Correlation between Genetic Characteristics, Cell Structure and Material Properties of Moso Bamboo (Phyllostachys edulis (Carriere) J. Houzeau) in Different Areas of China

Moso bamboo (Phyllostachys edulis (Carriere) J. Houzeau), native to China, is one of the most economically and ecologically important bamboo species. Since the economic interests and the strong clonality, it has been widely cultivated in southern China, which inevitably reduces the natural stands and leads to gene loss in this species. In this study, three natural populations of Moso bamboo distributed in Anhui, Guangxi, and Zhejiang province, were used to analyze the correlation between phenotypic traits, cell structure, and material properties from the perspective of phenotypic, genetic, and environmental. Among those traits and properties, fiber width was correlated with wall thickness at breast height and average nodes length under branch positively. Leaf length was correlated positively with fiber lumen diameter and parenchyma lumen diameter. Furthermore, it showed a very close correlation between moisture content, bending strength, modulus of elasticity, and diameter at breast height, clear height, and leaf length. The lumen diameter of fiber cell wall thickness is positively correlated with bending strength and modulus of elasticity. Density is positively correlated with parenchyma cell wall thickness. The experimental design is relatively detailed and representative, and the workload is huge. This study reflects the research objectives with scientific and rational experiments and data. This study will analyze the differences of various indicators from the perspective of genetic to build a bridge between micro-structure and macro-structure for rational utilization of the whole area of Moso bamboo resources in China.

The rediscovery of Carya poilanei (Juglandaceae) after 63 years reveals a new record from China

Despite having been first published in 1941, Carya poilanei (A.Chev.) J.-F.Leroy is only known from three collections in Vietnam, Laos and Thailand. It has not been recollected since then and was long suspected to have become extinct through repeated deforestation events. Here, we report the rediscovery, and meanwhile the first new record in China, of this extremely rare gigantic hickory species at Yunnan province 63 years after its last collection in 1958. Three small patchy subpopulations were found with a total of about 50 adult trees having diameter at breast height (DBH) larger than 60 cm, together with some seedlings and saplings, but the fruit set was low. Based on new and fresh material, we present a revised morphological description of C. poilanei, and an updated distribution map for the species. In addition, we also provide a key for the hickories in China. Lastly, we suggest C. poilanei should be listed as a Critically Endangered (CR) species according to the latest IUCN Red List Categories and Criteria.

Linear and spatial variability of eucalyptus dendrometric attributes correlated with the properties of a Typic Haplustox soil (Oxisol) in the Brazilian savannah

Effects of soil attributes using the geostatistical tool improves the interpretation of specific soil management. Thus, this study aimed to evaluate the physical, chemical, and microbiological properties of a Typical Haplustox (Oxisol), identifying those with the best linear and spatial correlation with eucalyptus (Eucalyptus spp.) vegetative growth. The experiment was conducted at the Teaching, Research, and Extension Farm (FEPE) of the Universidade Estadual Paulista (UNESP), Campus of Ilha Solteira. Thirty-five points spaced 13 meters apart were demarcated for analysis, which were distributed in 5 rows of 7 points each. From each point, 2 soil samples were collected from the 0-10 cm depth layer. The physical, chemical, and microbiological soil properties evaluated were: sand, silt, and clay contents; penetration resistance (PR), gravimetric moisture (GM), real density (RD), microbial biomass carbon (MBC), respirometry (CO2-C), metabolic quotient (qCO2), organic matter content (OM), and hydrogenionic potential (pH). The eucalyptus attributes assessed were: plant height (PH) and circumference at breast height (CBH). Each attribute was analyzed by descriptive statistics using the SAS software. Data frequency distribution was verified by the Shapiro Wilk method, and geospatial changes were analyzed by the GS+ software. The soil property that best explained the variability in eucalyptus dendrometric attributes was real density (RD). Except for RD, all properties did not show spatial dependence (i.e., pure nugget effect), which significantly represents eucalyptus vegetative performance.

Model of mixed effects of height dependence on tree diameters in pine stands

Основными исходными данными для определения запаса служат результаты обмеров диаметров и высот деревьев. Но обмеры диаметров деревьев на высоте груди выполнить намного проще, чем обмеры высот, поэтому ограничиваются замерами высот 15–25 деревьев. Цель исследования – по материалам измерения модельных деревьев в сосновых древостоях выбрать наиболее адекватную простую модель, которая передает зависимость между высотой деревьев и диаметром на высоте груди. Объектом исследования послужили сосновые древостои искусственного происхождения на постоянных пробных площадях в Лесной опытной даче Российского государственного агарного университета – МСХА имени К.А. Тимирязева. В работе используются данные обмеров деревьев на 17 постоянных пробных площадях с 1934 по 2005 гг. Возраст древостоев на момент проведения измерений от 50 до 125 лет. По итогам проведения 77 перечетов массив данных составил 1157 наблюдений. И модель фиксированных эффектов, и модель смешанных эффектов адекватно описали зависимость между высотами и диаметрами деревьев в культурах сосны. Но, как и ожидалось, первая модель имеет худшие значения метрик качества по сравнению со второй. Модель со смешанными эффектами более точно предсказывает значения высот по сравнению с моделью фиксированных эффектов. Недостающие значения высот большого количества деревьев на участке можно вычислить более точно с помощью модели смешанных эффектов, а не применения модели фиксированных эффектов или использования только фиксированной части (средний отклик) модели смешанных эффектов. Применение разработанной модели должно ограничиваться только в тех условиях, к которым относятся экспериментальные материалы The main data for the stock of research results is the diameter of measurements and heights of trees. But measurements of the diameter at breast height are much easier to perform than measurements of heights, therefore, they are limited to measuring the heights of 15–25 trees. The aim of the study is to select the most adequate simple model based on the measurements of model trees in pine antiquities, which conveys the relationship between the height of trees and the diameter at breast height. The object of the study was pine stands of artificial origin on permanent test plots in the Forest Experimental Station Russian State Agararian University – Moscow Timiriazev Agricultural Academy. The work uses data from tree measurements on 17 permanent sample plots from 1934 to 2005. The age of the stands at the time of measurements was from 50 to 125 years. As a result of 77 enumerations, the data array amounted to 1157 observations. Both the fixed effects model and the mixed effects model adequately describe the relationship between heights and diameters of trees in pine stumps. But, as expected, the first model has worse quality metrics than the second. The mixed effects model more accurately predicts heights from the fixed effects model. The missing heights of a large number of trees on a site can be calculated accurately using mixed effects models, rather than using fixed effects models or using only a fixed portion (mean response) of the mixed effects model. The application of the developed model should be limited only in those conditions to which the experimental materials are applied.

A study of the relationship between heights and diameters at breast height in tree stands of Scots pine in the Training and Experimental Forestry of the Leningrad region

Взаимосвязи между высотами деревьев и диаметрами на высоте груди широко применяются при определении запасов и сортиментной структуры древостоев. Для их описания применяются многочисленные математические модели. Сравнительный анализ точности шести моделей на примере древостоев сосны обыкновенной Учебно-опытного лесничества Ленинградской области показал близкую точность каждой из них. При этом для разных пробных площадей наибольшую точность показывали разные модели. Это обуславливает необходимость дальнейших исследований по данной тематике с целью выявления наиболее применимых для различных древесных пород, возрастов и условий местопроизрастаний математических моделей. В практической деятельности часто используются таблицы, составленные с учетом соотношений высот и диаметров на высоте груди в древостоях, основными из которых являются таблицы объемов стволов по разрядам высот и сортиментные таблицы. В рамках исследования было установлено, что фактические зависимости высот деревьев от диаметров на высоте груди отличаются от приведенных в таблицах, что обусловлено индивидуальными особенностями структуры и условий местопроизрастания древостоев. По этой причине разряды высот, определенные для отдельных ступеней толщины, зачастую отличаются от найденных по средним для древостоя высоте и диаметру на высоте груди. Это приводит к расхождениям в найденных с учетом данных двух подходов запасах древостоев, а также выхода и стоимости сортиментов в них. Несмотря на незначительность различий, их наличие свидетельствует о необходимости дальнейших исследований с целью повышения точности определения таксационных показателей древостоев. The relationships between heights and diameters at breast height of trees are widely used in determining of growing stock and assortment structure of stands. Numerous mathematical models are used to describe them. A comparative analysis of the accuracy of six models on the example of tree stands of Scots pine in the Training and Experimental Forestry of the Leningrad region showed the close accuracy of each of them. For different sample plots, however, the highest accuracy was showed by different models. This necessitates further research on this topic in order to identify the most applicable mathematical models for different tree species, ages and habitat conditions. In practice are often used the tables, compiled taking into account the ratios of heights and diameters at breast height in tree stands, the main of which are tables of volumes of trees by height ranks and assortment tables. Within the framework of the study, it was found that the actual relationships between tree heights and diameters at breast height differ from those given in the tables, which is due to the individual features of the stand structure and habitat conditions. For this reason, the height ranks, determined for individual diameter classes often differ from those found for the average tree stand height and diameter at breast height. This leads to discrepancies in the growing stocks of tree stands, found taking into account these two approaches, as well as the yield and cost of assortments in them. Although the differences are insignificant, they highlight the need for further research in order to improve the accuracy of determining the inventory parameters of tree stands

Yield and crown structure characteristics in a red oak (Quercus rubra L.) stand: Case study

The paper provides the results of a detailed analysis of timber volume and several important crown variables of red oak (Quercus rubra L.) based on an experimental plot in eastern Hungary. At the age 32 years the crop trees belonged to different height classes. If the volume of the mean tree from height class I was considered as 100%, the volume of the mean tree of class II was 59%, and the mean tree of class III was only 36%. It appeared that there was a significant correlation between crown indices and yield. For this reason, diameter at breast height showed a positive linear correlation with crown diameter (R2= 0.6211). Additionally, there was also positive linear relationship between crown diameter and volume (R2= 0.6908). The variation of crown indices is height even within the same stand and indicates the importance of following a selective thinning operation method.

Determining Harvester Productivity Curves of Thinning Operations in Birch Stands of Central Europe

Silver birch (Betula pendula Roth) is a popular tree species forming stands in nearly the whole of Europe. In Poland, birch is one of the most representative broadleaved species growing on rather poor soils, very often as a mix species with Scots pine (Pinus sylvestris L.). In Central Europe, birch forms trunk often with sweeps, and at the older age with thick branches. Due to that, a harvester thinning operation in birch stands can be challengeable when trying to process logs from the top part of trees, which can finally impact on productivity. The objective of this research was to determine harvester productivity for birch with particular attention to production of logs from the top part of a tree. The research was carried out in stands of North and North-West Poland. All together 21 tests were completed in 16 stands, in which 9 harvesters were used (8 different models). The mean diameter of harvested trees was 23.7 cm with the mean height of 21.7 m. Obtained productivity without delays was on average 21.98 m3 h-1 and varied from as low as 5.14 to maximum 44.66 m3 h-1, and depended mainly on harvested tree size. It was also confirmed that top diameter of the last log depended on diameter at breast height (DBH). The model developed based on that relationship can be used for prediction of biomass volume from birch stands when harvesters are used for thinning.

Assessment of Open Grown Trees Composition and Diversity in Selected Research Institutes in Peri-Urban Ibadan, Oyo state, Nigeria

Urban green spaces are rapidly deteriorating in most parts of Nigeria. The study assessed open grown trees composition and diversity in selected Research Institutes within Ibadan Region with the aim of comparing the ecological diversity in the study locations. This was achieved through species identification and mensuration of all open grown trees species that were accessible in the study areas. Open grown trees with Diameter at breast height ≥ 10cm were assessed for growth characteristics of total height and diameter at breast height. Basal area and volume were estimated from measured growth characteristics. Tree species were identified by a taxonomist at Federal Herbarium in Ibadan. Biodiversity indices of Shannon diversity index, species evenness and species dominance were computed to see variation in tree community of the areas. The Shannon diversity index calculated was higher in IITA with a value of 3.04 compared to that of CRIN with a value of 2.36. A dominance value of 0.15 and 0.05 was obtained for CRIN and IITA respectively. The study concludes that both institutes are repository of large diversity of tree species thereby, helping in the conservation of biodiversity while ameliorating weather. It is recommended that educational institutions from all levels located within the region as well as private organizations and individuals should plant trees within their domains in order to create conducive green environments that would promote sustainable environment in the region. This is possible when government provide adequate incentive and annual rewards for establishments with the best green environments.