Honeybee Response to Landing Guides in Flowers of Smithia hirsuta Dalzell, An Endemic Herb of India

2017 ◽  
Vol 24 (2) ◽  
pp. 93-96
Author(s):  
Arti Garg ◽  
Rajeev Singh
Keyword(s):  
Energy Conservation ◽  
Maximum Energy ◽  
Floral Reward ◽  
Colour Contrast

Honeybees response to landing guide located on flowers of Smithia hirsuta Dalzell, an endemic herb of India is studied. The bees perceive the colour contrast as landing guide which serve as a map to the concealed floral reward, the nectar. Hence they associate these with nectar and forage precision with maximum energy conservation. Detailed taxonomy of S. hirsuta Dalzell is also provided.

EM of rapidly solidified permanent magnets

1992 ◽  
Vol 50 (1) ◽  
pp. 198-199
Author(s):  
Raja K. Mishra
Keyword(s):  
Melt Spinning ◽  
Permanent Magnets ◽  
Dark Field Image ◽  
Dark Field ◽  
Maximum Energy ◽  
Quench Rate ◽  
Maximum Energy Product ◽  
Energy Product ◽  
Annular Dark Field ◽  
Rapidly Solidified

The discovery of a new class of permanent magnets based on Nd2Fe14B phase in the last decade has led to intense research and development efforts aimed at commercial exploitation of the new alloy. The material can be prepared either by rapid solidification or by powder metallurgy techniques and the resulting microstructures are very different. This paper details the microstructure of Nd-Fe-B magnets produced by melt-spinning.In melt spinning, quench rate can be varied easily by changing the rate of rotation of the quench wheel. There is an optimum quench rate when the material shows maximum magnetic hardening. For faster or slower quench rates, both coercivity and maximum energy product of the material fall off. These results can be directly related to the changes in the microstructure of the melt-spun ribbon as a function of quench rate. Figure 1 shows the microstructure of (a) an overquenched and (b) an optimally quenched ribbon. In Fig. 1(a), the material is nearly amorphous, with small nuclei of Nd2Fe14B grains visible and in Fig. 1(b) the microstructure consists of equiaxed Nd2Fe14B grains surrounded by a thin noncrystalline Nd-rich phase. Fig. 1(c) shows an annular dark field image of the intergranular phase. Nd enrichment in this phase is shown in the EDX spectra in Fig. 2.

Parallel Detection of Electron Energy Loss Spectra in Direct Mode

1990 ◽  
Vol 48 (2) ◽  
pp. 82-83
Author(s):  
Eckhard Quandt ◽  
Stephan laBarré ◽  
Andreas Hartmann ◽  
Heinz Niedrig
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Energy Resolution ◽  
Large Angle ◽  
Maximum Energy ◽  
Semiconductor Detectors ◽  
Parallel Detection ◽  
Photodiode Arrays ◽  
Electron Energy Loss ◽  
Electron Energy Loss Spectra

Due to the development of semiconductor detectors with high spatial resolution -- e.g. charge coupled devices (CCDs) or photodiode arrays (PDAs) -- the parallel detection of electron energy loss spectra (EELS) has become an important alternative to serial registration. Using parallel detection for recording of energy spectroscopic large angle convergent beam patterns (LACBPs) special selected scattering vectors and small detection apertures lead to very low intensities. Therefore the very sensitive direct irradiation of a cooled linear PDA instead of the common combination of scintillator, fibre optic, and semiconductor has been investigated. In order to obtain a sufficient energy resolution the spectra are optionally magnified by a quadrupole-lens system.The detector used is a Hamamatsu S2304-512Q linear PDA with 512 diodes and removed quartz-glas window. The sensor size is 13 μm ∗ 2.5 mm with an element spacing of 25 μm. Along with the dispersion of 3.5 μm/eV at 40 keV the maximum energy resolution is limited to about 7 eV, so that a magnification system should be attached for experiments requiring a better resolution.

Spectral and Topographic Microstructure of Brain Alpha Activity During Drowsiness at Sleep Onset and REM Sleep

2000 ◽  
Vol 14 (3) ◽  
pp. 151-158 ◽  
Author(s):  
José Luis Cantero ◽  
Mercedes Atienza
Keyword(s):  
Rem Sleep ◽  
Spectral Component ◽  
Sleep Onset ◽  
Quantitative Information ◽  
Maximum Energy ◽  
Alpha Activity ◽  
The Other ◽  
Classification Algorithms ◽  
Microstructural Properties ◽  
Brain States

Abstract High-resolution frequency methods were used to describe the spectral and topographic microstructure of human spontaneous alpha activity in the drowsiness (DR) period at sleep onset and during REM sleep. Electroencephalographic (EEG), electrooculographic (EOG), and electromyographic (EMG) measurements were obtained during sleep in 10 healthy volunteer subjects. Spectral microstructure of alpha activity during DR showed a significant maximum power with respect to REM-alpha bursts for the components in the 9.7-10.9 Hz range, whereas REM-alpha bursts reached their maximum statistical differentiation from the sleep onset alpha activity at the components between 7.8 and 8.6 Hz. Furthermore, the maximum energy over occipital regions appeared in a different spectral component in each brain activation state, namely, 10.1 Hz in drowsiness and 8.6 Hz in REM sleep. These results provide quantitative information for differentiating the drowsiness alpha activity and REM-alpha by studying their microstructural properties. On the other hand, these data suggest that the spectral microstructure of alpha activity during sleep onset and REM sleep could be a useful index to implement in automatic classification algorithms in order to improve the differentiation between the two brain states.

Habits, hardware, and energy conservation.

1981 ◽  
Vol 36 (4) ◽  
pp. 426-428 ◽  
Author(s):  
Paul C. Stern ◽  
Gerald T. Gardner
Keyword(s):  
Energy Conservation

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

Sign in / Sign up

Export Citation Format

Share Document