scholarly journals Magnetic Separation of Impurities from Hydrometallurgy Solutions and Waste Water Using Magnetic Iron Ore Seeding

2020 ◽  
Author(s):  
Haisheng Han ◽  
Wenjuan Sun ◽  
Wei Sun ◽  
Yuehua Hu

2015 ◽  
Vol 1094 ◽  
pp. 397-400
Author(s):  
Xian Xie ◽  
Zi Xuan Yang ◽  
Xiong Tong ◽  
Ji Yong Li

Iron ore minerals are mainly silicate-type iron minerals in raw ore, and its distribution rate was 51.93%; followed by magnetic iron, and its distribution rate was 36.81%; content and distribution rate of other minerals was very low; element grade of iron, phosphorus, sulfur, silica were 11.90%, 0.043%, 0.013% and 45.23%, the main gangue were silica and calcium oxide, recyclable iron minerals mainly is magnetic iron mineral. Due to the grade of iron of raw ore and the amounts of optional magnetite was relatively little, in order to investigate the optional of low-grade ore, weak magnetic separation test and weak magnetic separation tailings-strong magnetic separation test were put into effect.



2021 ◽  
pp. 81-86
Author(s):  
V. I. Grinenko ◽  
A. S. Opalev ◽  
P. V. Maevsky ◽  
I. V. Karpov


2012 ◽  
Vol 454 ◽  
pp. 221-226 ◽  
Author(s):  
Peng Gao ◽  
Yue Xin Han ◽  
Yong Sheng Sun ◽  
Yu Fan Mu

The composition of Deoxidized Samples of Bayan Obo Oxidized Iron Ore is complex with high content of residual reducing C, Fe phase in the RDP is ferrous metal what is hard and malleable resulting in pessimistic grindability. Gravity-magnetic separation process flow is adopted with C pre-rejecting, stage grinding (-0.074mm -57.18%, -0.074mm -85.66%) and coarse-fine fraction separate treatment base on RDP process characteristic. The final concentrate has 92.02% Fe with 93.27% Fe recovery, 94.18% Fe metallization which may utilize as rough materials for steelmaking and the final tailings has 15.10% REO with 97.15% REO recovery which may utilize as rough materials for REO concentration.



2011 ◽  
Vol 314-316 ◽  
pp. 823-828
Author(s):  
Lei Wang ◽  
Jie Li ◽  
Bao Wei Li ◽  
Jun Wang

In this paper, the method of “floatation—microwave magnetic roasting—low intensity magnetic separation” which aims to utilize the iron and Nb mineral in the Bayan Obo tailings was investigated. The results show that the method of “floatation—microwave magnetic roasting—magnetic separation” is effective and simple, and the recovery of iron and Nb in the whole process is up to 80% and 68% respectively. The step of microwave magnetic roasting is researched carefully, and the best magnetic roasting result is obtained at 650°C, and the roasting time is 10min.The best result of magnetic separation is obtained at the magnetic intensity of 220KA/m. Iron ore concentrate separated by magnetic separation can be used for iron making directly because the grade can reach about 62~64.4%. And the grade of Nb can reach up to 2.16%.



2012 ◽  
Vol 47 (8) ◽  
pp. 1129-1138 ◽  
Author(s):  
S. I. Angadi ◽  
Ho-Seok Jeon ◽  
A. Mohanthy ◽  
S. Prakash ◽  
B. Das


2014 ◽  
Vol 49 (12) ◽  
pp. 1927-1936 ◽  
Author(s):  
S. S. Rath ◽  
H. Sahoo ◽  
N. Dhawan ◽  
D. S. Rao ◽  
B. Das ◽  
...  


2012 ◽  
Vol 549 ◽  
pp. 998-1001
Author(s):  
Si Qing Liu ◽  
Peng Li ◽  
Shu Ming Wen ◽  
Dian Wen Liu

Large amount of sourrounding rocks in Jianshui China has been discarded for many years, and the “rock” is characterized by Cu-Fe polymetallic constituents and of low grade. According to the results of chemical and phase analysis as well as the mineralogy, a joint pocess of flotation and magnetic separation was proposed and used to process the ore. Flotation results show that the combined processing technology is efficient in utilizing the low grade rocks. A copper concentrate assaying 20.68% Cu at the recovery of 80.11% can be obtained, when the raw material assays 0.79% Cu.



2014 ◽  
Vol 136 ◽  
pp. 223-232 ◽  
Author(s):  
Mamdouh Omran ◽  
Timo Fabritius ◽  
Ahmed M. Elmahdy ◽  
Nagui A. Abdel-Khalek ◽  
Mortada El-Aref ◽  
...  


2011 ◽  
Vol 304 ◽  
pp. 387-390 ◽  
Author(s):  
Wei Zhi Wang ◽  
Jin Rui Zhang ◽  
Chun Guang Yang

An iron ore contains specularite and hematite which are its main iron minerals. And its main gangue minerals are specularite, part of the clay material and a small amount of quartz.Tests are made on the ore by adopting processes including gravity separation, high intensity magnetic separation, high intensity magnetic-gravity separation and high intensity magnetic - reverse flotation. The test results show that the separation process of high intensity magnetic-reverse flotation can obtain an iron concentrate grading about 66.62% at a recovery of 58.38% from an iron ore assaying around 35.00% iron, rather good metallurgical performances.



Sign in / Sign up

Export Citation Format

Share Document