Use of a Simple Contact Bipolar Electrocardiographic Lead in the Precordial Region

2020 ◽  
Vol 88 (4) ◽  
pp. 367-368
Author(s):  
Mario Mc Loughlin ◽  
Sergio Lew
Keyword(s):  
Electrocardiographic Lead ◽  
Simple Contact

A Modular Race Tire Model Concerning Thermal and Transient Behavior using a Simple Contact Patch Description

2013 ◽  
Vol 41 (4) ◽  
pp. 232-246
Author(s):  
Timo Völkl ◽  
Robert Lukesch ◽  
Martin Mühlmeier ◽  
Michael Graf ◽  
Hermann Winner
Keyword(s):  
Load Distribution ◽  
Thermal Condition ◽  
Transient Behavior ◽  
Wheel Load ◽  
Contact Patch ◽  
Fundamental Parameters ◽  
Dry Conditions ◽  
Simple Contact ◽  
Tire Forces ◽  
Descriptive Set

ABSTRACT The potential of a race tire strongly depends on its thermal condition, the load distribution in its contact patch, and the variation of wheel load. The approach described in this paper uses a modular structure consisting of elementary blocks for thermodynamics, transient excitation, and load distribution in the contact patch. The model provides conclusive tire characteristics by adopting the fundamental parameters of a simple mathematical force description. This then allows an isolated parameterization and examination of each block in order to subsequently analyze particular influences on the full model. For the characterization of the load distribution in the contact patch depending on inflation pressure, camber, and the present force state, a mathematical description of measured pressure distribution is used. This affects the tire's grip as well as the heat input to its surface and its casing. In order to determine the thermal condition, one-dimensional partial differential equations at discrete rings over the tire width solve the balance of energy. The resulting surface and rubber temperatures are used to determine the friction coefficient and stiffness of the rubber. The tire's transient behavior is modeled by a state selective filtering, which distinguishes between the dynamics of wheel load and slip. Simulation results for the range of occurring states at dry conditions show a sufficient correlation between the tire model's output and measured tire forces while requiring only a simplified and descriptive set of parameters.

scholarly journals A Simple Contact Mechanics Model for Highly Strained Aqueous Surface Gels

2021 ◽  
Author(s):  
A. L. Chau ◽  
M. K. Cavanaugh ◽  
Y.-T. Chen ◽  
A. A. Pitenis
Keyword(s):  
Simple Model ◽  
Contact Mechanics ◽  
Contact Lenses ◽  
Radius Of Curvature ◽  
Winkler Foundation ◽  
Surface Layers ◽  
Mechanics Model ◽  
Soft Surface ◽  
Simple Contact ◽  
Highly Strained

Abstract Background Soft, biological, and bio-inspired materials are often compositionally heterogeneous and structurally anisotropic, and they frequently feature graded or layered organizations. This design complexity enables exceptional ranges in properties and performance yet complicates a fundamental understanding of the contact mechanics. Recent studies of soft gel layers have relied on Hertzian or Winkler foundation (“bed-of-springs”) models to characterize the mechanics but have found neither satisfactory. Objective The contact mechanics of soft gel layers are not yet fully understood. The aim of this work is to develop a simple contact mechanics model tailored for compositionally-graded materials with soft surface layers under high strains and deformations. Methods Concepts from polymer physics, fluid draining, and Winkler foundation mechanics are combined to develop a simple contact mechanics model which relates the applied normal force to the probe radius of curvature, elastic modulus, and thickness of soft surface layers subjected to high strains. Results This simple model was evaluated with two examples of graded surface gel layers spanning multiple length-scales, including commercially available contact lenses and stratified hydrogels. The model captures the nonlinear contact mechanics of highly strained soft aqueous gel layers more closely than either Hertz or Winkler foundation theory while simultaneously enabling a prediction for the thickness of the surface gel layer. Conclusion These results indicate that this simple model can adequately characterize the contact mechanics of highly strained soft aqueous gel layers.

Artificial neural networks for recognition of electrocardiographic lead reversal

1995 ◽  
Vol 75 (14) ◽  
pp. 929-933 ◽  
Author(s):  
Bo Hede´n ◽  
Mattias Ohlsson ◽  
Lars Edenbrandt ◽  
Ralf Rittner ◽  
Olle Pahlm ◽  
...  
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Electrocardiographic Lead ◽  
Artificial Neural

An Internal Electrocardiographic Lead.

1934 ◽  
Vol 31 (4) ◽  
pp. 441-442 ◽  
Author(s):  
A. Lieberson ◽  
F. Liberson
Keyword(s):  
Electrocardiographic Lead

Contact, Support, and Friction

1986 ◽  
Vol 29 (3) ◽  
pp. 337-355 ◽  
Author(s):  
Ann Leffler ◽  
Richard S. Krannich ◽  
Dair L. Gillespie
Keyword(s):  
Random Sample ◽  
Rural Areas ◽  
Contact Network ◽  
Personal Relations ◽  
Simple Contact

The networks literature has been bedeviled by an assumption that networks convey supportiveness to the exclusion of conflict. In this article, we discuss a method for distinguishing conflict, support, and simple contact network linkages in surveys. We then describe the results of applying this procedure to a random sample of households in several rural areas. We find that conflict does permeate personal relations. We also find that ego's and alters' genders affect the extent and type of frictions that engage them. We conclude by discussing implications of the findings for particular lines of research on stress and on community.

Mechanical response of marble epistyles under shear: numerical analysis using an experimentally validated model

2018 ◽  
Vol 27 (3-4) ◽  
Author(s):  
Ermioni D. Pasiou ◽  
Stavros K. Kourkoulis
Keyword(s):  
Numerical Model ◽  
Stress Field ◽  
Mechanical Response ◽  
Specific Problem ◽  
Shear Loading ◽  
Filling Material ◽  
Experimental Protocol ◽  
Loading Mode ◽  
Traditional Design ◽  
Simple Contact

AbstractThe mechanical response of the restored “connections” of the epistyles of the Parthenon Temple on the Acropolis of Athens is studied assuming that the interconnected epistyles are under shear loading mode. The study is implemented by taking advantage of a numerical model, properly validated on the basis of the data of a recent relative experimental protocol. The main difficulty while studying the specific problem is the co-existence of three materials of completely different mechanical behaviors, i.e. the brittle marble of the epistyles, the ductile titanium of the connector and the cement-based material filling the grooves of the marble in which the connector is placed. The interfaces of this three-material-complex are simulated as simple contact with friction, the coefficient of which is, also, experimentally determined. Taking advantage of the data provided by the numerical model the stress field developed in the connector and the surrounding marble volume is described. Moreover, the forces imposed by the connector on the surface of the groove are quantitatively determined. Furthermore, the model permits a quantitative comparison between the mechanical response of the interconnected epistyles in the presence or in the absence of the “relieving space”. It is definitely concluded that the alternative design of the “connections”, according to which a small portion of the connector’s web is left uncovered by the filling material (relieving space), offers serious advantages against the traditional design, in the direction of reducing the intensity of the stress field developed in the marble volume surrounding the connector, thus, contributing to the protection of the authentic building material of the monument in the case of overloading of the epistyles.

Sign in / Sign up

Export Citation Format

Share Document