scholarly journals Finite element model of circularly curved Timoshenko beam for in-plane vibration analysis

2021 ◽  
Vol 49 (3) ◽  
pp. 615-626
Author(s):  
Azin Nadi ◽  
Mehdi Raghebi
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Element Model ◽  
Beam Element ◽  
Polar Coordinate System ◽  
Curved Beam ◽  
Plane Vibration ◽  
Curved Timoshenko Beam

Curved beams are used so much in the arches and railway bridges and equipments for amusement parks. There are few reports about the curved beam with the effects of both the shear deformation and rotary inertias. In this paper, a new finite element model investigates to analyze In-Plane vibration of a curved Timoshenko beam. The Stiffness and mass matrices of the curved beam element was obtained from the force-displacement relations and the kinetic energy equations, respectively. Assembly of the elemental property matrices is simple and without need to transformation matrix because of using the local polar coordinate system. The natural frequencies of curved Euler-Bernoulli beam with large thickness are not sufficiently accurate. In this case, using the curved Timoshenko beam element is necessary. Moreover, the influence of vibration absorber is discussed on the natural frequencies of the curved beam.

Finite element bending analysis of symmetric and non-symmetric functionally graded sandwich beams using a novel parabolic shear deformation theory

2021 ◽  
pp. 146442072110050
Author(s):  
Mohamed-Ouejdi Belarbi ◽  
Abdelhak Khechai ◽  
Aicha Bessaim ◽  
Mohammed-Sid-Ahmed Houari ◽  
Aman Garg ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Element Model ◽  
Beam Element ◽  
Functionally Graded ◽  
Sandwich Beams

In this paper, the bending behavior of functionally graded single-layered, symmetric and non-symmetric sandwich beams is investigated according to a new higher order shear deformation theory. Based on this theory, a novel parabolic shear deformation function is developed and applied to investigate the bending response of sandwich beams with homogeneous hardcore and softcore. The present theory provides an accurate parabolic distribution of transverse shear stress across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the functionally graded sandwich beam without using any shear correction factors. The governing equations derived herein are solved by employing the finite element method using a two-node beam element, developed for this purpose. The material properties of functionally graded sandwich beams are graded through the thickness according to the power-law distribution. The predictive capability of the proposed finite element model is demonstrated through illustrative examples. Four types of beam support, i.e. simply-simply, clamped-free, clamped–clamped, and clamped-simply, are used to study how the beam deflection and both axial and transverse shear stresses are affected by the variation of volume fraction index and beam length-to-height ratio. Results of the numerical analysis have been reported and compared with those available in the open literature to evaluate the accuracy and robustness of the proposed finite element model. The comparisons with other higher order shear deformation theories verify that the proposed beam element is accurate, presents fast rate of convergence to the reference results and it is also valid for both thin and thick functionally graded sandwich beams. Further, some new results are reported in the current study, which will serve as a benchmark for future research.

Support-Condition Analyses of Rotating Beams Under Distributed Imbalance Loading

2011 ◽  
Author(s):  
Kai Jokinen ◽  
Erno Keskinen ◽  
Marko Jorkama ◽  
Wolfgang Seemann
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Cross Section ◽  
Cross Sections ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Constant Cross Section ◽  
Support Condition ◽  
Beam Elements

In roll balancing the behaviour of the roll can be studied either experimentally with trial weights or, if the roll dimensions are known, analytically by forming a model of the roll to solve response to imbalance. Essential focus in roll balancing is to find the correct amount and placing for the balancing mass or masses. If this selection is done analytically the roll model used in calculations has significant effect to the balancing result. In this paper three different analytic methods are compared. In first method the mode shapes of the roll are defined piece wisely. The roll is divided in to five parts having different cross sections, two shafts, two roll ends and a shell tube of the roll. Two boundary conditions are found for both supports of the roll and four combining equations are written to the interfaces of different roll parts. Totally 20 equations are established to solve the natural frequencies and to form the mode shapes of the non-uniform roll. In second model the flexibility of shafts and the stiffness of the roll ends are added to the support stiffness as serial springs and the roll is modelled as a one flexibly supported beam having constant cross section. Finally the responses to imbalance of previous models are compared to finite element model using beam elements. Benefits and limitations of each three model are then discussed.

Hydroelastic Modal Analysis of the Perforated Cylindrical Shell in SMART

2011 ◽  
Author(s):  
Youngin Choi ◽  
Seungho Lim ◽  
Kyoung-Su Park ◽  
No-Cheol Park ◽  
Young-Pil Park ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Steam Generators ◽  
Structure Interaction ◽  
The Finite Element Model ◽  
Reactor Internals

The System-integrated Modular Advanced ReacTor (SMART) developed by KAERI includes components like a core, steam generators, coolant pumps, and a pressurizer inside the reactor vessel. Though the integrated structure improves the safety of the reactor, it can be excited by an earthquake and pump pulsations. It is important to identify dynamic characteristics of the reactor internals considering fluid-structure interaction caused by inner coolant for preventing damage from the excitations. Thus, the finite element model is constructed to identify dynamic characteristics and natural frequencies and mode shapes are extracted from this finite element model.

Thermal Robustness Assessment of a Rigidized Space Inflatable Boom via Experimental Modal Analysis and Finite Element Modeling

2010 ◽  
Author(s):  
Matthew Daly ◽  
Armaghan Salehian ◽  
Alireza Doosthoseini
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Frequency Response Function ◽  
Good Accuracy ◽  
Natural Frequencies ◽  
Beam Theory ◽  
Element Model ◽  
Modal Testing ◽  
Environmental Temperatures ◽  
Robustness Assessment

The following paper presents the results of a thermal robustness assessment of a rigidized space inflatable boom. Modal testing is performed at three different environmental temperatures; spanning a range of 38°C, with the purpose of characterizing dynamic behavior and assessing changes in bending frequencies. Experimental results show that the natural frequencies of the boom shift only marginally within the tested bandwidth. A finite element model is developed in parallel with experiments to determine compatibility with beam theory. The resulting simulation shows that linear beam theory can be used to predict bending frequencies and frequency response function magnitudes with very good accuracy.

Natural Vibrations of a Clamped-Clamped Arch With an Open Transverse Crack

1997 ◽  
Vol 119 (2) ◽  
pp. 145-151 ◽  
Author(s):  
M. Krawczuk ◽  
W. Ostachowicz
Keyword(s):  
Finite Element ◽  
Stiffness Matrix ◽  
Edge Crack ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Curved Beam ◽  
Natural Vibrations ◽  
Crack Location ◽  
Cracked Arch

The paper presents a finite element model of the arch with a transverse, one-edge crack. A part of the cracked arch is modelled by a curved beam finite element with the crack. Parts of the arch without the crack are modelled by noncracked curved beam finite elements. The crack occurring in the arch is nonpropagating and open. It is assumed that the crack changes only the stiffness of the arch, whereas the mass is unchanged. The method of the formation of the stiffness matrix of a curved beam finite element with the crack is presented. The effects of the crack location and its length on the changes of the in-plane natural frequencies and mode shapes of the clamped-clamped arch are studied.

Finite Element Model Updating Approach to Damage Identification in Beams Using Particle Swarm Optimization

2008 ◽  
Author(s):  
Mohamed M. Saada ◽  
Mustafa H. Arafa ◽  
Ashraf O. Nassef
Keyword(s):  
Finite Element ◽  
Particle Swarm Optimization ◽  
Finite Element Model ◽  
Natural Frequencies ◽  
Damage Identification ◽  
Model Updating ◽  
Particle Swarm ◽  
Element Model ◽  
Pso Algorithm ◽  
Swarm Optimization

The use of vibration-based techniques in damage identification has recently received considerable attention in many engineering disciplines. While various damage indicators have been proposed in the literature, those relying only on changes in the natural frequencies are quite appealing since these quantities can conveniently be acquired. Nevertheless, the use of natural frequencies in damage identification is faced with many obstacles, including insensitivity and non-uniqueness issues. The aim of this paper is to develop a viable damage identification scheme based only on changes in the natural frequencies and to attempt to overcome the challenges typically encountered. The proposed methodology relies on building a Finite Element Model (FEM) of the structure under investigation. A modified Particle Swarm Optimization (PSO) algorithm is proposed to facilitate updating the FEM in accordance with experimentally-determined natural frequencies in order to predict the damage location and extent. The method is tested on beam structures and was shown to be an effective tool for damage identification.

Sign in / Sign up

Export Citation Format

Share Document