Pulse Arrival Time Measurement with Finger-Based ECG and Trans-Nail PPG Circuits for Cuffless Blood Pressure Monitoring

2018 ◽  
Author(s):  
K.M. Lee ◽  
Z. Qian ◽  
R. Yabuki ◽  
H. Kino ◽  
T. Fukushima ◽  
...  
2019 ◽  
Vol 8 (11) ◽  
pp. 1773 ◽  
Author(s):  
Joonnyong Lee ◽  
Seungman Yang ◽  
Saram Lee ◽  
Hee Chan Kim

As non-invasive continuous blood pressure monitoring (NCBPM) has gained wide attraction in the recent decades, many pulse arrival time (PAT) or pulse transit time (PTT) based blood pressure (BP) estimation studies have been conducted. However, most of the studies have used small homogeneous subject pools to generate models of BP based on particular interventions for induced hemodynamic change. In this study, a large open biosignal database from a diverse group of 2309 surgical patients was analyzed to assess the efficacy of PAT, PTT, and confounding factors on the estimation of BP. After pre-processing the dataset, a total of 6,777,308 data pairs of BP and temporal features between electrocardiogram (ECG) and photoplethysmogram (PPG) were extracted and analyzed. Correlation analysis revealed that PAT or PTT extracted from the intersecting-tangent (IT) point of PPG showed the highest mean correlation to BP. The mean correlation between PAT and systolic blood pressure (SBP) was −0.37 and the mean correlation between PAT and diastolic blood pressure (DBP) was −0.30, outperforming the correlation between BP and PTT at −0.12 for SBP and −0.11 for DBP. A linear model of BP with a simple calibration method using PAT as a predictor was developed which satisfied international standards for automatic oscillometric BP monitors in the case of DBP, however, SBP could not be predicted to a satisfactory level due to higher errors. Furthermore, multivariate regression analyses showed that many confounding factors considered in previous studies had inconsistent effects on the degree of correlation between PAT and BP.


2021 ◽  
Vol 2071 (1) ◽  
pp. 012028
Author(s):  
W S Wan Zaki ◽  
R Correia ◽  
S Korposh ◽  
B R Hayes-Gill ◽  
S P Morgan

Abstract Pulse arrival time (PAT) is the delay time between the peak of the R-wave Electrocardiogram (ECG) signal and the peak of Photoplethysmogram (PPG) signals. This method is widely exploited for continuous cuffless blood pressure measurement. In the literature, the PAT was determined based on the mean at a certain number or certain period of heartbeats, but none of them deployed a single pulse wave for PAT calculation. Therefore, in this paper, a relationship between mean PAT (15 pulses ± Standard Deviation (SD)) and instantaneous PAT (a pulse) with blood pressure (BP) was investigated on thirteen healthy male volunteers (aged between 17 to 42 years) through a pedal exercise. The PAT is grouped into three (3) categories which depend on the spatial position of the PPG signal measured; finger (PATf), wrist (PATw), and underfoot (PATt). The ECG and the PPG signals were synchronized using a Nexus-10 MK II data acquisition device and Matlab software (R 2014b) for subsequent analysis. An oscillometric cuff-based blood pressure instrument (Ostar, P2) was used as a BP reference during the experiment. Statistical analysis showed no significant difference in the |r| value between mean (15 pulses ± SD) and instantaneous PAT-BP; hence both methods are applicable for BP estimation using the PAT-BP calibration technique.


Sign in / Sign up

Export Citation Format

Share Document