Design and Performance Prediction of Small Hydropower Plant Using Treated Effluent in Wastewater Treatment Plant

2013 ◽  
Vol 33 (2) ◽  
pp. 78-83 ◽  
Author(s):  
Chul-Hyung Lee ◽  
Wan-Soon Park ◽  
Won-Kyoung Kim ◽  
Jeong-Yeon Kim ◽  
Kyu-Jung Chae
Keyword(s):  
Wastewater Treatment ◽  
Performance Prediction ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Hydropower Plant ◽  
Small Hydropower ◽  
Treated Effluent ◽  
And Performance

Evolution of the Southpest Wastewater Treatment Plant

2000 ◽  
Vol 41 (9) ◽  
pp. 7-14
Author(s):  
A. Jobbágy ◽  
B. Literáthy ◽  
F. Farkas ◽  
Gy. Garai ◽  
Gy. Kovács
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Phosphorus Removal ◽  
Treatment Plant ◽  
Low Flow ◽  
Nitrate Content ◽  
Nitrogen And Phosphorus ◽  
Treated Effluent ◽  
Processing Wastes

The treated effluent of the Southpest Wastewater Treatment Plant is discharged into a small, low-flow branch of the Danube susceptible to eutrophication. The first, high-load activated sludge system with a hydraulic retention time of 2.5 hrs in the aerated basins, was installed here in 1966. The paper presents the evolution of the technology by illustrating the effects of the different changes carried out since 1991. Reconfiguration of the existing activated sludge basins connected originally in parallel into an arrangement of tanks in series increased the settleability of the sludge as well as the efficiency of COD removal significantly. Introduction of an anaerobic zone preceding the aerated basins facilitated biological excess phosphorus removal with a consequent release in the thickener and digester. Introducing lime addition into the recycled sludge processing wastes significantly improved the performance of the system. However, since there had been no provision built for eliminating the nitrate content of the recycled sludge, efficiency of phosphorus removal proved to be dependent on the eventually occurring nitrification. In order to achieve both an effective nitrogen and phosphorus removal the current technology established in 1999 applies a nitrification and a denitrification filter following the activated sludge unit and uses precipitation for phosphorus removal.

Development of a coliforms monitoring system using an enzymatic fluorescence method

2006 ◽  
Vol 53 (4-5) ◽  
pp. 523-532 ◽  
Author(s):  
A. Morikawa ◽  
I. Hirashiki ◽  
S. Furukawa
Keyword(s):  
Wastewater Treatment ◽  
Monitoring System ◽  
Fluorescence Intensity ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Automatic Measurement ◽  
Fluorescence Method ◽  
Treated Effluent ◽  
Increase Rate ◽  
Rapid Monitoring

A coliforms monitoring system in treated effluent of a wastewater treatment plant has been developed. In order to achieve rapid monitoring within 1 hour, an enzymatic fluorescence method without a culturing process was introduced to this system. It converts the increase rate of fluorescence intensity as enzymatic activity into the number of coliforms instead of converting fluorescence intensity itself. A flow injection analysis is used in this system for automatic measurement. Moreover, it is equipped with the pre-filtering unit to remove the interfering substances in the suspended solids causing deterioration in measurement precision. The good relationship (correlation coefficient of 0.90) between the obtained values using this system and the analysed values using the conventional direct counting method was observed in a test at an existing wastewater treatment plant.

Wastewater reclamation for use in snow-making within an alpine resort in Australia - resource rather than waste

2002 ◽  
Vol 46 (6-7) ◽  
pp. 297-302 ◽  
Author(s):  
Z. Tonkovic ◽  
S. Jeffcoat
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Additional Treatment ◽  
Wastewater Reclamation ◽  
Reclaimed Wastewater ◽  
Pathogen Removal ◽  
Ski Resorts ◽  
Treated Effluent

The Mt Buller Alpine Resort is located approximately 200 km north of Melbourne, in Victoria, Australia. A wastewater treatment plant services the resort and currently treats to advanced nutrient removal standards. The treated effluent is presently discharged into the Howqua River. Most Australian ski resorts are not blessed with abundant snow cover on a regular basis. Artificial snow allows most of the popular ski runs to operate for the whole of the season. At the Mt Buller resort, snow-making is presently limited by lack of water supply in the catchment. The conditions at Mt Buller resort present a unique opportunity to utilise reclaimed wastewater to allow increased snow-making capacity. It is one of the unique opportunities where the wastewater is valued as a resource rather than merely viewed as a waste problem. Wastewater reclamation for snow-making will require additional treatment for pathogen removal. It is proposed that following advanced nutrient removal, the effluent will require further treatment, including membrane ultrafiltration, so as to ensure a minimum of four barriers for pathogen removal. Pilot plant operation of a membrane ultrafiltration system commenced in June 2000 and will continue until the end of 2001, to primarily demonstrate the extent of pathogen removal.

scholarly journals Occurrence of bisphenol A in wastewater and wastewater sludge of CUQ treatment plant

2011 ◽  
Vol 1 (1) ◽  
pp. 3 ◽  
Author(s):  
Dipti Prakash Mohapatra ◽  
Satinder Kaur Brar ◽  
Rajeshwar Dayal Tyagi ◽  
Rao Y. Surampalli
Keyword(s):  
Wastewater Treatment ◽  
Bisphenol A ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Wastewater Sludge ◽  
Process Stream ◽  
High Concentration ◽  
Endocrine Activity ◽  
Treated Effluent ◽  
Major Interest

The identification and quantification of bisphenol A (BPA) in wastewater (WW) and wastewater sludge (WWS) is of major interest to assess the endocrine activity of treated effluent discharged into the environment. BPA is manufactured in high quantities fro its use in adhesives, powder paints, thermal paper and paper coatings among others. Due to the daily use of these products, high concentration of BPA was observed in WW and WWS. BPA was measured in samples from Urban Community of Quebec wastewater treatment plant located in Quebec (Canada) using LC-MS/MS method. The results showed that BPA was present in significant quantities (0.07 μg L–1 to 1.68 μg L–1 in wastewater and 0.104 μg g–1 to 0.312 μg g–1 in wastewater sludge) in the wastewater treatment plant (WWTP). The treatment plant is efficient (76 %) in removal of pollutant from process stream, however, environmentally significant concentrations of 0.41 μg L–1 were still present in the treated effluent. Rheological study established the partitioning of BPA within the treatment plant. This serves as the base to judge the portion of the process stream requiring more treatment for degradation of BPA and also in selection of different treatment methods. Higher BPA concentration was observed in primary and secondary sludge solids (0.36 and 0.24 μg g–1, respectively) as compared to their liquid counterpart (0.27 and 0.15 μg L–1, respectively) separated by centrifugation. Thus, BPA was present in significant concentrations in the WWTP and mostly partitioned in the solid fraction of sludge (Partition coefficient (Kd) for primary, secondary and mixed sludge was 0.013, 0.015 and 0.012, respectively).

scholarly journals Environmental performance of a full-scale wastewater treatment plant applying Life Cycle Assessment

2018 ◽  
Vol 13 (4) ◽  
pp. 1 ◽  
Author(s):  
Thaís Andrade de Sampaio Lopes ◽  
Luciano Matos Queiroz ◽  
Asher Kiperstok
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Full Scale ◽  
Anaerobic Sludge ◽  
Treated Effluent ◽  
Useful Life

Life Cycle Assessment (LCA) was applied to estimate and analyze the environmental impacts from the construction and operation phases of a full-scale wastewater treatment plant (WWTP) located in the municipality of Lauro de Freitas, Bahia, Brazil. The WWTP process consists of the association of an Upflow Anaerobic Sludge Blanket (UASB) reactor followed by four constructed wetlands (CWL) and a disinfection step. The functional unit was defined as one cubic meter of treated effluent during the useful life of this WWTP (20 years). The LCA was carried out using SimaPro® software and the Centre of Environmental Science (CML) assessment method. The environmental impacts during construction phase were mainly from the wooden forms for concrete and the use of reinforcing steel. During the operation phase, the chlorine used as effluent disinfectant caused the greatest impacts in the abiotic depletion and acidification categories. Macronutrient concentrations present in the treated effluent and the methane generated also caused significant environmental impacts during the WWTP’s useful life. The results obtained highlight the importance of the application of a methodology like LCA to assist in decision-making with regard to the implementation, construction and operation of a WWTP.

The Design, Operation and Performance of the New Membrane Bioreactor (MBR) WWTP for the Becket-Chimney Corners YMCA Camps in Western Massachusetts

2009 ◽  
Vol 4 (3) ◽  
Author(s):  
Nancy Oram Vigneault ◽  
Carsten Owerdieck
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Membrane Bioreactor ◽  
Treatment Plant ◽  
Biomass Concentration ◽  
Septic Systems ◽  
Separation Function ◽  
Conventional Activated Sludge ◽  
And Performance ◽  
Reclaim Water

The increasingly stringent requirements for effluent quality and the need to reclaim water are promoting the application of membrane bioreactor (MBR) systems for wastewater treatment. The membrane replaces the solids separation function carried out by the secondary clarifier and sand filter in a conventional activated sludge system. The MBR process effectively overcomes the problems associated with poor settling of sludge. In addition, the use of membranes permits the operation of the bioreactor at higher mixed liquor suspended solids (MLSS) concentrations of 8,000 to 12,000 milligrams per litre (mg/L) compared to a conventional system, which may operate between 2,000 to 4,000 mg/L. The elevated biomass concentration allows for improved removal of both soluble and particulate biodegradable material from the wastewater. The MBR design also reduces the area as well as the reactor volume required for treatment. Two-State YMCA operates Camp Chimney Corners and Camp Becket in Becket, Massachusetts. These two camps were under consent orders to address deficient septic systems and decided to construct a 40,000 gallons per day (151,400 litres/day) wastewater treatment plant and wastewater collection and conveyance system to address septic system problems. A MBR wastewater treatment plant was designed and constructed and began treating wastewater in May 2007. This paper presents the design, operation, and performance of the MBR WWTP.

Sign in / Sign up

Export Citation Format

Share Document