle of attack on the aerodynamic effect of wind turbine blades

2017 ◽  
Author(s):  
Salete Alves ◽  
Luiz Guilherme Vieira Meira de Souza ◽  
Edália Azevedo de Faria ◽  
Maria Thereza dos Santos Silva ◽  
Ranaildo Silva
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Wind Turbine Blades ◽  
Aerodynamic Effect

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals Remaining Useful Life Estimation of Wind Turbine Blades under Variable Wind Speed Conditions Using Particle Filters

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Bhavana Valeti ◽  
Shamim N. Pakzad
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Remaining Useful Life ◽  
Structural Components ◽  
Wind Turbine Blades ◽  
Average Wind Speed ◽  
Average Wind ◽  
Useful Life ◽  
Variable Wind

Rotor blades are the most complex structural components in a wind turbine and are subjected to continuous cyclic loads of wind and self-weight variation. The structural maintenance operations in wind farms are moving towards condition based maintenance (CBM) to avoid premature failures. For this, damage prognosis with remaining useful life (RUL) estimation in wind turbine blades is necessary. Wind speed variation plays an important role influencing the loading and consequently the RUL of the structural components. This study investigates the effect of variable wind speed between the cutin and cut-out speeds of a typical wind farm on the RUL of a damage detected wind turbine blade as opposed to average wind speed assumption. RUL of wind turbine blades are estimated for different initial crack sizes using particle filtering method which forecasts the evolution of fatigue crack addressing the non-linearity and uncertainty in crack propagation. The stresses on a numerically simulated life size onshore wind turbine blade subjected to the above wind speed loading cases are used in computing the crack propagation observation data for particle filters. The effects of variable wind speed on the damage propagation rates and RUL in comparison to those at an average wind speed condition are studied and discussed.

scholarly journals A Simplified Morphing Blade for Horizontal Axis Wind Turbines

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Weijun Wang ◽  
Stéphane Caro ◽  
Fouad Bennis ◽  
Oscar Roberto Salinas Mejia
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Annual Average ◽  
Average Wind Speed ◽  
Pitch Control ◽  
Average Wind

The aim of designing wind turbine blades is to improve the power capture ability. Since rotor control technology is currently limited to controlling rotational speed and blade pitch, an increasing concern has been given to morphing blades. In this paper, a simplified morphing blade is introduced, which has a linear twist distribution along the span and a shape that can be controlled by adjusting the twist of the blade's root and tip. To evaluate the performance of wind turbine blades, a numerical code based on the blade element momentum theory is developed and validated. The blade of the NREL Phase VI wind turbine is taken as a reference blade and has a fixed pitch. The optimization problems associated with the control of the morphing blade and a blade with pitch control are formulated. The optimal results show that the morphing blade gives better results than the blade with pitch control in terms of produced power. Under the assumption that at a given site, the annual average wind speed is known and the wind speed follows a Rayleigh distribution, the annual energy production of wind turbines was evaluated for three types of blade, namely, morphing blade, blade with pitch control and fixed pitch blade. For an annual average wind speed varying between 5 m/s and 15 m/s, it turns out that the annual energy production of the wind turbine containing morphing blades is 24.5% to 69.7% higher than the annual energy production of the wind turbine containing pitch fixed blades. Likewise, the annual energy production of the wind turbine containing blades with pitch control is 22.7% to 66.9% higher than the annual energy production of the wind turbine containing pitch fixed blades.

Optimal Design of Horizontal Axis Wind Turbine Blades

2008 ◽  
Author(s):  
Ohad Gur ◽  
Aviv Rosen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Design Method ◽  
Turbine Blades ◽  
Horizontal Axis ◽  
Optimization Strategy ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Design Variables

The optimal aerodynamic design of Horizontal Axis Wind Turbine (HAWT) is investigated. The Blade-element/Momentum model is used for the aerodynamic analysis. In the first part of the paper a simple design method is derived, where the turbine blade is optimized for operation at a specific wind speed. Results of this simple optimization are presented and discussed. Besides being optimized for operation at a specific wind speed, without considering operation at other wind speeds, the simple model is also limited in the choice of design goals (cost functions), design variables and constraints. In the second part of the paper a comprehensive design method that is based on a mixed numerical optimization strategy, is presented. This method can handle almost any combination of: design goal, design variables, and constraints. Results of this method are presented, compared with the results of the simple optimization, and discussed.

scholarly journals Acoustic Emissions from Wind Turbine Blades

2019 ◽  
Author(s):  
Vasishta Bhargava ◽  
Rahul Samala
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Power Level ◽  
Turbine Blades ◽  
Acoustic Emissions ◽  
Aerodynamic Noise ◽  
Sound Power ◽  
Wind Turbine Blades ◽  
Blade Length ◽  
Noise Production

Research on broadband aerodynamic noise from wind turbine blades is becoming important in several countries. In this work, computer simulation of acoustic emissions from wind turbine blades are predicted using quasi empirical model for a three-bladed horizontal axis 3 MW turbine with blade length ~47 m. Sound power levels are investigated for source and receiver height of 80 m and 2 m above ground and located at a distance equal to total turbine height. The results are validated using existing experimental data for Siemens SWT-2.3 MW turbine having blade length of 47 m, as well as with 2.5 MW turbine. Aerofoil self-noise mechanisms are discussed in present work and results are demonstrated for wind speed of 8 m/s. Overall sound power levels for 3 MW turbine showed good agreements with the existing experiment data obtained for SWT-2.3 MW turbine. Noise map of single source sound power level, dBA of an isolated blade segment located at 75 %R for single blade is illustrated for wind speed of 8 m/s. The results demonstrated that most of the noise production occurred from outboard section of blade and for blade azimuth positions between 80° and 170°.

scholarly journals Performance Enhancement of Wind Turbine

2019 ◽  
Vol 9 (2) ◽  
pp. 43-46
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Performance Enhancement ◽  
Turbine Blades ◽  
Wind Turbine Blade ◽  
Static Fatigue ◽  
Wind Turbine Blades ◽  
Simulink Model ◽  
Epoxy Material ◽  
And Performance

Wind turbine performance and efficiency used to face big challenges due to the highly random nature of the wind and its own small size. Wind turbine blade geometry has direct implications on the load bearing response and performance of the blade. New Wind Turbine Blade was modelled and detailed analysis was done using Ansys and Matlab. Static, Fatigue, Vibration, Computational Fluid Dynamics and Simulink Analysis was done to compare the performance of both wind turbine blades. Velocity of 83.33 m/sec have been incorporated for analysis. Various different Mathematical Equations and proper methodology was carried out to enhance the performance of Wind Turbine. Simulink Model was designed to optimize the performance of Wind Turbine. High Lift to Drag Parameter is optimized for proper Efficiency of Wind Turbine. Turbine blades are twisted so they can always present an angle that take advantages of the ideal lift-to-drag ratio. Optimization of Tower Design was carried out to enhance the performance of wind turbine. Better energy Production parameter is solved by the analysis and Simulation. Simulink Model was designed to optimize the performance of Wind Turbine. Simulink Output results shows the output of Electromagnetic Torque, Stator Current and Rotor Speed. Stress vs Strain Graph was plotted for both designed wind Turbine blades. Coefficient of drag graph was plotted to conclude the performance of Wind Turbine Blades. Turbulence behaviour is observed for both the wind turbine blades to validate the performance of Wind Turbine blades. Epoxy Material is considered for Wind Turbine blades.

Optimal Design of a Simplified Morphing Blade for Fixed-Speed Horizontal Axis Wind Turbines

2012 ◽  
Author(s):  
Weijun Wang ◽  
Stéphane Caro ◽  
Fouad Bennis ◽  
Oscar Roberto Salinas Mejia
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Energy Production ◽  
Turbine Blades ◽  
Numerical Code ◽  
Wind Turbine Blades ◽  
Annual Average ◽  
Average Wind Speed ◽  
Pitch Control ◽  
Average Wind

The aim of designing the wind turbine blades is to improve the power capture ability. Since the rotor control technology is currently limited to controlling the rotor rotational speed and the pitch of the blades, an increasing concern has been given to the morphing blades. In this paper, a simplified morphing blade is introduced, which has a linear twisted distribution along the span and its shape can be controlled by adjusting the root twisted angle and the tip twisted angle of the blade. Moreover, to evaluate the performances of the wind turbine blades, a numerical code based on the blade element momentum theory is developed and validated. The blade of the NREL Phase VI wind turbine is taken as a reference blade, and the optimization problems associated with the morphing blade and pitch control blade are both formulated. The optimal results show that the morphing blade gives better results than the pitch control blade in terms of produced power. Under the assumption that in a given site, the annual average wind speed is known and the wind speed follows the Rayleigh distribution, we can evaluate the annual energy produced by these three blade types. While the annual average wind speed varies from 5 m/s to 15 m/s, the results show that the optimal morphing blade can increase 23.9 percent to 71.4 percent in annual energy production while the optimal pitch control blade can increase 22.5 percent to 67.4 percent in annual energy production, over the existing twisted pitch fixed blade.

Sign in / Sign up

Export Citation Format

Share Document