Equivalent circuit modeling in GaN wireless power transmission including stray inductance and capacitance by measuring radiated emission

We establish the method for estimating the stray elements of the GaN-WPT circuit by measuring the radiated emission around the GaN switching device. By controlling the circuit supply voltage, the spectrum peak shift due to the output capacitance of the GaN-HEMT is observed. It is found that these peak shift characteristics include the influence of both the stray wire inductance and stray capacitance. By the fitting using the series resonance model, the value of the stray inductance and stray capacitance can be estimated in the non-destructive measurement in the GaN-WPT circuit.

Research on Electromagnetic-Radiated Emission of Multi-in-One Electric Drive System

The strong electromagnetic interference produced by the electric drive system is the main factor that leads to the strong radiated emission of electric vehicles. It is very important to study the influence of the electric drive system on vehicle-radiated emission by taking the common-mode current of the electric drive system as the interference source. In this paper, the conducted emission model of the electric drive system is proposed, and the common-mode current is calculated by this model. The influence of filter on the common-mode interference current of HVDC cables is calculated and analyzed, and then the radiating antenna effect model of HVDC cables is established. Based on this, a vehicle-level radiated emission simulation model including an electric drive system and DC cables was established. The effectiveness of the conducted emission model was verified by experiments. The effects of different shielding structures on the shielding efficiency of HVDC cables were compared. Quantitative guidance for EMI suppression design of multi-in-one electric drive system design can be provided by the model in this paper.