Abstract
Since the modern design trend of low pressure turbine blades for aeronautical propulsion leads to lighter and more loaded blades, thus prone to flutter induced vibrations; flutter assessment is now a standard verification within the design loop of these components. Flutter stability assessment requires FEM and CFD tools able to predict the pressure response of fluid flow due to blade oscillation in order to compute the aerodynamic damping. Such tools are mature and validated, yet some geometrical aspects of the blade-row as contact interfaces at the blade tip shroud have to be carefully simulated to obtain accurate flutter results. The aim of this paper is to demonstrate the capability of the Open Source FEM tool (CalculiX) to deal with complex interlocked rotor geometries when performing modal analysis and to show the influence of different contact interface modeling on flutter stability. The solid mesh of a single-pitch row sector has been generated by using the Open Source suite Salome and the modal analysis has been carried out with CalculiX with cyclic symmetry conditions. The following uncoupled flutter simulations have been performed with the CFD TRAF code, an in-house solver developed at the University of Florence, which implements a non-linear method for flutter evaluation. An in-depth comparison among the FEM models with different boundary conditions in terms of mode shape frequency and aerodynamic damping curves are reported. These results show the effect of different contact interface models, especially on the first bending mode family, and confirm the overall row stability detected during a dedicated experimental flutter campaign.
Validation of the Open Source Code_Aster Software Used in the Modal Analysis of the Fluid-filled Cylindrical Shell
