scholarly journals Assessment of outdoor radiation levels and radiological health hazards in Emene Industrial Layout of Enugu State, Nigeria

2018 ◽  
Vol 13 (20) ◽  
pp. 265-272 ◽  
Author(s):  
F. O. Ugbede ◽  
I. D. Benson
2019 ◽  
Vol 34 (2) ◽  
pp. 141-152 ◽  
Author(s):  
Wazir Muhammad ◽  
Matiullah ◽  
Asad Ullah ◽  
Sajjad Tahir ◽  
Fawad Ullah ◽  
...  

Abstract In our environment, various naturally occurring radionuclides are present (both underground and overground) in several places, which results in lifelong human exposure. The radiation dose received by human beings from the radiation emitted by these naturally occurring radionuclides is approximately 87%. Exposure to radiation poses radiological health hazards. To assess the human health hazards from radiation, the concentration of these naturally occurring radionuclides are measured in soil (used for cultivation), building materials (soil, bricks, sand, marble, etc.), water and dietary items, worldwide. The available literature revealed that numerous studies related to the subject have been carried out in Pakistan. Most of these studies measured the radioactivity concentrations of primordial [uranium (238U), thorium (232Th), radium (226Ra) and potassium (40K)] and anthropogenic [cesium (137Cs)] radionuclide in soil samples (used for cultivation), fertilizers, building materials (i.e. bricks, rocks, sand, soil, marble, etc.), as well as water and dietary items, using a sodium iodide detector or high purity germanium. An effort was made in 2008 to compile these studies as a review article. However, since then, considerable studies have been undertaken and reported in the literature. Therefore, the main objective of the present article is to provide a countrywide baseline data on radionuclide levels, by overviewing and compiling the relevant studies carried out in Pakistan.


Author(s):  
R. L. Lyles ◽  
S. J. Rothman ◽  
W. Jäger

Standard techniques of electropolishing silver and silver alloys for electron microscopy in most instances have relied on various CN recipes. These methods have been characteristically unsatisfactory due to difficulties in obtaining large electron transparent areas, reproducible results, adequate solution lifetimes, and contamination free sample surfaces. In addition, there are the inherent health hazards associated with the use of CN solutions. Various attempts to develop noncyanic methods of electropolishing specimens for electron microscopy have not been successful in that the specimen quality problems encountered with the CN solutions have also existed in the previously proposed non-cyanic methods.The technique we describe allows us to jet polish high quality silver and silver alloy microscope specimens with consistant reproducibility and without the use of CN salts.The solution is similar to that suggested by Myschoyaev et al. It consists, in order of mixing, 115ml glacial actic acid (CH3CO2H, specific wt 1.04 g/ml), 43ml sulphuric acid (H2SO4, specific wt. g/ml), 350 ml anhydrous methyl alcohol, and 77 g thiourea (NH2CSNH2).


1992 ◽  
Vol 37 (3) ◽  
pp. 267-267
Author(s):  
Thomas D. Oakland
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document