Estimating stump volume, stump inside bark diameter and diameter at breast height from stump measurements

1992 ◽  
Vol 68 (5) ◽  
pp. 623-627 ◽  
Author(s):  
Antal Kozak ◽  
Stephen A. Y. Omule

Equations were derived for estimating stump volume, stump inside bark diameter at any given height from ground and diameter at breast height from measured stump height and stump inside bark diameter. The equations were tested on 33 British Columbia commercial tree species groups and the results of four species groups are presented in this paper. This prediction system will play an important role in "waste" or "residue" surveys in British Columbia and in reconstructing the initial stand conditions by estimating diameter at breast height.

1982 ◽  
Vol 58 (3) ◽  
pp. 143-145 ◽  
Author(s):  
Julien P. Demaerschalk ◽  
Stephen A. Y. Omule

A means of estimating tree diameter at breast height from stump measurements has many applications. In this paper, metric equations are derived for estimating diameters at breast height from measured stump heights for all commercial tree species in British Columbia by age class and biogeoclimatic zones. The model found best was the same one as used by Alemdag and Honer (1977) for eleven tree species from eastern and central Canada. This prediction system can be incorporated into any local volume equation to derive a tree volume prediction model based on stump diameter and stump height.


2015 ◽  
Vol 39 (6) ◽  
pp. 985-994 ◽  
Author(s):  
Markus Gastauer ◽  
Marcos Eduardo Guerra Sobral ◽  
João Augusto Alves Meira-Neto

According to its owners, the Forest of Seu Nico (FSN) from the Viçosa municipality, Minas Gerais, Brazil, never has been logged and is therefore considered a primary forest. Nevertheless, the forest patch suffered impacts due to selective wood and non-timber extraction, fragmentation and isolation. Aim of this study was to test if the FSN, despite impacts, preserved characteristics of primary forests, which are elevated percentages of non-pioneer (>90%), animal-dispersed (>80 %), understory (>50%) and endemic species (~40%). For that, all trees with diameter at breast height equal or major than 3.2 cm within a plot of 100 x 100 m were identified. With 218 tree species found within this hectare, the FSN's species richness is outstanding for the region. The percentages of non-pioneer (92 %), animal-dispersed (85 %), understory (55 %) and endemic species (39.2 %) from the FSN fulfill the criteria proposed for primary forest. Therefore, we conclude that the FSN maintained its characteristics as a primary forest which highlights its importance for the conservation of biotic resources in the region, where similar fragments are lacking or not described yet.


2020 ◽  
Vol 11 (1) ◽  
pp. 41-49
Author(s):  
Lucio Di Cosmo ◽  
Patrizia Gasparini

Predicting diameter at breast height (DBH) of trees from stump information may be necessary to reconstruct silvicultural practices, to assess harvested timber and wood, or to estimate forest products’ losses caused by illegal cuttings or natural disasters (disturbances). A model to predict DBH of felled trees was developed by the first Italian National Forest Inventory in 1985 (IFNI85). The model distinguished between the two broad groups of conifers and broadleaves and used stump diameter as the sole quantitative variable. Using an original dataset containing data from about 1200 trees of sixteen species recorded throughout Italy, we assessed the performance of that model. To improve the prediction of the DBH of removed trees over large areas and for multiple species, we developed new models using the same dataset. Performance of the new models was tested through indices computed on cross-validated data obtained through the leave-one-out method. A new model that performs better than the old one was finally selected. Compared to the old NFI model, the selected model improved DBH prediction for fourteen species up to 31.28%. This study proved that species specification and stump height are variables needed to improve the models’ performance and suggested that data collection should be continued to get enhanced models, accurate for different ecological and stand conditions.


2016 ◽  
Vol 32 (6) ◽  
pp. 498-509 ◽  
Author(s):  
Carlos L. O. Cordeiro ◽  
Dilce F. Rossetti ◽  
Rogério Gribel ◽  
Hanna Tuomisto ◽  
Hiran Zani ◽  
...  

Abstract:Amazonian white-sand vegetation has unique tree communities tolerant to nutrient-poor soils of interest for interpreting processes of adaptation in neotropical forests. Part of this phytophysionomy is confined to Late Quaternary megafan palaeo-landforms, thus we posit that sedimentary disturbance is the main ecological factor controlling tree distribution and structuring in this environment. In this study, we characterize the topographic trend of one megafan palaeo-landform using a digital elevation model and verify its relationship to the forest by modelling the canopy height with remote sensing data. We also compare the composition and structure (i.e. canopy height and diameter at breast height) of tree groups from the outer and inner megafan environments based on the integration of remote sensing and floristic data. The latter consist of field inventories of trees ≥ 10 cm dbh using six (500 × 20 m) plots in várzea, terra firme and igapó from the outer megafan and 20 (50 × 20 m) plots in woodlands and forests from the inner megafan. The unweighted pair group method with arithmetic mean (UPGMA) and the non-metric multidimensional scaling (NMDS) were applied for clustering and dissimilarity analyses, respectively. The megafan is a sand-dominated triangular wetland with a topographic gradient of < 15 cm km−1, being more elevated along its axis. The outer megafan has a higher number of tree species (367), taller canopy height (mean of 14.1 m) and higher diameter at breast height (mean of 18.2 cm) than the white-sand forest. The latter records 89 tree species, mean canopy height of 8.4 cm and mean diameter at breast height of 15.3 cm. Trees increase in frequency closer to channels and toward the megafan's axis. The flooded and nutrient-poor sandy megafan substrate favoured the establishment of white-sand vegetation according to the overall megafan topography and morphological heterogeneities inherent to megafan sub-environments.


1976 ◽  
Vol 6 (4) ◽  
pp. 441-447 ◽  
Author(s):  
David A. MacLean ◽  
Ross W. Wein

Biomass accumulation in 12 jack pine and 11 mixed hardwood stands of fire origin ranging in age from 7 to 57 years is presented. Logarithmic equations relating aboveground tree, crown, and stem biomass to tree diameter at breast height are given for eight tree species.


2013 ◽  
Vol 6 (3) ◽  
pp. 196-204

Associations between bivariate variables relative to the unexplained relationships of height-Dbh (diameter at breast height) models were investigated. Seven permanent sample plots measuring 40m by 250m at Omo Forest Reserve were used to assess the relationships between height and diameter at breast height of three tree species as affected by the variables of neighbouring trees. The result showed differences in the coefficient of determination of the bivariate models and multivariate models. The models arrived at for each of the species and for the bivariate models are: Scottelia coriaceae: Ht = 2.59 + 0.473D+ 0.0012D2 for 5cm ≤ D ≤100cm (R2 = 0.70) Sterculia rhinopetala: Ht = 5.96 + 0.467D+ 0.00296D2 for 5cm ≤ D ≤100cm (R2 = 0.77) Strombosia pustulata: Ht = 2.02 + 0.722D+ 0.00581D2 for 5cm ≤ D ≤ 60cm (R2 = 0.81) Where both Ht and D are height and Diameter at breast height. While on the other hand the multivariate models that considered the effect of neighbouring trees are: Scottelia coriaceae: 2 1 2 3 4 Ht = 3.74 + 0.41x −1.14x + 0.205x +1.278x (R = 0.723) Sterculia rhnopetala: 2 1 2 3 4 Ht = 6.18 + 0.2601x +1.163x + 0.438x − 0.442x (R = 0.608) Strombosia pustalata: 2 1 2 3 4 Ht = 6.84 + 0.399x − 0.318x − 0.138x − 0.838x (R = 0.650) x1 = diameter at breast height, x2 = Mean neighbouring tree distance, x3 = Frequency of the neighbouring tree and x4 = Position of the crown.


2002 ◽  
Vol 26 (5) ◽  
pp. 567-571 ◽  
Author(s):  
Albertina Pimentel Lima ◽  
Odilon Pimentel de Lima ◽  
William Ernest Magnusson ◽  
Niro Higuchi ◽  
Francisco Quintiliano Reis

This study investigated the regeneration variation of five commercially valuable tree species in relation to different intensities of felling in fourteen 4-ha plots in an area under experimental forest management. This experiment was carried out in a typical Amazonian tropical forest sample on "terra-firme," in Manaus (AM). Plots were logged 7 and 8 years (1987 and 1988), or 3 years (1993) before the study. All trees with height greater than 2 m, and diameter at breast height (DBH) smaller than 10 cm were measured. Only Aniba hostmanniana, Ocotea aciphylla, Licaria pachycarpa, Eschweilera coriacea and Goupia glabra were sufficiently common for individual analyses. These species have high timber values in the local market. Eight years after logging, the species responded differently to logging intensities. The numbers of individuals of Goupia glabra and Aniba hostmanniana were positively related to the intensity of logging, while Ocotea aciphylla, Licaria pachycarpa, and Eschweilera coriacea showed no statistically significant response. In the most recently (1993) logged areas, Goupia glabra and Aniba hostmanniana had higher numbers of individuals than the control plots.


2008 ◽  
Vol 122 (3) ◽  
pp. 264 ◽  
Author(s):  
Lori L. Natzke ◽  
Richard P. Thiel

Although Porcupines (Erethizon dorsatum) denned in a variety of structures in Sandhill Wildlife Area, Wood County, Wisconsin, hollow living trees predominated (67 percent). Diameter at breast height of den trees was significantly greater than that of trees in the surrounding forest, and den openings in living hollow trees were nearly twice the circumference of Porcupines. Porcupines probably do not prefer certain tree species over others; rather, they select species more prone to heart rot with cavities large enough to house a Porcupine.


1981 ◽  
Vol 57 (4) ◽  
pp. 156-161 ◽  
Author(s):  
J. Harry G. Smith ◽  
A. Kozak

Diameters inside and outside bark from 13 sections were used to define variation in bark percentages for 33 844 trees representing 28 major groups of the commercial tree species of British Columbia. The range of age, height, dbh, and dbh/height associated with each group was determined. Statistical significance of effects of these factors and of up to 12 inventory zones was determined for double bark thickness as a percentage of dbh. Bole bark volumes were compared with wood volumes for trees exceeding two standard deviations of bark percentage at breast height. Thick barked trees were more common and a few have equal portions of wood and bark. Our description of the characteristics of the trees with least or most bark should help guide tree improvement programs. Identification of the extent to which stand factors can influence average bark characteristics may help timber managers grow trees of desired bark proportions.


Sign in / Sign up

Export Citation Format

Share Document