Degradation Mechanism of HfAlOX/SiO2 Stacked Gate Dielectric Films through Transient and Steady State Leakage Current Analysis

2004 ◽  
Author(s):  
Kenji Okada ◽  
Wataru Mizubayashi ◽  
Naoki Yasuda ◽  
Hiroyuki Ota ◽  
Koji Tominaga ◽  
...  
2005 ◽  
Vol 97 (7) ◽  
pp. 074505 ◽  
Author(s):  
Kenji Okada ◽  
Wataru Mizubayashi ◽  
Naoki Yasuda ◽  
Hiroyuki Ota ◽  
Koji Tominaga ◽  
...  

2015 ◽  
Vol 815 ◽  
pp. 30-35
Author(s):  
Ling Yan Shen ◽  
Xin Hong Cheng ◽  
Zhong Jian Wang ◽  
Duo Cao ◽  
Li Zheng ◽  
...  

Metal-insulator-semiconductor (MIS) diodes with Si3N4/Al2O3 bilayer gate dielectric films deposited on an AlGaN/GaN heterostructure were fabricated, where the Si3N4 layer played a role of etching stopped layer to protect the Al2O3 film from being damaged. Compared with traditional Schottky diodes, a distinct suppression of gate leakage current was achieved for the MIS diodes both at forward and reverse bias, and the dominant leakage current mechanism is Fowler–Nordheim tunneling. The 2DEG density extracted from C-V curves was 3~7 ́1013cm-2, in the same order of magnitude as Schottky diodes and hall measurement. Although the existence of the bilayer dielectric did not affect the 2DEG density at the interface of AlGaN/GaN, Si3N4 layer shared more gate bias and led to more gate bias required to deplete 2DEG and turn down the devices, moreover, Si3N4 layer had no effect on suppressing the forward or reverse gate leakage current due to its narrow band gap width and band bending compared with a single Al2O3 film. The experimental results provided a reference for the design of gate dielectric film structure for AlGaN/GaN high-electron-mobility transistors (HEMTs).


Author(s):  
Bunseng Chan ◽  
Charlie Soh ◽  
Kang Eng Siew ◽  
Hui Seng Kheong ◽  
Lim Wei Jer ◽  
...  

2004 ◽  
Vol 7 (11) ◽  
pp. G254 ◽  
Author(s):  
Hong Bae Park ◽  
Moonju Cho ◽  
Jaehoo Park ◽  
Suk Woo Lee ◽  
Tae Joo Park ◽  
...  

2019 ◽  
Vol 39 (2) ◽  
pp. 262-271
Author(s):  
Yukan Hou ◽  
Yuan Li ◽  
Yuntian Ge ◽  
Jie Zhang ◽  
Shoushan Jiang

Purpose The purpose of this paper is to present an analytical method for throughput analysis of assembly systems with complex structures during transients. Design/methodology/approach Among the existing studies on the performance evaluation of assembly systems, most focus on the system performance in steady state. Inspired by the transient analysis of serial production lines, the state transition matrix is derived considering the characteristics of merging structure in assembly systems. The system behavior during transients is described by an ergodic Markov chain, with the states being the occupancy of all buffers. The dynamic model for the throughput analysis is solved using the fixed-point theory. Findings This method can be used to predict and evaluate the throughput performance of assembly systems in both transient and steady state. By comparing the model calculation results with the simulation results, this method is proved to be accurate. Originality/value This proposed modeling method can depict the throughput performance of assembly systems in both transient and steady state, whereas most exiting methods can be used for only steady-state analysis. In addition, this method shows the potential for the analysis of complex structured assembly systems owing to the low computational complexity.


Sign in / Sign up

Export Citation Format

Share Document