scholarly journals Impact of Superplasticizer on Rheological Properties and Hardening Process of Different Portland Cement Pastes

2015 ◽  
Vol 21 (1) ◽  
Author(s):  
Jadvyga Žvironaitė ◽  
Modestas Kligys ◽  
Ina Pundienė ◽  
Jolanta Pranckevičienė
2013 ◽  
Vol 52 (7) ◽  
pp. 707-718 ◽  
Author(s):  
Xiangming Kong ◽  
Yanrong Zhang ◽  
Shanshan Hou

2017 ◽  
Vol 139 ◽  
pp. 703-709 ◽  
Author(s):  
W.H. Juimo Tchamdjou ◽  
M.L. Abidi ◽  
T. Cherradi ◽  
L.A. Pereira de Oliveira

2014 ◽  
Vol 5 (4) ◽  
pp. 175-181 ◽  
Author(s):  
Mindaugas Macijauskas ◽  
Albinas Gailius

The article aims to research the influence of the chemical admixtures on the rheological properties of Portland cement paste and determine their impact on the effectiveness of hydration induction period. Materials used in the study: Portland cement CEM I 42.5 (N and R early strength), limestone Portland cement CEM II/A-LL 42.5 N, plasticizer Centrament N3, the latest generation superplasticizer MC-PowerFlow 3140 and water. Investigations focused on effects of Plasticizer and superplasticizer on water and cement (W/C) ratio and Portland cement paste flow characteristics. Portland cement pastes with the same watercement ratio with and without chemical admixtures were tested. Investigations were carried out using a Suttard viscometer and rotation viscometer Rheotest NH 4.1 with coaxial cylinders. It was observed that viscosity of Portland cement paste can be controlled by chemical admixtures during the hydration induction period. Investigations of effectiveness of the chemical admixtures on the rheological properties of the Portland cement pastes, comparing it with a control composition of the Portland cement paste were provided in the article. Diagrams show changes of the viscosity of the Portland cement pastes depending on the type and amount of the used chemical admixtures. Obtained results were compared with the same consistence without admixtures. After making the regressive analysis of research results of Portland cement paste with and without chemical admixtures, empirical equations were produced. Santrauka Šio darbo tikslas – ištirti cheminių įmaišų poveikį reologinėms portlandcemenčio tešlų savybėms ir nustatyti jų poveikio veiksmingumą indukcinio hidratacijos periodo metu. Tyrimams naudotos šios medžiagos: AB „Akmenės cementas“ gamyklos portlandcementis CEM I 42,5 (N ir R ankstyvojo stiprumo), klinties portlandcementis CEM II/A-LL 42,5 N, plastiklis Centrament N3, naujausios kartos superplastiklis MC-PowerFlow 3140 ir vanduo. Ištirtas plastiklio ir superplastiklio poveikis vandens ir cemento (V/C) santykio pokyčiams ir portlandcemenčio tešlų sklidumui naudojant Sutardo viskozimetrą. Buvo tiriamos vienodo vandens ir cemento santykio portlandcemenčio tešlos su cheminėmis įmaišomis ir be jų. Tyrimai atlikti naudojant rotacinį viskozimetrą Rheotest NH 4.1 su bendraašiais cilindrais. Nustatytas cheminių įmaišų portlandcemenčio tešlose veiksmingumas. Pastebėta, kad portlandcemenčio tešlų dinaminė klampa gali būti reguliuojama cheminėmis įmaišomis viso indukcinio hidratacijos periodo metu. Atlikus portlandcemenčio tešlų su cheminėmis įmaišomis ir be jų tyrimų rezultatų regresinę analizę, gautos empirinės lygtys.


2017 ◽  
Vol 904 ◽  
pp. 167-173
Author(s):  
Mindaugas Macijauskas ◽  
Gintautas Skripkiūnas

The article aims to present a research into the impact of the dosage and effectiveness of superplasticizers based on modified acrylic polymer and polycarboxylate ester (from 0 to 1.2 %) on rheological properties of the cement pastes (yield stresses and plastic viscosities), of different testing times after mixing (from 0 to 90 min). Materials used in the study: Portland cement CEM I 42.5 R, superplasticizers SP1 (modified acrylic polymer based), SP2 (polycarboxylate ester based), and water. Investigation was carried out using rotational rheometer Rheotest RN4.1 with coaxial cylinders. The tests revealed that superplasticizer SP2 is more effective than SP1 – cement paste (W/C = 0.30) exhibits better flowability and improved rheological qualities. Superplasticizers SP1 and SP2 exhibit different levels of plasticizing effectiveness and ability to retain the effect’s duration. Due to the increase in the dosage of superplasticizers SP1 and SP2 from 0 to 1.2 %, plasticizing effect increases. It is also observed that larger dosage of SP1 (0.6-1.2 %) results in slower increase in plasticizing effects until the 90 min margin. In conclusion, from the start of mixing until the 90 min margin, the best plasticizing effect and its retention achieved by superplasticizer SP2. Recommended SP2 dosage – from 0.6 to 0.8 %.


2017 ◽  
Vol 139 ◽  
pp. 696-702 ◽  
Author(s):  
W.H. Juimo Tchamdjou ◽  
T. Cherradi ◽  
M.L. Abidi ◽  
L.A. Pereira de Oliveira

2014 ◽  
Vol 1000 ◽  
pp. 39-42
Author(s):  
Martin Boháč ◽  
Tomáš Opravil ◽  
Eva Bartoníčková ◽  
Františka Frajkorová ◽  
Martin Palou

Viscoelastic properties of Portland cement-metakaolin fresh pastes were measured using rotational rheometer. In mixtures 10 % of Portland cement was replaced by various fractions of metakaolin with different particle size distribution. The role of the fineness of metakaolin was revealed characterizing flow, adhesion and creep of the fresh pastes.


1970 ◽  
Author(s):  
Marc Z. Jeric ◽  
Herbert B. Nottage

1973 ◽  
Vol 3 (3) ◽  
pp. 279-293 ◽  
Author(s):  
Stephen Brunauer ◽  
Jan Skalny ◽  
Ivan Odler ◽  
Marvin Yudenfreund

2021 ◽  
Vol 288 ◽  
pp. 123053
Author(s):  
Saulo Rocha Ferreira ◽  
Neven Ukrainczyk ◽  
Keoma Defáveri do Carmo e Silva ◽  
Luiz Eduardo Silva ◽  
Eduardo Koenders

Sign in / Sign up

Export Citation Format

Share Document